The Gra-Vue MVIO VSD-HD HD/SD-SDI/ASI Video Distribution Amplifierfrom Gra-Vue MVIO VSD-HD HD/SD-SDI/ASI Video Distribution Amplifieris a digital video distribution amplifier. The unit provides HD/SD/ASI signals with reclocking over a maximum distance of 328' using a Belden 1694A cable. It supports HD-SDI signals (SMPTE-292M) and SD-SDI signals (SMPTE 259M) as well as compressed/uncompressed SDI video signals. It features one BNC HD/SD/ASI signal input and seven BNC outputs. The unit's BNC output 1 is a bypass signal output. The unit's internal LED indicates signal status.

1RU half-rack rackmount

One HD/SD video signal input to seven HD/SD video signal outputs

Support SD: 270 Mb/s

Support HD: 1.485, 1.485/1.001 Gb/s

MVIO VSD-HD has one loop through

Compatible with DVB-ASI signal

Provides LED lights to indicate signal status

Related Questions and Answers

Q: 1. What's in the box?

A: The following is included with this kit: 600MP Transmitter 600MP Receiver 2 x 2-Pin LEMO to D-Tap Cables Articulating Arm 2 x Extended Range Antennas 2 x SDI Cables Waterproof Case Limited 3-Year Warranty

Q: 2. Which end connects to the camera, the transmitter or receiver?

A: With systems like this you Transmit the signal from the camera to a monitor that has a receiver on it. The Transmitter will go with the camera.

Q: 3. Can this mount to the Movi Pro pop and lock system?

A: That is possible. The FREEFLY Pop-N-Lock Quick Release System, B&H # FR91000205, has both 1/4"-20 and 3/8" threads to attach accessories. You would just need to use something like a 1/4"-20 to 1/4"20 Spigot or articulating arm to connect this to the Pop-N-Lock. 1/4"-20 Spigot - https://bhpho.to/2jdVltE E-Image Mini Arm with 1/4"-20 Studs - https://bhpho.to/2WODQn7

Q: 4. How noisy is the transmitter?

A: The noise produced by the CINEGEARS Ghost-Eye 600MP Wireless Transmitter is very low, if barely audible on a microphone.

Q: 5. Which receiver should I use with this transmitter?

A: The Ghost-Eye 600MP Transmitter works with the Ghost-Eye 600MP Receiver. At the time of this posting we do not sell just the receiver. However we do have this same Transmitter in a Kit with a receiver, B&H # CI6635. You may want to consider purchasing this kit for both a Transmitter and Receiver. https://bhpho.to/2BGCwu2

Q: 6. Can the receiver output HDMI and SDI at the same time to enable a loop to another monitor?

A: Yes you can. If using a smallhd monitor you can just run one sdi out to that, and loop out of the smallhd as well.

Q: 7. Does this transmit audio over both the SDI and HDMI? My unit does not seem to have audio and I can't find a setting for it.

A: It should transmit audio. Check the output of your camera

Q: 8. how to upgrade its firmwere? actually we are facing white flashes at its quad output.plz help us in this regard.

A: Please contact SWIT directly for technical support: SWIT: Tel: (866) 986-7948 or (408) 260-8258 Email info@swit.us

Q: 9. Can you use two or three of these in one location or will the signals interfere with each other?

A: You can put each set on a different channel, so it should work just fine

Q: 10. it says you can power the transmitter via dtap butcan you power the reciever with a d tap?

A: Yes, both tx and rx can be powered via p tap to 2 pin lemo cables.