Ram Mounts Medium Tough-Clamp 1" Rubber Ball

Ram Mounts Medium Tough-clamp 1" Rubber Ball

Product Code: eq175853
Availability: In Stock

$82.47 $106.39

Qty

18 reviews Write a review

Description
Reviews (18)

The RAM Mounts Medium Tough-Clamp 1" Rubber Ballfrom RAM Mounts Medium Tough-Clamp 1" Rubber Ballis designed of corrosion resistant stainless steel hardware. It includes swiveling jaw-end pads that provide stable, even-gripping, and protection of the mounting surface. Lastly, its form factor allows it to work in tight spaces.

Stainless Steel Hardware Swiveling Jaw-End Pads Built-In Lanyard Holes Quick Release of Clamp Clamps to 1.75"-Thick Surfaces Clamps to 0.75-1.125"-Diameter Rails

Parameters
Ball	1" (2.5 cm) rubber ball "B" size
Material	High strength composite
Dimensions	Clamping Dimensions: Flat surfaces and square rails from 1.75" (4.4 cm) thick Round rails from 0.75-1.125" OD (1.9-2.85 cm) OD
Packaging Info
Package Weight	0.25 lb
Box Dimensions (LxWxH)	4.9 x 4.9 x 1.7"

High strength glass filled nylon construction with corrosion resistant stainless steel hardware

Swiveling jaw-end pads provide stable, even gripping and protection of mounting surface

Clamp jaw is configured for round, flat and odd shapes

1" rubber ball is compatible with numerous RAM arms and mounts

Small form factor that accommodates tight spaces

Built-in lanyard holes

Quick engage and release of clamp

Related Questions and Answers

Q: 1. Will this product fit to a Manfrotto 290 xtra Tripod?

A: Yes, it will fit.

Q: 2. How is this Lever-Release Clamp vs the screw knob version?

A: Excellent alternative. First it's quicker. Second, you don't have the protruding knob. But in final function mode, either one will do the job.

Q: 3. How easy is it to do fine adjustments for landscapes when shooting at 200-400mm? Is the tension knob useful for this?

A: It's easy to adjust using the tension knob. The tension knob is easy to grip as well.

Q: 4. Will this product work with a RRS Plate for Sony A7II?

A: Yes, it will.

Q: 5. Is it normal that the camera shifts a bit when tightening the main knob when zooming at 400+mm?

A: The camera can shift very slightly when tightening any of the knobs on the Acratech GXP-SS Ball Head with Arca-Type Compatible Lever Clamp.

Q: 6. will this ballhead hold a niko d800 and 80-400 lens?

A: That lens and camera weigh nearly 6 lbs, which is too close to the load capacity of 8.8 lbs. You can never have too much capacity. This RRS ballhead would be a much better option: https://www.bhphotovideo.com/c/product/1301053-REG/really_right_stuff_bh_30_pro_bh_30_ballhead_with_mini.html

Q: 7. Is the 2545T compatible with GXP and can it be folded back smoothly?

A: The Acratech GXP-SS Ball Head with Arca-Type Compatible Lever Clamp will work on the Gitzo GIGT2545T Traveler Series tripod. Note it will not be able to fold in reverse completely with it attached.

Q: 8. Is the BH-25 the best choice for use on a platypod ultra? I plan on using it with my Olympus OMD EM1 Mk2 with a 12-40MM lens. Or should I step up to the BH-30 for this use?

A: The Really Right Stuff BH-30 Ball Head with Compact Lever-Release Clamp B&H # REBH30LR would be better to use with the Platypod Ultra since it has nearly double the load capacity of the BH-25.

Q: 9. Does this order come with quick release plate?

A: This ball head does not come with a quick release plate.

Q: 10. What are the overall dimensions of the device?

A: The height of the Really Right Stuff BH-30 Ball Head with Compact Lever-Release Clamp is 3 inches (75 mm) and the base diameter is 1.2 inches (30 mm). The unit weighs 11.2 oz (318 g).

Lachlan	15/09/2024
[0.25 lb] Good quality, as you would expect from RAM. Compared with normal RAM balls the tough-ball series have a number of advantages; the hex nut section allows it to be tightened down better, the ball finish is much nicer, allowing for smoother movements in the sockets, the general build quality is better. A quick note on the picture. RAM does not bother to take photos that accurately depict the length of the threaded post. This is true for this particular product, but the length listed in the product description seems to be accurate. 5

Uwe	15/09/2024
[0.25 lb] It is doing what it should. 5

anyonymous	14/09/2024
[0.25 lb] High quality product 5

Baldy	12/09/2024
[0.25 lb] Good Price , fast delivery , I use them to clamp on 1 rail , led flood lights 2lb each, very sturdy, jaws open adequatly. Solid piece of hardware 5

Sournote	07/09/2024
[0.25 lb] Don't let the small descriptor mislead you. This clamp is large enough if you are planning to use it on just about any standard sized tube (1-1.5 inch) or railing. Mine is coupled with a medium length jointed arm and a holder for a tablet I have for multiple uses. My tablet with the cover is a tad on the heavy side and this clamp eliminates worries about flimsier alternatives. I use it on a mic stand for playing music, the pedestal guard on my boat for a chart plotter application and clamped to the yoke in an airplane to secure an electronic flight bag application and this clamp works in all 3 situations. The tough part of the description is right on. This clamp is definitely built tough for multiple applications. 5

Phillip	14/08/2024
[0.25 lb] A solid piece for your RAM Mount system if it requires mounting to a tube up to 1 1/2 inches thick. Stays solid once mounted, you can tighten it pretty good without over-tightening the knob. Allows you to put your system in different areas where tubing exists. Recommended. 5

Braten	03/08/2024
[0.25 lb] I'm using this to attach a cell phone to the handlebar of a motorcycle It holds very firm and does not move once tightened. However be aware that even if it is a size "small" it is a little larger and bulkier than it looks. 5