You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Burris Speedbead Fastfire 3 For Benelli Super Black Eagle Ii

Burris Speedbead Fastfire 3 For Benelli Super Black Eagle Ii
  • Product Code: eq176255
  • Availability: In Stock

$899.97 $1,358.95

The Burris SpeedBead FastFire 3 for Benelli Super Black Eagle IIfrom Burris SpeedBead FastFire 3 for Benelli Super Black Eagle IIfeatures a 8-MOA red aiming dot, which is big enough to see in the daylight, but won't obstruct small varmints. Three brightness levels lets you set it to your preference, or switch it to auto and the light sensor will detect the amount of available light and adjust the brightness itself. The FastFire III is made of aluminum with a matte-black anodized finish, and is waterproof and submersible. This sight is offered without a mount. Mounts are sold separately for a variety of rifles and pistols.

FastFire 3 Dot Sight    8 MOA Red Dot Reticle    0.8x0.6" Sight Window    1 MOA/Click Impact Point Correction    115 Windage/86 Elevation MOA Adjustment    Automatic or Manual Reticle Intensities    SpeedBead Mount for Attachment    Mounts Between Receiver & Rear Stock    Low, Natural Line-of-Sight Dot Placement    1/8" and 1/4" Risers Included

Key Specs
Power Source1 x CR1632
Magnification1x
General
Power Source1 x CR1632
Sight Window Dimensions0.8 x 0.6" / 21 x 15 mm
Optics
Magnification1x
Adjustments
Impact Point Correction1 MOA
Windage Adjustment86 MOA
Elevation Adjustment115 MOA
Environmental
Operating Temperature-10 to 130°F / -23 to 55°C
Physical
Water ResistanceWaterproof
DimensionsL: 1.9 x W: 1.0 x H: 1.0" / L: 4.8 x W: 2.5 x H: 2.5 cm
Weight0.9 oz / 25.5 g
Packaging Info
Package Weight0.25 lb
Box Dimensions (LxWxH)6 x 4.6 x 1.6"

  • 1x magnification
  • 0.8 x 0.6" objective lens window
  • Fully coated optics for increased light transmission

  • 8-MOA red dot with three intensity levels and an automatic brightness mode
  • 1 MOA impact point correction, 30 MOA per rotation travel
  • 86 MOA windage, 115 MOA elevation adjustment range
  • Parallax-free from 10 to 150 yd

  • Aluminum housing
  • Matte-black corrosion and scratch-resistant anodized finish
  • Top-loading battery compartment enables battery changes without removing the sight
  • Waterproof and submersible

Related Questions and Answers

Q: 1. Has anyone used this in cold climates? How smooth?

A: This head is smooth in colder climates.

Q: 2. Does the background come ready to set up or do you have to buy a seperate support for it?

A: Yes, you will need to have some other support. A wall will work, but you will need to adjust your lighting accordingly. I also purchased some gaffers tape the same color as the screen to help secure the floor, if necessary.

Q: 3. Does this item include wedges or do they need to be purchased separately?

A: No. wedges are sold separately.

Q: 4. Will this work? I want to use the clamp side to go onto a c stand and the other side to attach to a 6'x6' diffusion. I want to be able to adjust the clamp to get certain angles. Hope this makes sense.

A: This clamp would not be ideal for that. It would be better to use a End jaw and Grip head.

Q: 5. Does this fit the Pavoslim 120B controller too?

A: Yes, the Nanlite Quick Release Super Clamp does fit with the Nanlite PavoSlim 120B controller.

Q: 6. how much does this gimbal weigh?

A: The Fotopro E-6H Eagle Series Gimbal Head weights 2 lb / 907 g.

Q: 7. Do I need accessories to be able to level the gimbal head?

A: The gimbal head has a level so that you can level your tripod using the bubble on the gimbal but a leveling base would be ideal to use in conjunction with this head. You can click on the link below to view; https://bhpho.to/2QEeZ43

Q: 8. Will this work with the new Nanlite fc300? I got some for the Fc500's but it looks like the fc300 is a regular vmount lock.

A: The Nanlite Quick Release Super Clamp for Forza 720, 500 II, and 300 II is only for the Forza 720, Forza 720B and Forza 500 II.

Q: 9. Does this come with L bracket,clamp and plate seen in the images.

A: Yes, it comes with everything that is pictured.

Q: 10. does this seamless need stands?

A: It works better when supported. It has a metal band that frames part of the backdrop. I use a tripod on one side and pin the remainder to the wall.

21/09/2024

[1 MOA] Increase my hit ratio by 70% or more! I’m amazed by this thing strong construction and works great. I struggled with shooting with both eyes open but with this it just feels natural

5
06/09/2024

[115 MOA] Have had many different top brands of optics on my competition rifles. Burris is the clearest and most well made

5
05/09/2024

[1x] Easy mount to the 870. Worked perfectly until I broke the lens, no fault of Burris just abuse. Burris replaced it, no questions asked.

5
29/08/2024

[1 x CR1632] I have a Benelli M2 which is not tapped for a scope. I read the previous reviews on the SpeedBead, but decided to give this a try anyway. So far, for my M2, this is a solid mount for the FF3. This mount just replaces the shim between the receiver and the stock. The shim has dowels that press tightly into both the receiver and the stock at the top and the bottom. They were tight going in, but pressed in nicely when I tightened down the bolt for the stock. Once in place, there is no difference between how the SpeedBead and the original shim fit between the receiver and the stock. The mount is tight against the receiver to the front of the mount and the stock to the rear. The SpeedBead & FF3 came w/additional mounting plates to adjust the height of the FF3. I did not need to add any additional height to mine though, the sight falls right in line w/my sight nicely. This package also came w/two sets of screws of different lengths, for use when adjusting the height. It also came w/the battery. And, it includes a protective/sun cover. The FF3 is easy to turn and adjust the red dot brightness and it automatically turns off after a period of time. As I use this system more, I will update my review to reflect my experience w/the SpeedBead mount and FF3 red dot sight.

5
28/08/2024

[1x] I have had a Speedbead for about 7 years now. Works perfectly on my 1100, 11-87, and my 870. Soooo much better than the old Weaver Qwik-Point from years ago. Ran a straight at Skeet the first time I took it out. Thank you for making excellent products.

5
27/07/2024

[1x] At 72 years old, my eyes are getting tired and I thought I'd never shot a shotgun again. After a friend showed me his SpeedBead sight, I knew it would help me but WOW, did it ever.When I draw up on a bird, I now know exactly where I am shooting because I can focus on the bird and see in my peripheral vision where the red dot is. It does not block out the bird, only show relationships. It really improves the sight picture in low light such as early in the morning or just before quitting time. It is also good for dark days as well. The mounting system is well designed and relatively easy to install.Sighting in is a simple alignment with the present front bead sight of your shotgun. It stays on target once sighted in.

I have never been a good shot but after installing the SpeedBead my shooting improved . The last four days of goose season, I shot 12 times. I bagged 6 geese. That includes an opportunity where I & my partner pulled up on a dozen geese early in the morning and both emptied our guns without a single hit. The birds were legs down into the decoys at 30 yards. First flock of the day. Man were they lucky. Even with the Speed Bead, you can't flock shoot !

I even purchased a second mount to go onto another shotgun I use for ducks and pheasants. Obviously I recommend this sight.

The next improvement would be for Burris to develop additional mounting systems for more manufacturers and for 20 ga shotguns. While its a big investment, it is well worth it your me to keep shooting.

5
27/07/2024

[Waterproof] Mounted on my Beretta A400 Xtreme Plus. Works great.

5
11/07/2024

[1 x CR1632] Bought SpeedBead quite awhile ago and through sporting goods manager he sold me the #30041for a Benelli M2,etc.Remember there is no listing for my 20ga SuperSport so I gave it a try and worked like a charm.There is a little part of the mounting bracket that extends out from the stock and action.Its so little its not worth trimming or doing anything.Happy!I would recommend camphor the hole on the bracket so roll pin goes through and doesn't stick on assembly.

5
07/07/2024

[1 x CR1632] Purchased my new Speed Beed for my M2. Three shots later i put 74 pellets in the kill at 40 yards. Amazing how you can see the difference in shot placement then using a fixed beed on a barrel. And i have taken two turkeys with it so far. Can’t wait till duck season. Thanks for a great product! T. Kelsoe Hartselle,AL

5
04/07/2024

[1 MOA] I have this on rem 870 Turkey with thumbhole. Perfect in line sight picture. Have l handled 3.5 recoil great and has zero issues. I love it and have referred numbers people once they experience.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Burris Speedbead Mount Riser 1/8"

$37.17 $46.09

Burris 1" Scope Tube Fastfire Mount

$159.00 $216.24

Burris Ar-f3 Fastfire Mount For Optics

$269.97 $356.36

Samsung Qbr-n 85" Hdr 4k Uhd Smart Led Display

$10,500.00 $15,855.00

Products You May Like

Gator Wooden Piano Bench Black

$179.97 $235.76

Schneider 4x4" 1mm Blue True-streak Filter

$880.20 $1,170.67

Fujinon Ss21d-af Full Servo Kit | Af Lens

$68,730.00 $83,850.60

Dragonfly Recessed Motorized Projector Screen

$7,706.40 $9,247.68

Sealife Pro Flash O-ring And Gasket Set

$44.85 $61.00

Tiffen 86mm Cool Day For Night Filter

$583.50 $711.87