The Gra-Vue XIO 9080HDEOP SDI to Fiber Transmitter, in a 1RU version, consists of an input/output transmitter card and 1RU interface panel. The interface panel installs the card in a rack horizontally in a 1RU setup. The card converts one 3G/HD/SD SDI signal to optical fiber and transmits the signal for up to 12 miles to an XIO 9080HDEOP receiver, sold separately.

The card also features an SDI loop output for monitoring your signal locally on an SDI display. The SDI input and loop output support cable distances up to 230 ft in 3G, 328 ft in HD, and 656 ft in SD using Belden 1694A cables. The input return loss is >15dB for 5MHz to 1.5GHz transmissions, and >10dB for 1.5GHz to 3GHz transmissions. The fiber output is an SC-APC connector compatible with broadcast standards. It supports singlemode and multimode fiber cables. Please note, the card has two additional SDI connectors, but they are not functional; they are just part of the card models that Gra-Vue uses but are not enabled for any performance.

The card supports any input data rate within the range of 270Mbps to 2.97Gbps, and it converts using an efficient photoelectric conversion process. It can be monitored and managed in real-time using an optional Gra-Vue XIO NET Management Module via an Ethernet-connected PC. LED indicators display the signal status and power status. The card is hot swappable with other cards.

In/Out Card & 1RU Interface Panel    Converts 1 3G/HD/SD SDI Signal to Fiber    Transmits for Up to 12 Miles    Installs Horizontally in 1RU Setup    SDI Loop Output    >15dB Input RL for 5MHz to 1.5GHz    >10dB Input RL for 1.5GHz to 3GHz    SC-APC Fiber Connector    Supports Singlemode & Multimode Cables    Supports Real-Time Monitoring/Management

• Consists of input/output transmitter card and 1RU interface panel
• Converts one 3G/HD/SD SDI signal to optical fiber
• Transmits for up to 12 miles to an XIO 9080HDEOP receiver, sold separately
• The interface panel installs the card horizontally in a 1RU setup
• SDI loop output for local monitoring
• >15dB input return loss for 5MHz to 1.5GHz, >10dB for 1.5GHz to 3GHz transmissions
• SC-APC fiber connector
• Supports singlemode and multimode fiber cables
• Real-time monitoring and management using XIO NET module via Ethernet-connected PC
• LED signal and power status indicators
• Hot swappable with other cards
• Supports Simple Network Management Protocol (SNMP)

Related Questions and Answers

Q: 1. Are the recievers and transmitters weatherproof ? I mean you rarely need 2000m transmission indoors.

A: This are not weatherproof products.

Q: 2. In a multicam enviroment, how many systems can I have on at the same time?

A: The number of systems you could use in the same environment will depend on how much RF interference there is, but the Accsoon CineView 2 SDI/HDMI Wireless Video Transmitter/Receiver Kit supports up to 20 channels.

Q: 3. To how many receivers and apps can the trasmitter transmit simultaneously. This is a question for Hollyland?

A: When the transmitter from the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System is set to broadcast mode, the a single transmitter can output to up to four receivers and two smart devices running the app.

Q: 4. The slides I have are quite old - circa 1960.. Each slide has been encased in metal. Will the slide go into the viewer as is?

A: Yes - I found some old slides my father had that are in an Airequipt Slide Changer holder each slide is in a metal frame. Each individual slide will fit in my Kaiser diascop mini 3 but only horizontally

Q: 5. I see there is no loop out on the transmitter for SDI, can I use the HDMI out on the transmitter if I use the SDI input?

A: Yes, the Accsoon CineView 2 SDI/HDMI Wireless Video Transmitter/Receiver Kit transmitter can loop out the SDI input through the HDMI output.

Q: 6. Can I use one system transmitting to a single receiver & a second system transmitting another camera to 2 receivers in one room?

A: You can use two different transmitters of the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System in the same room transmitting to different receivers, but performance will depend on your local wireless interference and size of the room. Make sure that your receivers are placed at least 12" apart for the best performance.

Q: 7. Hello! Is it possible to transmit using 4 systems with 4 camaras?

A: When using the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System, you could work with four kits of TX and RX in the same location. Please note that you will be limited to two sets if you are working in broadcast mode.

Q: 8. How many slides fit in at once? Hoping not to change one at a time.

A: It's a single slide viewerthat's the whole point. If you want to view multiple slides at once, get a slide projector.

Q: 9. is the Transmitter alone is required to send video signal to phone app without buying the receiver ?

A: You will be able to transmit to up to 500 feet and output wirelessly to 1–4 apps when using just the Accsoon CineView 2 SDI/HDMI Wireless Video Transmitter.

Q: 10. 0 delay? Is this intended for live video?

A: The 2000M-H system is rated at 60 MS for latency. It is very low in latency and can be used for live video.