The Whirlwind Accusonic+2 XLR Male to Female Microphone Cable 2'is built with Accusonic+2 cable and fitted with Whirlwind XLR connectors for consistent peformance under the harshest conditions.

Highly Flexible    Resistant to Handling Microphonics    Braided Shield for Noise Rejection

Accusonic+2 cables feature finely stranded center conductors and a braided shield for superior noise rejection

MK cables are extremely flexible and reliable under the roughest conditions

Related Questions and Answers

Q: 1. Hello. I have the f3 zoom. Is this adapter necessary with phanton power??? because the f3 has the option to give phantom power. I don't understand very well what it would be used for

A: The RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter would be used when you have a lavalier microphone with a 3.5mm connector, and you want to connect it to an XLR input. Lavalier microphones require a certain type of power, which is different from the 48v phantom power provided by XLR audio recorders. This adapter can convert that 48v phantom power to the special plugin power the lavalier needs. Compatibility will depend on the specific model of your lavalier.

Q: 2. will it work with takstar sgc-598?

A: That adapter will work for the Takstar SGC-598 microphone, to connect to an XLR input. Since that Takstar mic is battery powered, the less costly ROVXLR adapter would also work: https://bhpho.to/3AOKIE9

Q: 3. is this needed for zoom h6 and rode wireless go?

A: No. The adapter you want is the Rode VXLR (B&H # ROVXLR) since you only need to convert the 3.5mm plug to XLR. The VXLR+ is used when you are using a condenser style microphone like a lavalier mic with a 3.5mm connector and need to connect it to an XLR mic input on a recorder or mixer. For instance, if you have a separate lavalier mic that you use with the Wireless GO transmitter, such as the Rode Lavalier GO, it is a condenser mic that requires plug-in power, which is a low voltage. A recorder or mixer's XLR input can supply phantom power, which is typically 48V and way too much power for a lavalier mic. The VXLR+ converts the 48V to a much lower voltage and allows you to use a mic like the Lavalier GO which requires 2.7V and connect it directly to an XLR input on the H6.

Q: 4. Can this be used as an adapter for PA's or DJ's desks into a XLR input on a recorder?

A: The Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter is typically used to adapt microphones with 3.5mm wiring to XLR inputs, however this adapter could presumably work in the same manner with a line level 3.5mm connection from a DJ deck into a line level XLR input on a recorder.

Q: 5. Sanken COS-11D Omni Lavalier Mic With a Sennheiser 3.5 EW connector work properly with this adapter please?

A: My previous answer may be inaccurate. Some COS-11D microphones are 48V Phantom and some are +3V to +10V. You will need to determine the power requirements of your microphone. The VXLR Plus provides 5 Volts.

Q: 6. Does this work with the Deity D3 pro microphone ?

A: No. Because the D3 is self powered you can use the regular VXLR https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html

Q: 7. Can this convert unbalanced TRS to balanced XLR?

A: This adapter will not balance the microphone signal. You can use it to connect stereo 3.5mm wired microphones to XLR inputs. This version does have a transformer balanced output: https://bhpho.to/2WQbqxK

Q: 8. Will this work with the Deity W lav Pro (that is, instead of the similar Deity adapter)? Thanks!

A: This adapter should work with the mini jack connection provided in the W lav kit.

Q: 9. Is this compatible with balanced or unbalanced XLR?

A: The VXLR+ is designed to convert high voltage phantom power used with pro balanced XLR mic inputs into much lower bias voltage (plug-in power) that is needed by many unbalanced electret condenser mics like lavalier mics and shotgun style camera mics.

Q: 10. Can someone describe what is connected to each 1/8 in. connection (tip. ring, sleeve) in terms of signal, power, and ground? (This would help to answer a lot of other questions.)

A: The specific TRS input wiring schematic is not available for the Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter, however we can confirm that the VXLR+ is compatible with microphones using the 3.5mm "Sennheiser" wiring configuration for compatibility. This adapter is not compatible with microphones wired for compatibility with Sony input connections.