The Gra-Vue XIO 9030HDDEM-4AUD-FS-1U 4-Channel Audio De-Embedderfrom Gra-Vue XIO 9030HDDEM-4AUD-FS-1U 4-Channel Audio De-Embedderis a modular board for installation in XIO series rackmount frames. It splits off two user selectable stereo pairs from the SDI stream and outputs those via balanced terminal block connectors. In addition to being able to select the channels, it is also possible to select the de-embedding mode. For example, having the outputs follow the input channels, crossing the output channels, mixing output, and more. These setting are changed using DIP switches on the board.

The board features two mirrored SDI loop outputs so that video can be delivered to two downstream destinations without requiring a separate distribution amplifier. It will pass both SD and HD resolution signals, and supports bandwidths up to 1.5 Gb/s (HD-SDI).

Note: This version is configured for the 1RU frame. There is another model available if you use the 3RU frame.

De-Embedds Two Stereo Pairs From SDI    Supports SD and HD-SDI up to 1080p    Dual Mirrored SDI Outputs    Frame Sync with Reference Input    For XIO Series Rackmount Frames    Configured for 1RU Frame

Reference input with support for the following sync modes: INT, single EXT, and Global EXT

Automatic signal detection. Supported signals include: 625i50, 525i60, 720p, 1080i, 1080p, and 1080psf

Audio group to embed to may be selected via DIP switches

Provides automatic signal equalization to enable cable runs up to 328' when using Belden 1694A cable

Supports hot swapping of connectors

Provides LED lights to indicate the status of signals and power supply

Supports SNMP, and can be managed and monitored in real-time using XIO NET via an Ethernet interface

For use in broadcast television and other professional video applications

Related Questions and Answers

Q: 1. Will this charge the battery for my panasonic lumix g7?

A: Yes, this is the charger you need for that battery.

Q: 2. Will this unit play .wav files from the USB stick?

A: Yes, the Technical Pro H1502URBT 5.2-Channel Audio Receiver can play .wav files from a USB drive.

Q: 3. Will this charge a battery for a Lumix LX-10 (battery DMW-BLH7PP)?

A: The Panasonic DE-A79BB Battery Charger is not compatible with the BLH7 series batteries. You can use this Watson charger instead:https://bhpho.to/46z1nf4

Q: 4. Will this charge the battery for my panasonic lumix G7 that came with the camera?

A: Yes, this will charge the battery that came with the Panasonic G7

Q: 5. When the unit is turned off, does the volume go back to the same level when it's turned back on?

A: Yes, the volume level that you have set will remain when you turn the unit off and back on again.

Q: 6. The slides I have are quite old - circa 1960.. Each slide has been encased in metal. Will the slide go into the viewer as is?

A: Yes - I found some old slides my father had that are in an Airequipt Slide Changer holder each slide is in a metal frame. Each individual slide will fit in my Kaiser diascop mini 3 but only horizontally

Q: 7. Are Preamp outputs volume controlled with the master volume control as well as the PreOut level control knob?

A: Preamp controls each channel individually, and the master controls the summed signals.

Q: 8. will this charge a panasonic battery charger nca-yn101g battery?

A: The Panasonic DE-A79BB Battery Charger will charge the Panasonic DMW-BLC12 Rechargeable Lithium-Ion Battery (7.2V, 1200mAh) or any off-brand replica of this battery.

Q: 9. Is the the charger for the Panasonic Lumix GH2 camera?

A: Yes, it is compatible with the GH2 battery.

Q: 10. Is this charger compatible with the GF2 battery: DMW-BLD10PP?

A: No, Panasonic DE-A79BB Battery Charger is not compatible with the DMW-BLD10PP. A compatible charger is the Watson Compact AC/DC Charger Kit with Battery Adapter Plate for DMW-BLD10, BH # WACPABLD10K. https://bhpho.to/3jENsRj