The Gra-Vue XIO 9060FS HD/SD-SDI Frame Sync Processor 3RUfrom Gra-Vue XIO 9060FS HD/SD-SDI Frame Sync Processor 3RUis a modular board than installs in the 3RU version of the XIO series rackmount frame. It features an HD/SD-SDI input that can accommodate signals up to 1080p60. There is also a composite video/tri-level reference input so the SDI signal can be synchronized to an external source such as a house clock. The signal is also equalized, which helps restore its integrity following a long cable run. Finally, the processed video is output through four mirrored HD/SD-SDI outputs.

Auto-Sensing HD/SD-SDI Input    Four Mirrored SDI Outputs    Composite/Tri-Level Sync Input    20-Bit Processing & Signal Equalization    For 3RU XIO Series Rackmount Frame

Auto-switching SD-SDI/HD-SDI input

Supports Active Format Description (AFD) metadata codes for aspect ratio and other information

Can be managed and monitored remotely over Ethernet using XIO Net

Internal 20-bit signal processing

LEDs show real-time indication of signal and power supply status

Connectors support hot swapping

Related Questions and Answers

Q: 1. For 3 keys cameras do I have to buy 3 Blackmagic Design Ultimatte 12 4K Keyers for each camera?

A: The Blackmagic Design Ultimatte 12 4K Keyer Advanced Compositing Processor is used with a single camera, and if you have multiple cameras in your production that need keying, you will need multiple Blackmagic Design Ultimatte 12 4K Keyer Advanced Compositing Processor.

Q: 2. Can i use a 4k camera with internal recording and send video signal via hdmi at the same time? Does it downscale automatically?

A: The Blackmagic Design Ultimatte 12 HD Mini Keyer/Advanced Compositing Processor does not downscale at this time. It would be recommended to check with your camera's capability to record 4K internally and send a 1080p signal via HDMI in order to confirm compatibility.

Q: 3. Can this be used between Sony FS7 & FOR A - HVS 110 4 K switcher ? If so what is the maximum distance cable we can use for live switching ?

A: Sorry, can't help. I sent it back. I was using it between an X70 or A7s and Odyssey 7Q, and it got unreasonably hot in minutes.

Q: 4. Do I retain camera control capabilities (ISO, shutter, focus) if I use the HDMI Ultimatte 12 with my BMPCC and ATEM Mini setup?

A: Yes it does. Just make sure to send the return feed from the ATEM Mini to the Ultimatte 12.

Q: 5. in relation with your answer “You will need at least 1 Ultimatte 12 and an Ultimatte Smart Remote 4 to control them and key your set. You will also need cameras and a virtual set software.” what is unclear to me is which set is going to make the render for the camera motion is ultimate 12 does that?

A: The Ultimate only does the keying of the image camera over background. It does not have virtual set type rendering of the image or modify the background.

Q: 6. HOw the audio works in multiview?

A: In Quad-Split mode for the Decimator DMON-4S, audio can be selected from any source to play as for the audio for other sources.

Q: 7. We are converting HDMI to SDI using a BMD micro converter so we can send a teleprompter PC output to our router. However, our teleprompters only have composite BNC. Can we use this to convert the SDI signal coming from our converter to composite BNC and send it to our router?

A: Yes, the Decimator 2 will be able to convert an SDI signal to composite BNC.

Q: 8. have you got multiviewer with analog audio input , and analog video input with other features of MI 16?

A: This is the closest we match we can offer : Gra-Vue VIO MVS-16HD-D 1U Multiviewer B&H # GRVIOMVS16HD

Q: 9. how to upgrade its firmwere? actually we are facing white flashes at its quad output.plz help us in this regard.

A: Please contact SWIT directly for technical support: SWIT: Tel: (866) 986-7948 or (408) 260-8258 Email info@swit.us

Q: 10. Is it possible to use the loop out and multi view at the same time? My setup is that I will have 2 SDI inputs from my PTZOptics cams, loop those out to my BMD Mini Recorders, but I want to be able to monitor both of those feeds on the same screen. I'm also wondering what the output resolution of this device is? Is it dependent on the inputs? Right now I'm having an issue where my PTZOptics cams have to be set to 1080p30 as that's the max my BMD Mini Recorders will support. The cams can output HDMI and SDI simultaneously, so I thought I'd just plug the HDMI feed into one of my monitors, but my monitors apparently don't support 1080p30, they throw an error asking for 60Hz. Any feedback / suggestions is appreciated.

A: Hi Taylor, This is Jules from Product Support at Symbiosis, Decimator's master distributor for your region. You can configure a DMON-4S to receive SDI on inputs 1 & 3 then use the ports for inputs 2 & 4 as loop outputs of inputs 1 & 3 respectively. Inputs 1 & 3 are still available to use in the multi-viewer, although obviously you then only have two inputs available for up to four windows, depending on how many windows you wish to show on screen. The four HDMI outputs can be individually controlled so each output can be configured to either be the output of the multi-viewer or a loop output of any of the SDI inputs. If you need a hand configuring it when it arrives please feel free to contact us at support@symbiosis.com. I hope this helps. Kind regards Jules