Gra-Vue Remote Control Panel For Vio Delay-X/Xl (1Ru)

Gra-vue Remote Control Panel For Vio Delay-x/xl (1ru)

Product Code: eq176033
Availability: In Stock

$6,965.85 $9,264.58

Qty

13 reviews Write a review

Description
Reviews (13)

The 1RU Gra-Vue Remote Control Panel for VIO Delay-X/XL (1RU)from Gra-Vue Remote Control Panel for VIO Delay-X/XL (1RU)is a remote control unit which can control up to two Delay-X or Delay-XL units simultaneously, enabling synchronized operation of a master delay line and a slave delay line. This remote control panel features two 2.2" full-color LCD displays, dual power input, and voice & light alarms. The LCD on the left is used to display parameter settings and works with the wheel, whereas the one on the right is used when the Delay-X host is configured with the MVS option to display all channels of the five-channel multiviewer in real time: the control panel is equipped with five keys, each of which features a mini LED screen which can display one of the five output channels.

Parameters
Connectors	2 x DB-26, RS-485 protocol 2 x Power in 1 x RJ-45, Ethernet 1 x Aux-in
Display	2 x 2.2" 376 x 240 LCD full color displays
Controls	5 x Button with mini LED screen 1 x Wheel controller
Power Consumption	5 W
Dimensions	17.3 x 4.5 x 1.7" (44.0 x 15.0 x 4.4 cm)
Weight	3.3 lb (1.5 kg)

Remotely controls two Delay-X or Delay-XL units

Dual power supply

Five keys with mini LED screens display the host's five output channels

Linkage control mode for controlling two units

Dynamic display menu control

HD video display switch button, displays five video signals in real time

Voice and light alarm

Ethernet interface for upgrading software

Related Questions and Answers

Q: 1. Can this be connected to a VISLINK RF camera system that is using a SONY PXW-Z750?

A: The Sony RCP-1530 Slim Remote Control Panel (Joystick) would not be compatible with a VISLINK RF system. The Control would need to be connect to a compatible CCU to control the Sony PXW-Z750.

Q: 2. Can this control panel control URSA Broadcast cameras without an ATEM switcher?

A: No. All camera control electronics hardware is inside ATEM switchers. This panel is a control surface that needs to connect to an ATEM for camera control.

Q: 3. I did not see EOS 10D, is this remote compatible?Do you have other Canon remote recommendations if not?

A: No, it is not compatible since the camera does not have an IR sensor built in. It uses a 3-pin connector like this Vello shutter release: https://bhpho.to/2dPByMI

Q: 4. Using BM Ursa Broadcast cameras will this unit work with the Tricaster TC 1 switcher?

A: The Blackmagic Design ATEM Camera Control Panel is designed to be used with Black Magic Atem switcher models. It would not be compatible with the NewTek Tricaster.

Q: 5. Hi. I want to know how many cameras can control this unit simultaneously?

A: Hi jose r, Each RCP-1530 can only control one camera at a time.Please see the operation manual pages 5 & 6 for configuration options:https://pro.sony/s3/cms-static-content/uploadfile/78/1237493650778.pdfRegards,Ralph

Q: 6. Will this work with a PXW-X320?

A: Yes, this will work with the PXW-X320.

Q: 7. Does it work with the M50?

A: No, the Canon RC-6 Wireless Remote Control is not compatible for use with the Canon EOS M50 Mirrorless Digital Camera. The Canon EOS M50 Mirrorless Digital Camera does not have an infrared sensor on the front of the camera to communicate with the RC-6 infrared remote. As such, you would either have to use the Canon BR-E1 Wireless Remote Control, B&H # CABRE1, or you may use an Android or an Apple iOS smartphone/tablet with the Canon Camera Connect app installed to wirelessly trigger your camera.

Q: 8. What does the workflow need to look like to actually control camera? Does it control the camera over SDI?

A: The ATEM switcher has the electronics to control the cameras through SDI feed back to each camera. This Camera Control Panel connects to the ATEM switcher via Gigabit Ethernet.

Q: 9. So I still need this console if I have the new THE new HD8 iso switcher?

A: The Blackmagic Design ATEM Camera Control Panel is an addition you could add if you want a separate person shading your cameras. The ATEM HD8 has all of the camera controls built in.

Q: 10. Hi! How can I use this without a delay? (Mark IV) Thanks!

A: Set your camera to remote function but not 2 second delay. Page 280 of the online pdf manual. Set the timer mode so that you only see the remote symbol with the clock but no number.

Mark	25/09/2024
[3.3 lb (1.5 kg)] Allows control of the OBSBOT video when hand gestures and voice get in the way. 5

Jaron	19/09/2024
[3.3 lb (1.5 kg)] THE fastest way to shade multicam and it's expandable. I cannot personally stand the joystick-style RCP's, far too coarse and I've seen too many mistakes when the cam counts + + +. This is a lot cleaner and better - and it's universal in terms of camera brand. I can shade multiple brands, PTZ's, etc all on the same controls. Also - they are about to release new functionality to plug a Tangent Ripple into this panel DIRECTLY for 2-dimensional control of L/G/G alongside the iris sliders. Nothing exists like this panel, it's a live-show game changer. 5

Dave	03/09/2024
[5 W] Ok, I just feel bad this thing only had a single 3-star review that was otherwise positive. Of course you need desk space if you're shading multiple cameras. This controller is solidly built and well thought out. The cost is way below what traditional CCUs would run you, not to mention the footprint, and the fact that you get so much control through Ethernet and either SDI or fiber is one of the things I love about the BlackMagic live ecosystem. Highly recommended. 5

Bob Lavigne	18/08/2024
[3.3 lb (1.5 kg)] The sound is very clear. No coloring. This is by far the best delay I've had and the others I've owned don't macth on any point... (Ibanez AD-9, Boss DD-7) It's a bit expensive but worth it. It's simple to use, very nice and offers a lot for the money. The sound is absolutely incredible. The USB port offers the capability of upgrading the presets and firmware. This pedal evolves so it doesn't get outdated. Eventide have a nive web support and pdf files and programs. You can organize the presets with a free application on their site. So many features - impossible to list. 5

Staxman	01/07/2024
[3.3 lb (1.5 kg)] After searching for weeks for the right delay I finally settled on the timefactor and could not be happier. I use it 2 ways, as the last effect on my pedalboard with stereo INS and stereo outs feeding two amps and from the send to the return of each of two amps. The timefactor works great in both uses. The ability to choose the mix of both dry and delay is great. The ability to use two seperate delay lines is like having two delay lines in one. I also like the three options for bypass type allowing you to use the peal as a buffer in your chain or going full true bypass. For the money this is one of the most versatile units available, and with the quality of eventide behind it, you cannot go wrong. 5

Mark	12/06/2024
[3.3 lb (1.5 kg)] Makes using my gimbal so much easier 5

Kelly-prompter	28/05/2024
[3.3 lb (1.5 kg)] I have a teleprompting company. We work on such shows as The CMA MUSIC Awards and CMA Music Fest in Nashville. When no one else around had the gear I needed to create a routing system for 6 different prompter monitors, B&H had exactly what I needed. I got it quickly too. When I'm under the gun to get gear quick, there's no better place to go than B&H. 5

Tim	21/05/2024
[5 W] This unit is truly a great value and is a must for professional broadcasters. Previously, this wasthe cost for basically one CCU. The fact you can control 4 (more with the shift function) is truly amazing. The only complaint I have is the coloring is more limited than the broadcast professional units. 5

Tony	15/05/2024
[5 W] This is a great little remote, and makes it easier to tweak the camera on the fly, especially if it suddenly loses its tracking, which can (and will) happen. I highly recommend getting it! 5