You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

E-image Gp2 Camera Plate For Gh15/25 Fluid Video Heads

E-image Gp2 Camera Plate For Gh15/25 Fluid Video Heads
  • Product Code: eq176182
  • Availability: In Stock

$253.14 $344.27

The E-Image GP2 Camera Plate for GH15/25 Fluid Video Headsis a sliding video camera plate for the GH15 and GH25 E-Image tripods. The camera plate features a slotted base plate designed to balance the camera, 1/4" and 3/8" screws.

Parameters
CompatibilityGH15 and GH25 heads
Dimensions6.3 x 2.8 x 0.5" (160 x 70 x 13 mm)
Weight0.4 lb (170 g)
Packaging Info
Package Weight0.6 lb
Box Dimensions (LxWxH)7.795 x 5.354 x 2.362"

Compatible with GH15 and GH25 fluid video heads

Rubber anti slip plate pads

Related Questions and Answers

Q: 1. What is the weight of this head?

A: This head weighs 4.5 lbs.

Q: 2. Is it compatible with Manfrotto 501 base plates?

A: No, this head is not compatible with the Manfrotto 501 plate mechanism.

Q: 3. Are there any compatible quick releases for the gp2 plate? looking to add one to my shoulder rig.

A: We are not aware of a Quick Release System that is compatible with the GP2 plate. However you could always install a quick release assembly like the Manfrotto 577 to both the top of this tripod and your shoulder rig. From there you will be able to switch between the tripod and shoulder rig with a Manfrotto 501PL style plate.https://bhpho.to/2mRIakh

Q: 4. What's the thread size? Wondering if this would work for a Manfrotto tripod head.

A: Hello,The thread on this lock (and on the 75mm E-Image video heads) is a metric M8-1.25 (M8 is the size, 1.25 is the pitch). I cannot speak to the threads on a Manfrotto head, though.

Q: 5. Hello! Tell me please if this ball can be turned to a half ball to match slider dolly?

A: Hi , I used it with Ikam - IK -RSR6 Hi - Hat Riser, work 100.BRRenzo M

Q: 6. Will this fit an E-Image EG01A2 Two-Stage Aluminum Tripod?

A: We're afraid not. The E-Image EG01A2 has a 65mm bowl, which is an odd size found on the GH01 Pan/Tilt Fluid Head it comes with.https://bhpho.to/2kAaK9f

Q: 7. Is there fluid in this head or just friction disks? Everyone says fluid these days but it doesn't mean it actually has it.

A: I'm guessing is friction, I've never opened it so I don't know, but the fluid is not talking about a liquid, is talking that it has a fluid movement.

Q: 8. Differences between GH03 and GH06 besides obvious ball vs flat base?

A: The GH03 has a 13lb / 5kg load capacity while the GH06 has a 13lb / 6kg load capacity. The counter balance for the GH03 is fixed while the GH06 has an incremental 5-step plus 0 counter balance.

Q: 9. Can this head be used with the Feisol Tournament CT-3442 Tripod or the Gitzo Lightweight Traveler Series ?

A: The Feisol CT-3442 and the Gitzo Traveler tripods do not take bowl-based fluid heads. You'll need to get a flat-based fluid head.

Q: 10. Is the handle included? Can you remove the handle?

A: Yes it comes with a handle. Yes the handle can be removed if necessary.

23/09/2024

[0.4 lb (170 g)] Bought this about a year ago. I use medium size rigs on it. built up c70 with Ninja V and follow focus and other not so heavy things. I'm guessing about 6lbs. This works like a champ!


Its smooth and the drag controls are spot on. They're tuned to each other, meaning if you put the tilt on 2 and pan on 2, you can make a nice circle movement and not notice any difference in the two resistance. Not to mention completely repeatable, unlike those friction clutch systems.


The counter balance system is great too. But if you use just a dslr or mirrorless by itself, it may be too light for the counter balance, even at the 1 setting. Some people mentions that there is no in between increments (there are only 4 settings), but I had yet to have a rig not balance on those 4 settings.


The locks are great and nothing moves once locked. but I don't like the placement of the pan lock. Its too tucked in. You have to fumble around like a teenager trying to... never mind.


I like the way the handle can telescope out. The longer handle will give you less shake, if using a very long lens or you had too much coffee.


The ball lock is good too. Never had it slip on me yet. Its not the most comfortable shaped knob but since you don't have to twist it that hard lock or unlock, its not too bad.


I wish the head was lighter, but its a video head, I guess you really can't skimp on weight. This is a couple of notches higher than your budget friction fluid heads for sure. Love it!

5
22/09/2024

[0.4 lb (170 g)] I'd ordered this plate for a Libec RH25D fluid head. Rather than attach a plate to a camera immediately prior to mounting on a head, I tend to leave them permanently attached to a camera for quick access, and I needed an extra plate, this plate is perfect.

5
14/09/2024

[0.6 lb] If you combined the performance of the Manfrotto 502 head with the footprint of the 500... at a cheaper price tag, you'd have this. The GH03 is perfect if you're doing a run and gun shoot with a mono-pod.

5
27/08/2024

[0.4 lb (170 g)] Where do I start? I bought this to replace a missing knob on a Manfrotto MVH500A video head. With minimal skill and no instructions, I was able to screw it into place, all by myself! Next, I found that by tightening it, the knob will actually lock the video head pan direction. Whoa! Incredible! After a bit of investigation, I discovered that loosening the screw actually unlocks the pan direction. Oh my, this is amazing technology! The product is very high quality, with a precisely molded plastic knob and a perfectly threaded screw. The knob is a lovely shade of black that compliments the MVH500A video head. I anticipate hours of enjoyment with this screw. Highly recommended!!!

5
13/08/2024

[0.6 lb] This plate is gold. We lost our plate and needed to order a replacement. The LX 7 head is easy to use and light enough to haul around the field with. I suggest having a spare plate if you have multiple tripods, users and cameras. Thanks B & H for the fast shipping.

5
24/07/2024

[0.6 lb] Although the GH03 has limited features, I find the non-adjustable pan drag to be good, as is the adjustable tilt drag. I also like it because the counter balance is somewhat heavier than the some other heads in this price category, allowing me to balance and hold tilt with my camera (Nikon D500) and most of my lenses. Appears to be well made with all or mostly metal parts. Nice long camera plate, too.

5
05/07/2024

[0.4 lb (170 g)] Replacement screw for the pan lock on select Manfrotto MVH500 tripods. Worked like a charm when the originals went missing.

5
19/06/2024

[0.6 lb] This is by far the best Manfrotto Replacement Pan Lock Knob out there. I've tried a lot of pan lock knobs in my day and this is far superior than any other pan lock knob I have ever tried. Highly recommend you use a fluid video head with this product although it does wonders on its own. Great feel. Great look. Great product.

5
16/06/2024

[0.6 lb] I have been using this ballhead for two years, and still impressed with level of smoothness and precision. Haven’t seen anything nearly as good in this price range. Perfect for small to medium sized setups.

5
14/06/2024

[0.4 lb (170 g)] Fluid movement, and easy to operate

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

E-image Handle For Gh15/25 Video Heads

$239.97 $357.56

E-image 75mm Bowl Knob For Fluid Heads

$59.85 $73.02

E-image Heavy-duty Fluid Video Head

$4,497.00 $6,250.83

E-image Heavy Duty Fluid Video Head

$11,997.00 $17,395.65

E-image Gc102 Carbon Fiber Tripod With Gh15 Head

$6,597.00 $8,444.16

E-image Gh10l Pro Fluid Video Head 100mm

$3,597.00 $5,395.50

Products You May Like

Tiffen Black Fog Filter 4x4 Grade 1/4

$738.00 $937.26

Red Panda Context 2 Algorithmic Reverb Pedal

$987.00 $1,312.71

Straight Brass Instrument

$296.85 $368.09

Rdl Av-nl2 Dante Stereo D/a Converter

$1,292.94 $1,823.05

Westcott Flex Cine Bi-color Mat 1x3ft

$3,299.70 $4,784.56

Bridge X_sdi Av Signal Effect Sync Converter

$2,277.00 $2,869.02

Sirui Ks-30 Qr Ball Head With Arca Plate

$387.00 $615.33

Da-lite Contour 166" Hc Cinema Vision Screen

$13,332.00 $20,664.60