The black IPS-V230S 3-RCA (R/G/B) to 3-RCA Bulkhead Video Insert from FSR is a single height video insert module that allows for the connection of a 3-RCA (R/G/B) to 3-RCA bulkhead video connectors. The labeled insert can be installed in any compatible IPS wall plate opening or under table mount.

The IPS-V230S is a member of the IPS family of inserts. Components in this series can be combined to create custom interconnect solutions and can be mounted on walls or under tables. The insert module is suited for use in classrooms, conferences rooms, lecterns, lobbies, churches, airports, hotels, and hospitals, among many other possible uses and applications.

Video Connector Insert

Labeled for input clarity.

This video insert allows for connection between 3 x RCA, R/G/B, to 3 x RCA bulkhead connectors.

The insert can be installed in any compatible IPS Wall Plate Opening or Under Table Mount.

The insert connectors are mounted to steel plates.

IPS series designed to meet many audio-video interface applications and can be combined to create custom solutions that mount on the wall or under tables.

Suited for use in classrooms, conferences rooms, lecterns, lobbies, houses of worship, airports, hotels, and hospitals applications.

Related Questions and Answers

Q: 1. Will the byob 7 hold a Leica Q3?

A: Yes, the Tenba BYOB 7 Camera Insert Black will fit a Leica Q3 Digital Camera.

Q: 2. What is the smallest size I should buy to store an A7R3 with a Sony 50mm f2.5 attached, and the Sony 24mm f2.8?

A: The Tenba BYOB 9 Camera Insert Black will be the best size for storing the Sony a7R III Mirrorless Camera, the Sony FE 50mm f/2.5 G Lens, and the Sony FE 24mm f/2.8 G Lens.

Q: 3. Will this fit a Sony a7iv with a 24-70 on it? Or just a 50mm

A: The Tenba BYOB 7 Camera Insert Black will not hold the a7 IV with the 24-70mm lens or the 50mm lens. It can hold the camera body alone.

Q: 4. Q1:Does it distribute video signal with timecode embedded ? Q2: Does it distribute timecode/ genlock signal from a third timecode or genlock generator?

A: No, The Shinybow 1 x 4 Composite Video Distribution Amplifier would not pass or support timecode/Genlock.

Q: 5. Would there be enough room to fit a Fujifilm X-T3, as pictured in the main photo, but with an Arca bracket attached? The bracket adds a half inch to the camera height.

A: Yes, that would fit in this bag.

Q: 6. Can this work for clamp on matte box ?

A: Unfortunately the answer is no and that is because this is meant for only a passive connection between the lens and the matte box. In other words, the matte box must be supported by rods while using this. The interface between the lens and the matte box cannot be trusted to hold the matte box on the lens.

Q: 7. Will this fit a Mavic 3 Pro? It's within .6" and I know it's padded? Thanks B&H

A: Yes, the Tenba BYOB 9 Camera Insert Black can accommodate the DJI Mavic 3 Pro Drone.

Q: 8. Can this housing simultaneously run an HDMI to the camera and/or an HDMI/B&C cable to a monitor on the surface?

A: No, the Aquatica 5HD Underwater Monitor (16mm Bulkhead, HDMI Type A, Black) does not have an HDMI out port.

Q: 9. Will an npf790 fit inside this housing? Or is the 770 the largest capacity battery that will fit?

A: Yes, the largest battery you should use with the Aquatica 5HD Underwater Monitor is a NP-F770 battery pack. It will not work with anything larger, such as an NP-F970 battery pack.

Q: 10. I want to use this monitor off-camera. How long can the HDMI cable be between camera and monitor?

A: Upon inspection, it appears that the cable that comes with it is installed with the unit, so the length of the cable that is on it is the length that is used. Unfortunately according to Aquatica, because of all of the wiring and connections, this is the longest they could safely make the cable