The Gra-Vue XIO 9030HDDEM 4-Channel Audio De-Embedder Frame Syncfrom Gra-Vue XIO 9030HDDEM 4-Channel Audio De-Embedder Frame Syncis a modular board for installation in XIO series rackmount frames. It splits off two user selectable stereo pairs from the SDI stream and outputs those via balanced terminal block connectors. In addition to being able to select the channels, it is also possible to select the de-embedding mode. For example, having the outputs follow the input channels, crossing the output channels, mixing output, and more. These setting are changed using DIP switches on the board.

The board features two mirrored SDI loop outputs so that video can be delivered to two downstream destinations without requiring a separate distribution amplifier. It will pass both SD and HD resolution signals, and supports bandwidths up to 1.5 Gb/s (HD-SDI).

Note: This version is configured for the 3RU frame. There is another model available if you use the 1RU frame.

De-Embedds Two Stereo Pairs From SDI    Supports SD and HD-SDI up to 1080p    Dual Mirrored SDI Outputs    Frame Sync with Reference Input    For XIO Series Rackmount Frames    Configured for 3RU Frame

Reference input with support for the following sync modes: INT, single EXT, and Global EXT

Automatic signal detection. Supported signals include: 625i50, 525i60, 720p, 1080i, 1080p, and 1080psf

Audio group to embed to may be selected via DIP switches

Provides automatic signal equalization to enable cable runs up to 328' when using Belden 1694A cable

Supports hot swapping of connectors

Provides LED lights to indicate the status of signals and power supply

Supports SNMP, and can be managed and monitored in real-time using XIO NET via an Ethernet interface

For use in broadcast television and other professional video applications

Related Questions and Answers

Q: 1. When the unit is turned off, does the volume go back to the same level when it's turned back on?

A: Yes, the volume level that you have set will remain when you turn the unit off and back on again.

Q: 2. Can you replace the bulb easily if it burns out?

A: Yes it is easy to change the bulb

Q: 3. Will this charge the battery that came with my GX9?

A: It will fit in this battery charger, but it won't click and lock into place properly so it might fall out. However, all of the pins are the same and it will fit and charge.

Q: 4. What is how may RMS per channel this item?

A: The RMS power isn't listed by the manufacturer.

Q: 5. How many slides fit in at once? Hoping not to change one at a time.

A: It's a single slide viewerthat's the whole point. If you want to view multiple slides at once, get a slide projector.

Q: 6. Can A and B speakers be on at the same time?

A: Yes, you can use both the A and B speakers.

Q: 7. Does it take 2 x 2 slides ?

A: I use it for viewing 35mm mounted slides, which measure 2 x2 . Side of box reads: Full coverage, big picture viewing of 35mm, and all other 2x2in (5x5cm) mounted slides.

Q: 8. Will this charge a battery for leica v lux 5? Thanks

A: The correct charger for the Leica V-Lux 5 is the Leica Battery Charger BC-DC 12 For V Lux 4, BH#LEBCBCDC12V

Q: 9. Is the the charger for the Panasonic Lumix GH2 camera?

A: Yes, it is compatible with the GH2 battery.

Q: 10. Is there a charger for the battery supplied with Panasonic Dc-fz1000m2 camera?

A: The Panasonic DE-A99BB Battery Charger For DMW-BLE9/DMW-BLG10, B&H # PADEA99BB • MFR # DE-A99BB, was the external battery charger designed for use with the Panasonic DMW-BLG10 Li-ion Battery included with the purchase of the Panasonic Lumix DC-FZ1000 II Digital Camera. Unfortunately, this battery charger is no longer available for purchase. As such, if you need an alternative replacement battery charger, I would recommend either the Watson Compact AC/DC Charger for DMW-BLE9, DMW-BLG10, or BP-DC15 Battery, B&H # WACPADMWBLE9, the the hahnel Professional Charger PROCUBE2 for Select Fujifilm/Panasonic Batteries, B&H # HAPROCUBE2FP, or the Panasonic DMW-BLG10 Li-Ion Battery & Charger Travel Bundle, B&H # PADMWZSTRV, for your usage needs.