The E-Image Heavy Duty Fluid Video Headsupports cameras and accessories up to 55 pounds, while incorporating a 100mm half ball for quick leveling adjustments. The head features 15 steps of counterbalance, allowing you to adjust the head for operation with lighter cameras. Pan and Tilt drag are individually adjustable and feature levels of 1 to 7, as well as a 0 setting for no drag.

The camera platform accepts a sliding balance plate so you can balance the camera on the head and features a lock and safety release. The head is equipped with two panhandle rosettes, one on each side. It comes with one panhandle and a plastic rosette insert which can protect the metal rosettes from accidental damage avoiding costly rosette replacement. The head is also equipped with a 1/4"-20 threaded accessory socket for attaching accessories such as support arms to the head. An illuminated bubble level is built into the head so that you can check that your shot is level.

Payload: 55 Pounds    100mm Half Ball    Stepped Counterbalance    0 to 7 Grades of Tilt & Pan Drag    Sliding Balance Plate    L/R Pan Handle Rosettes    1/4"-20 Accessory Socket    Illuminated Bubble Level

Seven steps of pan and tilt drag, plus a zero setting, allows you to adjust the head to match the needs of the shot and your operating style. The zero setting removes the drag entirely, allowing the head to move freely.

Fifteen steps of counterbalance allows you to fine-tune the head to match the weight of your camera.

100mm half ball tripod fitting provides a wide support platform, making it suitable for use with cameras up to fifty-five pounds. The ball leveling system allows you to level the head independently of the tripod that you choose to mount the head to.

Related Questions and Answers

Q: 1. Would two of these be able to support a camera slider like a magic carpet pro? More-so the legs not the head?

A: Yes, you will be able to use the Syrp Magic Carpet PRO sliders with the Viltrox VX-18M Tripod.

Q: 2. Can you use this tripod with an universal dolly such as the magnus dwf-2?

A: Yes you will be able to use the Viltrox Video Tripod with a universal dolly, such as the Magnus DWF-2.

Q: 3. The knob on the bottom to release the head is very difficult to grab and apply sufficient torque. It oftens loosens while tilting. Can i replace the knob with the paddle style knob from a Sachtler FSB8t video head? Are these threadings universal? Thanks.

A: Hello,Unfortunately, these threads aren't universal, but they are a standard M8 thread. I can't say for certain if the Sachtler locking knob will work, but if it uses an M8 thread there is a good chance it will. Also, make sure your load doesn't exceed the 11 lb. recommended limit for the GH03, and that the center of balance for the load is over the center of the head. No matter how tightly you lock it down, an overburdened or unbalanced head will shift in the bowl much easier than one that isn't.

Q: 4. Is this head versatile for beginner?

A: Absolutely. I purchased this head to attach to my slider and it's been great. It's smooth, well built and fairly lightweight. I also have an E-Image EG03A2 tripod with the same head which makes switching from the slider to tripod a breeze. The head is very well suited for those interested in getting started in videography/indie-film making, but has enough features to provide room to grow. Are there better heads out there? Without a doubt. Are there better heads out there at this price point? I don't know of many. I hope this helps you with your decision.

Q: 5. What is the counterbalance weight for this Tripod head since its fixed?

A: The GH03 head counter-balance weight is 5KG.

Q: 6. Is the GH06 compatible with the Sachtler Flowtech legs w/75mm bowl?

A: Yes, you should be able to use the E-Image GH06 Fluid Head with the Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet.

Q: 7. I need replacement quick release plate for this model. Where can I find it? Thanks

A: The Manfrotto 501PL Sliding Quick Release Plate with 1/4"-20 Screw, B&H # MA501PL, would be a compatible quick release plate for the Viltrox VX-18M Heavy-Duty Video Tripod with VT-01 Fluid Head.

Q: 8. Do all three legs have to be adjusted to the same height or can 1-2 legs be set to a different height?

A: The legs do not have to be adjusted to the same height.

Q: 9. is there any design difference between the flat and ball version of this head? (other than the ball of course)

A: It is the same from the base up.

Q: 10. According to specs, this fluid head should be operational at -40 degrees. Is this true? Has anyone tried it in very cold temperatures?

A: The manufacturer's specs are based on workbench tests that are rigidly adhered to and while we do not have first-hand access to those temperature conditions, we have heard of instances where this fluid head did operate successfully at very low, mid-winter New York temperatures.