The Gra-Vue XIO 9090DLY-HD20S HD/SD-SDI Video Delay 3RUfrom Gra-Vue XIO 9090DLY-HD20S HD/SD-SDI Video Delay 3RUdelays an HD- or SD-SDI video signal up to 20 seconds and features frame sync. It is part of a modular system, and requires the 3RU version of the XIO frame to act as a host device. Audio separation is possible, meaning any SDI-embedded audio can be delayed separately from the video stream by ±15 frames for situations arising from audio sync issues. The delayed program signal is output through three HD/SD-SDI connectors, allowing multiple downstream devices to be connected without requiring additional distribution hardware.

Delays HD/SD-SDI Video up to 20 Seconds    Three HD/SD-SDI Program Outputs    Audio/Video Offset up to ±15 Frames    Frame Sync with Reference Input    Remote Controllable Via Web UI

HD/SD-SDI input resolution auto sensing

Reference input allows synchronization to an external source, such as a common house clock

Advanced FPGA (field-programmable gate array) and DSP (digital signal processing) processing technology

Accurately adjust delay time frame by frame

Supports horizontal and vertical (H/V) phase adjustment

Program loop-out when powered off

LEDs indicate power and video signal status

Supports SNMP protocol

Built-in Webserver allows user to edit clip or configure device from a WEB UI

Related Questions and Answers

Q: 1. can this model TVLogic LVM-170A do split screen to monitor 2 set of camera?

A: No, although there are many advanced features in this monitor, the TVLogic LVM-170A does not support a split screen of 2 images. http://www.tvlogic.tv/new/M_Spec.asp?sidx=67

Q: 2. Can this be used between Sony FS7 & FOR A - HVS 110 4 K switcher ? If so what is the maximum distance cable we can use for live switching ?

A: Sorry, can't help. I sent it back. I was using it between an X70 or A7s and Odyssey 7Q, and it got unreasonably hot in minutes.

Q: 3. Can this be used to pull focus?

A: This is a Wireless Video Transmission System, not a wireless follow focus. However you could use this product in conjunction with a wireless follow focus system to view the video.

Q: 4. how much does an L-Battery Last? NPF-970 or 990

A: We used a SWIT battery Sony equivalent for a hockey game, which is around 3 hours and we had no problems. The Sony 970 should be the same.

Q: 5. Could I use this product for a video wall of three monitors? I would like to be able to display a 1x3 video on these monitors at 1080P resolution for each monitor.

A: Dear Kelly, This is Jules from product support at Symbiosis, Decimator's master distributor for your region. The MD-Quad has four 3G-SDI inputs, one 3G-SDI output and one HDMI output. Both outputs carry the same picture at the same format. You wouldn't be able to drive three monitors with different tiles of your source to produce a video wall. The MD-Quad effectively works the other way round to take up to four inputs and put them onto one monitor. I hope this helps but if you have any questions please feel free to contact us on support@symbiosis.com. Kind Regards Jules

Q: 6. How much latency is added to the signal when using the loop output? Thanks!

A: loop out should be 0. if it re-clocks it might be 1 frame

Q: 7. Will this work with the atomos inferno. This is 3sdi atomos is 12sdi ?

A: Yes it will. The Atomos Inferno accepts signals up to 12G-SDI, it can accept a 3G-SDI signal as well.

Q: 8. Does this transmit audio over both the SDI and HDMI? My unit does not seem to have audio and I can't find a setting for it.

A: It should transmit audio. Check the output of your camera

Q: 9. Which end connects to the camera, the transmitter or receiver?

A: With systems like this you Transmit the signal from the camera to a monitor that has a receiver on it. The Transmitter will go with the camera.

Q: 10. Is this compatible with the Cinegears 150m Receiver?

A: No this is Not compatible with the Cinegears 150m Receiver