The nickel Burris Optics 2-7x32 Handgun Scope Plex Reticle Nickelfrom Burris Optics 2-7x32 Handgun Scope Plex Reticle Nickelis specifically designed for precision shooting at distance in the field or at the range. Its optical system uses index-matched Hi-Lume multi-coated optics to produce views that are bright and clear with high contrast and true color representation. Burris engineered it with a long eye relief that is essential for high-power handgun hunting. The low minimum power gives users a slight magnification boost while providing a distinct aiming point with the reticle. Dialing the zoom up to 7x brings targets closer without excessively narrowing the field of view.

Covered turrets keep rain, mud, and dirt off while eliminating the possibility of accidental adjustments while moving through heavy brush. The turrets are also finger-adjustable to quickly compensate for changing conditions in the field. Built for a long life in the field, the one-piece main-tube is made of lightweight and durable aluminum with a scratch and corrosion-resistant nickel finish. The optical tube is nitrogen-filled and O-ring sealed for water and fogproof performance in all weather and conditions, and its 1" main-tube keeps the weight down while also being easier to mount on handguns than large diameter tubes.

Duplex Reticle, 2nd Focal Plane    One-Piece 1" Main-Tube    1/4 MOA/Click Impact Point Correction    64 MOA Windage/Elevation Adjustment    Capped Low-Profile Turrets    Nickel Anodized Aluminum Housing    Hi-Lume Multi-Coated Optics    Nitrogen-Filled, Water and Fogproof    Lightweight: 13 Ounces

• 2-7x zoom magnification
• 35mm objective lens
• Index-matched, Hi-Lume multi-coated lenses reduce glare while improving light transmission to produce high-contrast images with true color representation
• 21-7' field of view at 100 yards
• 10-21" eye relief
• 16-4.6mm exit pupil

• Traditional duplex crosshair
• Thick outer posts are easily visible, even in low light
• Thin hairs provide precision aiming point without obstructing target
• Rear (second) focal plane placement

• 1/4 MOA per click impact point correction
• ±32MOA windage and elevation adjustment range
• Turrets
  • Low-profile to limit snags
  • Finger adjustable for fast adjustments in the field
  • Capped keep dust, dirt and mud out while preventing accidental adjustment
  • Re-settable to zero after initial sighting
• Parallax free to 100 yards

• One-piece 1" main-tube
• Lightweight and durable aluminum alloy housing
• Scratch and corrosion-resistant nickel anodized finish
• Nitrogen-filled, water and fogproof
• Double internal spring-tension system to hold zero through shock, recoil, and vibrations
• Weight: 13 ounces

Related Questions and Answers

Q: 1. Can the cross bar on the be use under smaller configuration??? It says 4 piece cross bar. Can you use 2 or 5 of the pieces to use it as a smaller unit??

A: The crossbar in this kit can be used in either 2, 3 or 4 sections to allow the use of smaller or large backgrounds.

Q: 2. I love this backdrop...but it has been folded up in storage for quite some time. I am in need to get the wrinkles out of the fabric. Could I use a simple steamer?

A: You can use a simple hand held steamer to minimize the wrinkles on this background.

Q: 3. Will this work on a Sony A77ii?

A: Yes, the Delkin Devices Sensor Scope would be compatible for use with the Sony A77 Mark 2 Digital Camera.

Q: 4. Has anyone washed this in the machine, cold water, gentle cycle? Was it okay afterward?

A: This can be machine washed.

Q: 5. WIll this work well with the Leica M240 or M246 ?

A: Yes, the Delkin Devices Sensor Scope will work with the Leica M240 and the M246.Just you might need to pull it a little further away from the camera because the sensor is closer to the lens mount than DSLR cameras.

Q: 6. Will this work for a Nikon z6 Sensor?

A: Yes, the Delkin Sensor Scope is compatible with the Z6.

Q: 7. Do they help reduce shadows compared to a white wall?

A: Backgrounds do not reduce shadows. You will need lighting specifically for the background if you wish to remove shadows.

Q: 8. Will this sensor fit a Leica M8.2 body?

A: I found this comment in an online review of the Sensor Scope and Leica camera: This works brilliantly. I tried it with several cameras, including a Canon1Ds MKII and 5D, and also a Leica M8. The Leica has a different lens flange to sensor distance so I had to reposition the SensorScope a bit, but it still worked very well to illuminate and show dust.

Q: 9. I was referred by celestron technician using this telescope tube as a finderscope. The original finderscope goes with the 8'' reflective telescope tube is very shaky on its mount. Does anyone know if this 70mm telescope fit well on the 8'' tube?

A: I bought this telescope for my son in 2015. The 70mm telescope does fit well on the 8 tube. My son has been super happy with this telescope, hes been able to pack it up and take it camping with us and its extremely strudy. Definitely a good buy.

Q: 10. This fits the scope and the eyepiece together?

A: For the Kowa TSN-661 and TSN-663 66mm 45° angled spotting scope. with eyepieces.