Da-Lite 24868 Tensioned Electrol Ceiling-Recessed Screen

Da-lite 24868 Tensioned Electrol Ceiling-recessed Screen

Product Code: eq176022
Availability: In Stock

$54,234.00 $65,623.14

Qty

15 reviews Write a review

Description
Reviews (15)

The white Da-Lite 24868 Tensioned Electrol Ceiling-Recessed Screenfrom Da-Lite 24868 Tensioned Electrol Ceiling-Recessed Screenis designed to be concealed neatly in a ceiling when not in use, which makes it ideal for large corporate conference rooms. The screen can be installed in two stages; the screen case can be installed during construction, and the screen assembly can be attached during the finishing stage. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets allow you to attach the screen housing to the structure above the drop ceiling. Closure doors keep the screen out of sight when it isn't being used.

The HD Progressive 1.3 surface has a gain of 1.3, 150° viewing angle, and is ideal for applications where projector brightness and screen size require an increase in gain. The pure white HD Progressive surface offers true color reproduction, and allows for more flexibility with ambient light conditions. This seamless surface also allows for easy viewing of detail in video as well as charts and graphs in a corporate setting. HD Progressive 1.3 can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. This surface has also achieved GREENGUARD GOLD Certification. Each side of the material uses a tab guide cable system to maintain even lateral tension and hold the surface flat. This helps to ensure that pixels from the display image don't overlap with one another. Tensioning also helps to prevent creases or folding of your screen. A custom slat bar with added weight maintains vertical tension on the screen surface.

For controlling the screen, a three-position Decora-style wall plate is included, along with a cover switch. Low Voltage Control allows the screen to be controlled via a low voltage signal or momentary dry contact from a third-party control system. The LVC is necessary if you are using an IR or RF remote to control your screen.

208" Diagonal 16:10 Aspect Ratio HD Progressive 1.3 Surface 1.3 Gain / 150° Viewing Angle Black Backing on Surface Tensioned for Flat Image Display 120 VAC, 60 Hz Motor Three-Button Decora-Style Wall Switch Includes LVC for Remote Control

Key Specs
Front/Rear Projection	Front
Aspect Ratio	16:10
Diagonal	208.0" / 528.3 cm
Gain	1.3
Tensioned	Yes
Type
Series	Tensioned Large Advantage Deluxe Electrol
Front/Rear Projection	Front
Aspect Ratio	16:10
Style	Ceiling-Recessed
Dimensions
Viewing Area	110.0 x 176.0" / 279.4 x 447.0 cm
Diagonal	208.0" / 528.3 cm
Extra Top Drop	12" / 30.5 cm
Surface
Gain	1.3
Viewing Angle	150 degrees
Masking	All Four Sides
Tensioned	Yes
Black Backing	Yes
Casing
Length	205.0" / 520.7 cm
General
Voltage	120 VAC/60 Hz
Packaging Info
Package Weight	653 lb
Box Dimensions (LxWxH)	214 x 23 x 18"

The screen has two motors, both mounted inside the case. One motor operates the door at the bottom of the case, and the other operates the screen's movement.

The electrical junction box is internally integrated into the housing, making it possible to install the housing, and then wire to the building's electrical system during construction.

Smooth Roll Technology to keep your screen flat.

Slim-Tab, a lower profile, and strong tab design to keep your screen taut.

White powder-coated case with white endcaps and closure doors for a clean aesthetic.

The case is UL Plenum rated.

Related Questions and Answers

Q: 1. Can power output be controlled from the iPhone app?

A: Yes, but you need the portable wireless transmitter EL-Skyport WiFi, then select the it on your iPhone's wifi settings

Q: 2. Can I use with Amaran COB 60d?

A: The Aputure Light Storm LS 60x Bi-Color LED Light BH #APLS60X does not have an umbrella port so it cannot be used with an apollo softbox which mounts via an umbrella shaft.

Q: 3. Will this softbox work with an optical trigger? Since the flash is enclosed I was not sure if it would prevent the transmission of the signal from camera to flash.

A: Honest answer is: I don't know. I use the 10m(33ft) cord that Syl Arena recommends. It allows you to control the OCF from the camera's menus. Don't use a curly one, you will pull the light stand over!

Q: 4. I love using this lighting set. Question: When I use three elinchrom flashheads, they sound not together really quickly. Is there anything I need to check? Is there a manual download for the trigger plus? I found a two page manual on the elinchrom website.

A: What sound? Fan, beep? If they are at different power levels they may sound different.

Q: 5. Does this accept Bowens mount soft boxes?

A: Not directly, no. The Elinchrom D-Lite RX One Flash Head uses the Elinchrom mount, not the Bowens S-mount, for connecting light modifiers to this light fixture. As such, in order to use a Bowens S-mount light modifier on the Elinchrom D-Lite RX One Flash Head, it is recommended to purchase the GTX STUDIO Bowens to Elinchrom Flash Head Adapter, B&H # GTGSAR1424 • MFR # GS-AR-1424. https://bhpho.to/3Gc7hWG

Q: 6. Is the honeycomb grid and hood diffuser included in this set? If not, do you have anything that will work with this set?

A: A softbox is included for each head in this kit. However, there are no grids available to fit them. For grids to fit the lamp heads using a reflector, you may consider the Elinchrom Reflector and Honeycomb Grid Set, B&H # ELCGS8.25 . https://bhpho.to/36ARezX

Q: 7. Is this motor compatible with the SmallRig Wireless Follow Focus Controller Kit? BH #SM3917 • MFR #3917

A: According to the manufacturer, the SmallRig Wireless Follow Focus Controller Kit (B&H # SM3917) is compatible with the focus motor on the SmallRig Wireless Follow Focus Lite Kit.

Q: 8. Will this strobe work the following: Impact Luxbanx Duo Small Strip Softbox (12 x 36 )?

A: Hi,Your best bet is to ask the team that sells Impact. They most likely sell a ring for their soft boxes that works with Elinchrom.Regards,Will H

Q: 9. Can the EL-Skyport Transmitter Plus be used with a Canon 430EX II Speedlite as a slave?

A: You can but you need the EL-Skyport receiver. https://a href= http://www.bhphotovideo.com/c/product/1247560-REG/elinchrom_el19369_el_skyport_receiver_plus.html target= _blank www.bhphotovideo.com/c/product/1247560-REG/elinchrom_el19369_el_skyport_receiver_plus.html/aNot 100% sure the setup makes sense though as the Elinchrom flashes are MUCH more powerful...

Q: 10. does this work with the Vello Captain Freewave?

A: The internal receiver does not work with the Vello FreeWave Captain. If you use a receiver on the light then you will be able to use the Vello FreeWave Captain.

Gab Laughin	28/09/2024
[16:10] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projection screen/case up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem! 5

Peter	28/09/2024
[Yes] After correspondence with B&H on product lines and availability , I selected the cinema contour to marry up with the projector specifications that were needed. It also worked well with the acoustic demands of the in wall speakers hidden behind it . The result was spot on. Excellent price coupled with exceptional performance. B&H got the job done. Pro service for pro contractors. 5

Yvenson	14/09/2024
[150 degrees] I love this product, Easy to install and and look even better on the wall. 5

anyonymous	09/09/2024
[Yes] The screen was simple to mount (we used lag bolts and attached the screen to a wall.) The screen did not come with instructions on how to install the switch for a 120v motor...complicated the electrical install was inconsistent wire colors on the switch and the screen. After consulting an electrician and enduring his derision for working with this product - he correctly intuited the correct wiring configuration. A big thanks to the customer service at B&H. We ordered the screen 2 weeks from a graduation. The shipper lost the screen for nearly a week, without informing us. I contacted the shipper, who responded with a long distance shoulder shrug - explaining they would look for it again. Unable to motivate the shipper, I called B&H - they got involved, and the screen was in my driveway 36 hours later. Thanks B&H. 5

Chip	12/08/2024
[214 x 23 x 18"] We use the screen in our church sanctuary once or twice a month. Installing it was an adventure with the weight and length, but several sections of scaffolding and a couple friends made the install move along nicely. The instructions for wiring were right on and it worked first try! The image is right on and visible the entire length of our viewing area (over 100'). 5

Zack	09/08/2024
[Yes] I installed in my living room in between ceiling joists. It works great. I use it with a Panasonic HD projector. It impresses everyone who walks in the room. Has a clean appearance when retracted. Note: it didn't come with a 12v trigger as both the B&H customer service rep and myself thought it did. We both misunderstood the description (it's optional.) The part was available at Da-Lite for $80 and came with no instructions. I got it to work after a few emails and chats with da-lite. Also, I ended up placing some holes in the top of the case to mount using 8 Lag bolts into the 2nd story floor structure. All the hardware that comes with it assumes you will have access to hang it from the top which requires access via the side while it's in it's final position. I was putting it in a hole the size of the case in my finished ceiling so that method would not work ( I would have had to remove and re-install a lot of drywall). I knew this before I purchased by reading the installation instructions so no worries just a fact and maybe a consideration for future changes to the case or just the directions. 5

petarm	01/08/2024
[Yes] We use the electrol screens almost exclusively in close to a 100 locations. They are versatile and durable. 5

Rikilah	27/07/2024
[Yes] This Screen was easy to install. It took 3 people and 2 ladders to get the job done. The remote is really not needed but i opted to install it as well. The motor runs really smooth. The screen is nice and wide. A really good buy. 5