Gra-Vue Mvio Hd/Sd-Sdi Signal Delay Device

Gra-vue Mvio Hd/sd-sdi Signal Delay Device

Product Code: eq175807
Availability: In Stock

$8,996.85 $12,775.53

Qty

8 reviews Write a review

Description
Reviews (8)

The Gra-Vue MVIO HD/SD-SDI Signal Delay Devicefrom Gra-Vue MVIO HD/SD-SDI Signal Delay Deviceenables delaying an HD-SDI signal up to 20 seconds. Common applications for signal delay include live production scenarios where the audio is out of sync or to seamlessly mix footage being captured locally with a satellite feed. The original un-delayed signal is looped back out along with two mirrored HD/SD-SDI outputs of the delayed signal.

Delays HD-SDI Video up to 20 Seconds Dual Mirrored HD/SD-SDI Outputs SD/HD-SDI Loop-Through Output RS-232 Port for Remote Operation Half-Width 1RU Rackmoutable Form Factor

Connectivity
Input	1 x HD/SD-SDI on BNC Impedance: 75 ohm
Outputs	1 x HD/SD-SDI loop-out 2 x HD/SD-SDI on BNC Impedance: 75 ohm Level: 800 mV ±5% Jitter: < 0.2 UI at 100 KHz
Supported Resolutions	525i 625i 720p 1080i: 50, 59.94, 60 1080p: 23.98, 24, 25, 29.97
Reference	1 x Composite BNC input Impedance: 75 ohm
Network	1 x RS-232 on DB-9 female
Performance
Maximum Delay	20 seconds for HD-SDI
General
Power Requirements	110 to 250 VDC
Power Consumption	36 W
Operating Temperature	41 to 77°F / 5 to 25°C
Rack Height	1 RU
Dimensions	8.6 x 17 x 1.9" / 219 x 432 x 48 mm
Weight	Not specified by manufacturer
Packaging Info
Package Weight	7.5 lb
Box Dimensions (LxWxH)	23 x 19.4 x 6.6"

Supports SD-SDI and HD-SDI along with embedded audio

The delay can be adjusted frame-by-frame

Audio mute button eliminates embedded audio if desired

RS-232 port for remote operation

Automatic signal bypass with device powered off

Supports SNMP Web protocol

Half-wide 1U rackmountable chassis

Related Questions and Answers

Q: 1. How much latency is added to the signal when using the loop output? Thanks!

A: loop out should be 0. if it re-clocks it might be 1 frame

Q: 2. What is the video latency of this device as seen at the computer?

A: The latency of the Magewell USB Capture SDI Plus, One-Channel 2K Capture Device would depend on the resolution and frame rate of the source material. You can find a list of the tested latencies here: https://bhpho.to/4bOIhUc.

Q: 3. Does this device get overheat after 4 hours? I can't see any vent system

A: We are not aware of any overheating issues. This can even operate between 32 to 122°F. There are no vents, but the heat sync within the unit helps.

Q: 4. this work for streaming?

A: Yes, the ANDYCINE U3S SDI to USB 3.0 Video Capture Device is a streaming device that acts as a webcam.

Q: 5. We are converting HDMI to SDI using a BMD micro converter so we can send a teleprompter PC output to our router. However, our teleprompters only have composite BNC. Can we use this to convert the SDI signal coming from our converter to composite BNC and send it to our router?

A: Yes, the Decimator 2 will be able to convert an SDI signal to composite BNC.

Q: 6. Is the 3.5mm audio-in jack mono TS or stereo TRS??

A: The following unit offers stero sound.

Q: 7. Is there a USB-C version of this device, for using with an M1 Macbook Pro? Or do people just use a USB-3 to USB-C adapter?

A: Yes. Please review the following item Angelbird USB Type-C Female to USB Type-A Male Adapter BH #ANUSBAC • MFR #USB-A-C https://bhpho.to/3HBFEH9

Q: 8. Does the device need to be connected to the Mac's thunderbolt 3 port directly to output 10 bit signal, or can it be connected to a daisy chain port on another monitor?

A: The Blackmagic Design UltraStudio Monitor 3G 3G-SDI/HDMI Playback Device can be connected via a daisy-chain Thunderbolt connection.

Q: 9. Does this device USB 3.0: Compatible with USB 2.0 computers ?

A: no this will NOT work with USB 2.0 computers, USB 2.0 does not have the bandwidth to support the Video signals.

Q: 10. Is this device USB bus powered?

A: Yes.

Michael	04/08/2024
[1 RU] The KanexPro did exactly what I needed it to do! 5

Andrew	11/07/2024
[110 to 250 VDC] Exactly as advertised. Great quality and dual 90 degree connections. Perfect length from camera to transmitter/monitor. 5

Gary	02/06/2024
[1 RU] A great passive 3-source input/1-output home audio solution to solve for exactly what I had in mind. Very high quality, USA made ROLLS® device with a small footprint, perfect for my cluttered desktop. Photo shows the SS32 Mini Route 3 (on top of my powered left-side audioengine® speaker) with computer audio and IPad (foreground) sources connected and selectable into the speaker(s). Soon a third source, a turntable [w/ built-in preamps] will be located in place of the printer you see there to the left side of the desk. Awesome. And that goes for B&H too, you know! 5

anyonymous	27/05/2024
[7.5 lb] Product allows me to hook up my hear aid connection to multiple devices. Just super. Easy to install and operate. 5

Anonymous	04/05/2024
[110 to 250 VDC] goodgood 5

Timothy	03/05/2024
[36 W] Worked as advertised 5

Trevor	29/04/2024
[7.5 lb] I kept having problem with three different audio switches. At best with a ground loop isolator and the volume turned down on my powered speakers, I could switch between headphones and not have the speakers hum too much. I added the ROLLS SS32, and at first there was some interference. THEN I just went ahead and removed the ground loop isolator completely and the heavy duty switch does it's job with absolutely no noise. I think this is the only switch that actually works! Don't cheap out on a garbage switch. They're not the same. 5