The E-Image Heavy-Duty Fluid Video Headfrom E-Image Heavy-Duty Fluid Video Headsupports cameras and accessories up to 39.6 lb, while incorporating a 100mm half ball for quick leveling adjustments. The head features 10 steps of counterbalance, allowing you to adjust the head for operation with lighter cameras. Pan and Tilt drag are individually adjustable and feature levels of 1 to 5, as well as a 0 setting for no drag.

The camera platform accepts a sliding balance plate so you can balance the camera on the head and features a lock and safety release. The head is equipped with two panhandle rosettes, one on each side. It comes with one panhandle, and the head is also equipped with a 1/4"-20 threaded accessory socket for attaching accessories such as support arms. An illuminated bubble level is built into the head so that you can check that your shot is level.

Supports 39.6 lb    100mm Half Ball    Stepped Counterbalance 0 to 9    0 to 5 Grades of Tilt & Pan Drag    Sliding Balance Plate    L/R Pan Handle Rosettes    1/4"-20 Accessory Socket    Illuminated Bubble Level

Five grades of pan and tilt drag, plus a zero setting, allows you to adjust the head to match the needs of the shot and your operating style. The zero setting removes the drag entirely, allowing the head to move freely.

Ten steps of counterbalance, 0 through 9, allows you to fine-tune the head to match the weight of your camera.

The 100mm half ball tripod fitting provides a wide support platform, making it suitable for use with cameras up to 39.6 lb. The ball leveling system allows you to level the head independently of the tripod that you choose to mount the head to.

It includes a removable panhandle that you can attach to either side of the head. A plastic insert rides between the rosettes on the panhandle and the head, protecting the metal rosettes from contact damage. The rosettes on the head are removable, so if they become damaged they can be replaced.

The illuminated bubble level is activated by pressing a small red button on the head, so you can level the head in dim lighting conditions.

Related Questions and Answers

Q: 1. Is the GH06 compatible with the Sachtler Flowtech legs w/75mm bowl?

A: Yes, you should be able to use the E-Image GH06 Fluid Head with the Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet.

Q: 2. According to specs, this fluid head should be operational at -40 degrees. Is this true? Has anyone tried it in very cold temperatures?

A: The manufacturer's specs are based on workbench tests that are rigidly adhered to and while we do not have first-hand access to those temperature conditions, we have heard of instances where this fluid head did operate successfully at very low, mid-winter New York temperatures.

Q: 3. Does this work with DSLR?

A: Yes, the following tripod will work with both high end video/ slr cameras. will support a payload of 13 lbs

Q: 4. Is the head removable/able to swap?

A: Yes it is removable but the base of the tripod is an uncommon size (60mm). Most video heads are 75mm or 100mm. If you would like to swap the head you would need to find another 60mm video head.

Q: 5. I need replacement quick release plate for this model. Where can I find it? Thanks

A: The Manfrotto 501PL Sliding Quick Release Plate with 1/4"-20 Screw, B&H # MA501PL, would be a compatible quick release plate for the Viltrox VX-18M Heavy-Duty Video Tripod with VT-01 Fluid Head.

Q: 6. Does E IMAGE GH 6 has some starting lag or something

A: For the E-Image GH06 Fluid Head, drag control can be adjusted with the 3-step, plus 0 settings for either pan and/or tilt. these will effectively adjust the amount of resistance toward panning and tilting. As E-Image suggests, the 0 setting, will have virtually no resistance.

Q: 7. Does this head work with Peak Design Dual Plate V2?

A: no it does NOT

Q: 8. Can the feet come off?

A: Yes. The feet can come off this tripod system. The Viltrox VX-18M Heavy-Duty Video Tripod with VT-01 Fluid Head BH #VIVX18M • MFR #VX-18M

Q: 9. I lost the screw that secures the quick release plate into the mount. Where can I find a replacement part?

A: You can use Manfrotto's screws, part number MAR116.138 if you need 1/4'' screws, or MAR116.137 if you need 3/8''.

Q: 10. Can you use this tripod with an universal dolly such as the magnus dwf-2?

A: Yes you will be able to use the Viltrox Video Tripod with a universal dolly, such as the Magnus DWF-2.