The JBL CSA 180Z 80W Audio Amplifierprovides a compact and powerful amplification solution for installed applications. The unit utilizes a universal switch-mode power supply and Crown's DriveCore technology to deliver reliable and efficient sound amplification.

The unit supports both 70 and 100V installations out of the box. It includes 1 x RJ45 connector for use with the company's CSR-V in-wall volume controls. Inputs are provided by mono sum RCA connectors and Euroblock. Outputs are provided by Euroblock connectors. Illuminated knobs provide visual feedback, and the universal power supply allows the amplifier to accept AC voltages from 100 to 240 VAC, 50/60 Hz. The amp also fulfills HARMAN's GreenEdge environmental initiative.

80W into 4 or 8 Ohms    Switch-Mode Universal Power Supply    DriveCore-Based Amplification    Supports 70V and 100V Installations    RJ45 Connectors for JBL CSR-V Controls    GreenEdge Environmental Initiative    Fanless, Space-Serving 1 RU Design    Sleep Mode Disable Function    Illuminated Knobs

• 1 output channel with 80W per channel
• Built-in 70V and 100V
• Fanless, space-saving 1U design
• Sleep mode disable function
• Energy-efficient amplifier
• Sleek industrial look with illuminated rings making knobs easy to see and use
• Supports JBL CSR-V wall controller via CAT5 cable with RJ45 connectors
• Universal power supply
• Energy Star Certified

Related Questions and Answers

Q: 1. I just read Bass, Treble, and Balance Controls YET if you look at the photo of the face --NO bass, NO treble, NO balance controls? Where are they?

A: To get to change the Bass, Treble, Balance, there is a button labeled Audio Functions press it and it goes thru all three choices to you can change it to how you like it.The EQ button gives you optional pre set sounds Classical, Flat, Pop, Jazz, JazzRock sounds best to me.I just wished it allowed 2 sets of speakers. I always make sure I turn the speakers down to off before I snap it off or on, so I don't blow anything..

Q: 2. Could this work to power 4 Freespace DS 16F speakers? Thx

A: The Bose Professional FreeSpace DS 16F 2.25" 16W Passive Loudspeaker has transformer taps for 70V and 100V connections, as well as an 8-ohm bypass setting that specifies 16W RMS and 64W peak for each speaker. The Bose Professional FreeSpace IZA 250-LZ Integrated Zone Amplifier specifies 2 channels of speaker output offering 25W at 8 ohms, or 50W at 4 ohms. You could potentially squeeze in two DS 16F speakers on each channel if you wired them in parallel, which would create a 32W RMS load at 4 ohms. Ideally you would want to use an amplifier offering more adequate output power for this model and quantity of speakers.

Q: 3. How long will the battery last while continuously on and not at full power?

A: How long a battery will last when used with the Weeylite Ninja 300 Portable MINI 80W MINI LED Spotlight will depend on the specifications of the battery. Also, battery usage will typically only be indicated at the light fixture's full power setting. As an example, the Watson NP-F970 High-Capacity Lithium-Ion Battery Pack (7.4V, 10,050mAh), B&H # WANPF970, would give you approximately 55 minutes at full power output with this Weeylite Ninja 300 Portable MINI 80W MINI LED Spotlight.

Q: 4. Does anyone use the digital audio port of the soundslayer with a m1 macbook pro? and if so, how did you manage to make it work?

A: To be able to go from the headphone output of your computer into the optical input on the Panasonic SC-HTB01PP soundbar, you will need to use BH #GEATVDA.

Q: 5. Is the LED bulb's brightness (lumens) the same or less than as an incandescent bulb?

A: The led lamp draws up to 80 watts and is in most casers brighter than an 80 watt incandescent bulb. Lowel/Tiffen does not list the actual lumens of the bulb. But it is brighter than a 60-80 watt tungsten house hold bulb.

Q: 6. Are the analog connectors available as inputs/outputs when running dante?

A: Yes, the analog input and output connectors on the LEA Professional CS164D ConnectSeries 640W 4-Channel Networked Amplifier are available when running the Dante protocol.

Q: 7. Can this amp be used to power MCM 55-10345 tweeter array? These are not powered and can't be heard, or would some other small amp work? Any suggestions. Thanks, EYD.

A: Yes it can.

Q: 8. What's included?

A: The following items are included with the purchase of the Weeylite Ninja 300 Portable MINI 80W MINI LED Spotlight: Weeylite Ninja 300 Portable MINI 80W MINI LED Spotlight, Carry Case, Reflector, Carry Strap, Lanyard, Power Adapter, and the Limited 1-Year Warranty.

Q: 9. Will a Rifa 88 LED upgrade fit a Rifa 55 eX?

A: This Lowel LED Upgrade Kit is specific to the Rifa 88.

Q: 10. Will these replacement bulbs work for Rifalight LC-55? The description says EX... not sure they are the same thing? Many thanks.

A: The Lowel Rifa EX 55 LED 80W Bulb & Diffuser Kit is compatible with EX lights; it is not compatible with the Rifalight LC-55.