The Aiphone JF-2HD Sub Monitor Stationfrom Aiphone JF-2HD Sub Monitor Stationis designed to be used with the JF series video entry security system. It supports two video door stations and three inside color monitor stations (one master monitor and two sub monitors). The JF-2HD has a built-in picture memory feature that can be set to record automatically when a visitor calls, or activated manually by the user. Up to 10 images (80 frames) can be saved and protected from automatic overwriting.

Up to two outgoing messages can be pre-recorded at the JF-2MED master station (available separately) to be sent to the door station for playback. This monitoring station features two-conductor wiring to make installation easy and can be mounted to a single gang-box or ring.

Sub Monitor for JF Series Entry System    Automatically Records When Visitor Calls    Built-In 3.5" Color LCD Display    Built-In Microphone and Talk Button    Internal Voice Memo/Outgoing Message    Outgoing Message Support with JF-2MED    Call/Play/Record/Menu Buttons    Up to 2 Doors/3 Monitors Supported    Two-Conductor Wiring    18 VDC Powered

Hands-free audio communication

Door release to the door where communication is established via RY-3DL (available separately)

Up to 50 images can be recorded at a rate of 1 fps and 8 frames per image (total 400 frames)

Internal picture memory

Internal voice memo and outgoing message can be recorded for playback

Simple two-conductor wiring

Surface mounts to wall on a single gang-box or ring

ABS plastic construction

Related Questions and Answers

Q: 1. If I were to use this in line with the MX41 as an input to increase inputs to the monitor, would the signal from the mx41b come through ?

A: To begin with, I'm confused with your question, as you refer to an MX41, and an mx41b. Presuming that you mean the Rolls MX41B in both instances, then I am further confused by your question about whether the signal from it would come through. The more clearly you state your question, the better the rest of us can understand and offer help.That being said, there should be no problem to take the output from the MX41B into either the line input or instrument input of the Rolls PM351 and hear all the inputs from both units mixed together on the output of the PM351. It has lots of range and volume available, and is a great, clean headphone amp/mixer/direct box. You will want to pay attention to your stereo and mono cables, as well as the stereo/mono jumpers on the PM351, so you know what you are actually listening to. The MX41B is stereo, so I don't know what happens when you put a mono cable into it... it may only appear on one side of the output. Stereo/mono on the PM351 is selectable with two jumpers. Careful with those jumpers, though, they are black and small and easily lost.The quarter-inches are all unbalanced, too, so don't run those cables more than about 10 feet if you can help it. The XLR's are fine for any length, of course.Hope that helps.rcarbaugh

Q: 2. Does this printer comes with paper already loaded or you will have to buy printing paper separate?

A: You will have to purchase and load the paper yourself. The process is pretty easy though

Q: 3. Could I run a stereo signal into this box & send that same stereo out, but allow headphone monitoring of the signal?

A: Yes, this box has a 1/4-inch input that can be switched to stereo, and has a left and right XLR line level outputs, as well as a headphone jack.

Q: 4. Will this work with Canon EOS R?

A: yes, it has the right cable for the EOS R

Q: 5. How long will the battery last in use?

A: The Miops Camera Trigger with Cable for Canon Sub-Mini Cameras Kit can work up to 96 hours of usage on a single charge.

Q: 6. Is this the right cable for the Canon R7?

A: Yes, the Miops Camera Trigger with Cable for Canon Sub-Mini Cameras Kit (B&H # MIOPSC2K • MFR # MIOPS-C2) is the right cable for the Canon R7.

Q: 7. Can I print on Mylar bags with this equipment

A: Hello Nardo, Printing on any substance other than the media designated for the P910 would not be recommended and would void any service and warranty. In the printing process for dye-sublimation there is a large amount of heat generated which could melt any material not designed for the process. L Ahlman

Q: 8. Do you need the mobile dongle to use the smartphone app? I am not sure why the mobile dongle would be necessary?

A: You may also extend the range of your triggering system by taking the MIOPS remote off camera with the included Mobile Dongle for iOS and Android. By connecting your smartphone directly to your camera, you can now take the MIOPS remote a distance away and then wirelessly trigger the camera through the phone. The remote will send a signal over Bluetooth to tell the phone to set off the camera and/or flash unit.

Q: 9. Does this printer comes with paper already loaded or you will have to buy printing paper separate?

A: The paper and color roll are sold seperately in a single kit. Due to the nature of dye-sub printers, a roll of color and paper will yield exactly the listed number of prints.

Q: 10. Is this trigger kit compatible with the Canon EOS 60D?

A: Yes, this trigger kit is compatible with the Canon 60D.