The E-Image EG10A2 Aluminum Tripod with GH10 Headsupports cameras and accessories weighing up to 22 pounds. The head and legs feature a 75mm ball/bowl, which provides a wide support platform. The legs are made from aluminum to be durable and lightweight, and they feature three leg sections with mono-lock leg locks. The mono-lock design allows you to lock and unlock all the sections of each leg using only one rotating locking lever. The tripod legs are height-adjustable from 32.5 to 68". The legs include a mid-level spreader and rubber feet that attach to the spiked feet.

The GH10 head features a sliding balance plate system for attaching the camera to the head. It provides seven counter balance settings (one to seven) that help the fluid head support loads up to 22 pounds. With three fluid drag grades plus a zero setting on both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot. The head features a built in 1/4"-20 accessory socket for available monitor support arms or other accessory items. It includes a padded carry bag with shoulder strap

Supports up to 22 Pounds    75mm Ball/Bowl    3-Section Legs with Mono-Lock Design    Height Range 32.5 to 68"    7-Step Counter Balance    3 Steps Plus 0 Fluid Pan & Tilt Drag    1/4"-20 Threaded Accessory Socket    Mid-Level Spreader    Padded Bag with Shoulder Strap

Mono-lock design allows you to lock and unlock the three sections of each leg using only one locking lever. The rotating lever provides a robust clamp mechanism that secures the legs and prevents them from slipping once locked. The single lever on each leg allows you to quickly lock the leg height without having to use two levers, making for a quicker workflow and sparing you from having to bend down to open a bottom leg lock to raise the legs.

The legs feature spiked feet that provide solid purchase on soft surfaces. The included mid-level spreader allows you to use the legs on uneven surfaces, and the rubber feet allow you to shoot on hard/delicate surfaces.

The head incorporates a push button that illuminates the built-in bubble level. An LR41 push-button battery is included and is easily replaceable.

Related Questions and Answers

Q: 1. Are the legs specs info about max and minimum height right in cm?

A: Hi, the measurement specifications are correct in inches, and the correct measurements in CM are: Minimum Height With Head: 32.5" (82.55 cm), Maximum Height With Head: 72.5" (184.15 cm) Folded Length With Head: 35.5" (90.17 cm).

Q: 2. does this item come with a pan handle or do you have to purchase it separately?

A: it comes with the pan handle

Q: 3. What weight is it? With bag.

A: the estimated weight with the bag is approximately 13lbs

Q: 4. I have purchased this product and only used it 4 times. It is almost an outstanding product except for couple issues which makes it useless for video. In your advertisement it says With variable fluid drag on both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot. Untrue there is only variable fluid drag adjustment on tilt and not on pan. To make matters worse upon purchasing the tripod in February the fluid drag was notably less than tilt even when tilt is set at the lowest setting. I have not used the tripod in months and I just used it again in the summer heat of about 85 degrees F and there is only a slight amount of pan fluid drag compared to tilt fluid drag a number of times more. The difference is so extreme it is useless for video since it is so easy by error to pan it you I try to tilt it. When I use long lenses such as 400mm and 1250mm I use a rubber band on the pan arm but it is impossible to gently tilt without it panning. Using the pan lock as a brake does not work. I went back to using my 10 year old Velbon leaking PH-368 tripod head and tripod of which results in much better video. I contacted B&H and it was beyond exchange time and they said to email the E-Image company for warranty. I emailed them and never heard back and sending a product to China for warranty I won't do to lack of recourse if I never get it back. So now the question is do you have a drawing break down for the fluid head to see if I can disassemble it to increase the fluid drag? Another issue though more minor is the counter balance spring is not preset to place the sliding plate mount level but rather it measures angled up at about 20 degrees. This can be corrected by sliding the camera plate all they way forward except if the lens and camera combination is too light with the plate all the way forward it still tilts upward. A very minor issue is the spring loaded hook fell off though it does not matter since I never used it anyway.

A: It is most unfortunate that you have had this negative experience. This is of course not what we at B&H wish for our customers.B&H can only offer is return or exchange on items purchased within 30 days. After that, we must suggest that you contact the manufacturer for we do not have repair facilities. You might try contacting ikan for they also handle the E-Image line of tripods.Email: support@a href= http://ikancorp.com target= _blank ikancorp.com/a or call (713)272-8822.

Q: 5. Is the spreader on the tripod removable?

A: yes the spreaders are removable

Q: 6. Does it come with the handle for panning and tilting? I noticed that the handle is listed as an accessory and is not listed on the whats in the box portion.

A: Yes Shopper, it is included.

Q: 7. What adapter to use to make e-image gh06 tripod compatible with tilta's shoulder mount (arch-swiss or manfrotto)? detail please

A: The E-Image GH06 Head with 2-Stage Carbon Fiber Tripod Legs does not use a Arca-Swiss or Manfrotto quick release plate, but you could mount the E-Image GP1 Quick Release Plate to the base of your shoulder mount, which would work with the GH06 fluid head.

Q: 8. Can the head be removed if I want to replace it with another head and/or mount a slider on it?

A: Yes it can! I do so frequently to either use a different head or use the head of the tripod with another rig.

Q: 9. Will it accept a Manfrotto quick release plate?

A: Yes, it will. E-Image heads manufactured after August 2015 are compatible with Manfrotto plates. Those made before then are not.

Q: 10. what is the material used in the build of this product?

A: Aluminum predominately. Some plastic in handles and locks. Best feature? One handle to size and lock each leg. A time saver.