The white Da-Lite 24856 50x80 Tensioned Advantage Deluxe Screenfrom Da-Lite 24856 50x80 Tensioned Advantage Deluxe Screenis designed to be concealed neatly in a ceiling when not in use, which makes it ideal for corporate conference rooms. The screen can be installed in two stages; the screen case can be installed during construction, and the screen assembly can be attached during the finishing stage. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets allow you to attach the screen housing to the structure above the drop ceiling. Closure doors keep the screen out of sight when it isn't being used.

The HD Progressive 1.3 surface has a gain of 1.3, 150° viewing angle, and is ideal for applications where projector brightness and screen size require an increase in gain. The pure white HD Progressive surface offers true color reproduction, and allows for more flexibility with ambient light conditions. This seamless surface also allows for easy viewing of detail in video as well as charts and graphs in a corporate setting. HD Progressive 1.3 can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. This surface has also achieved GREENGUARD GOLD Certification. Each side of the material uses a tab guide cable system to maintain even lateral tension and hold the surface flat. This helps to ensure that pixels from the display image don't overlap with one another. Tensioning also helps to prevent creases or folding of your screen. A custom slat bar with added weight maintains vertical tension on the screen surface.

For controlling the screen, a three-position Decora-style wall plate is included, along with a cover switch. Low Voltage Control allows the screen to be controlled via a low voltage signal or momentary dry contact from a third-party control system. The LVC is necessary if you are using an IR or RF remote to control your screen.

94" Diagonal    16:10 Aspect Ratio    HD Progressive 1.3 Surface    1.3 Gain, 150° Viewing Angle    Black Backing on Surface    Tensioned for Flat Image Display    110-120 VAC, 60 Hz Motor    Three-Button Decora-Style Wall Switch

The screen has two motors, both mounted inside the case. One motor operates the door at the bottom of the case, and the other controls the viewing surface.

The electrical junction box is internally integrated into the housing, making it possible to install the housing, and then wire to the building's electrical system during construction.

Smooth Roll Technology to keep your screen flat.

Slim-Tab, a lower profile, and strong tab design to keep your screen taut.

White powder-coated case with white endcaps and closure doors for a clean aesthetic.

The case is UL Plenum rated.

Related Questions and Answers

Q: 1. How would I attach an Elinchrom light? The black barrel is too wide and the brass fitting too narrow. Thank you.

A: Sorry I can't help,I do not use those lights.I use AB/Paul Buff.

Q: 2. can extensions be added to this arm for example if we need to to be 18 inches instead of 9 ? I am looking for a wall mount that can be swung out of the way for a small camera so when we use the camera we will swing it out when we are not using the camera it can be stored against the wall

A: Yes, I have ordered many of these units and mixed and matched the poles to make several mounts of varying sizes. Each pole extension uses the same 1/4 -20 screw size, so even the camera could mount directly to the pole rather than the ball mount.

Q: 3. Does this zoom controller work with the Canon CN-E 18-80mm lens?

A: Yes, the VariZoom VZPGC20 20-Pin Zoom Control for Canon CN-E 18-80mm & 70-200mm Lenses is compatible with the Canon CN-E 18-80mm lens.

Q: 4. Can the EL-Skyport Transmitter Plus be used with a Canon 430EX II Speedlite as a slave?

A: You can but you need the EL-Skyport receiver. https://a href= http://www.bhphotovideo.com/c/product/1247560-REG/elinchrom_el19369_el_skyport_receiver_plus.html target= _blank www.bhphotovideo.com/c/product/1247560-REG/elinchrom_el19369_el_skyport_receiver_plus.html/aNot 100% sure the setup makes sense though as the Elinchrom flashes are MUCH more powerful...

Q: 5. Are all of the screws and sockets on all parts 1/4-20?

A: Yes they are

Q: 6. how far does the arm extend?

A: Using the included aluminum shafts it can extend 2 , 4 or 6 .

Q: 7. Will this work on the CN17x17 Cine Servo Lens?

A: It will not. This product is for the Canon CN-E 18-80mm and 70-200mm Lenses only.

Q: 8. Does this control come with a cable long enough to mount to a pan bar?

A: The cable is 40 inches long, plenty for mounting on a tripod panbar. (Or as this former movie camera operator would say, panhandle.)

Q: 9. will this work with the JVC GY-HM600U?

A: Yes, this will work with the JVC GY-HM600U using the 2.5 mm remote port.

Q: 10. Will this allow for start/stop trigger via CN18-80mm and Canon C100 II?

A: The VariZoom VZPGC Deluxe Zoom Controller is designed specifically for the Canon CN-E 18-80mm & 70-200mm Lenses and Cano's professional camcorders so, yes, the red button can be used for start/stop record.