Da-Lite 24867Eb Tensioned Large Advantage Deluxe Electrol Screen

Da-lite 24867eb Tensioned Large Advantage Deluxe Electrol Screen

Product Code: eq176382
Availability: In Stock

$2,800.80 $3,472.99

Qty

14 reviews Write a review

Description
Reviews (14)

For larger venue installs, the 220V Da-Lite 24867EB Tensioned Large Advantage Deluxe Electrol Screenfrom Da-Lite 24867EB Tensioned Large Advantage Deluxe Electrol Screenis designed to eliminate the extra step of finishing the screen with trim. The Advantage line of projection screens is designed with ceiling trim already in place. Once the case is installed, the integrated trim conceals the rough opening, eliminating the need to complete additional trim work. Sliding installation brackets make it easy to attach the screen housing to the structure above the drop ceiling.

Tensioned screens ensure the smoothest surface possible, and the screen features a closure door that hides the open space and screen in the ceiling, providing a cleaner aesthetic. The screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

Box Only (No Screen Fabric) 298" Diagonal / 16:9 Aspect Ratio HD Progressive 1.3 Surface 1.3 Gain / 150° Viewing Angle Closure Door Hides Open Space Slim-Tab Tensioning Tabs Installs Above the Ceiling White Powder-Coated Aluminum Case

Key Specs
Front/Rear Projection	Front
Aspect Ratio	16:9
Diagonal	298.0" / 756.9 cm
Gain	1.3
Tensioned	Yes
Type
Series	Tensioned Large Advantage Deluxe Electrol
Front/Rear Projection	Front
Aspect Ratio	16:9
Style	Ceiling-Recessed
Dimensions
Viewing Area	146.0 x 260.0" / 370.8 x 660.4 cm
Diagonal	298.0" / 756.9 cm
Surface
Gain	1.3
Viewing Angle	150 degrees
Masking	All Four Sides
Tensioned	Yes
Black Backing	Yes
Casing
Finish	Aluminum
Length	294.2" / 747.4 cm
General
Voltage	220 VAC/50 Hz

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

Related Questions and Answers

Q: 1. can extensions be added to this arm for example if we need to to be 18 inches instead of 9 ? I am looking for a wall mount that can be swung out of the way for a small camera so when we use the camera we will swing it out when we are not using the camera it can be stored against the wall

A: Yes, I have ordered many of these units and mixed and matched the poles to make several mounts of varying sizes. Each pole extension uses the same 1/4 -20 screw size, so even the camera could mount directly to the pole rather than the ball mount.

Q: 2. Does this include the 8pin cable with the controller?

A: This controller comes with a 40 inch 8-pin cable.

Q: 3. Will this work on the CN17x17 Cine Servo Lens?

A: It will not. This product is for the Canon CN-E 18-80mm and 70-200mm Lenses only.

Q: 4. Can this zoom control also work with a Fujinon 19-90 lens?

A: The VariZoom VZPGC20 20-Pin Zoom Control for Canon CN-E 18-80mm & 70-200mm Lenses is designed for Canon lenses. The recommended zoom control for the Fujinon ZK19-90mm T2.9 Cabrio Lens (PL Mount) would be Fujinon Digital Zoom Demand Controller for ENG/EFP Lenses, BH #FUERD10AD01M.

Q: 5. Is this controller ambidextrous?

A: As my father was a south-paw, I understand your concern. While we have not tested it, we would say that you should have no real issues using this on the left pan handle. The record button may be a bit of a stretch for your left thumb but other than that, you should be fine.

Q: 6. Will this work with a Sony PXW-Z280?

A: Yes it should. The PXW-Z280 has a LANC input for a controller, which is the kind of connection this product has. They should work well together.

Q: 7. Will this work with a Panasonic HC-X1000?

A: This controller is for Sony and Canon LANC compatible cameras. It will not work with the HC-X1000, however we do have some Panasonic compatible controllers that will work. B&H # VAVZPROPZFI is the Panasonic version of this controller and is a good fit for the HC-X1000.

Q: 8. Does this zoom controller work with the Canon CN-E 18-80mm lens?

A: Yes, the VariZoom VZPGC20 20-Pin Zoom Control for Canon CN-E 18-80mm & 70-200mm Lenses is compatible with the Canon CN-E 18-80mm lens.

Q: 9. how far does the arm extend?

A: Using the included aluminum shafts it can extend 2 , 4 or 6 .

Q: 10. Does this come with the clamper to put on a tripod arm?

A: Yes, the clamp is included.

Gab Laughin	29/09/2024
[1.3] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projection screen/case up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem! 5

Saralouise	13/08/2024
[Front] This product fit our need perfectly. Correct size for our stage and social hall. 5

Yvenson	19/07/2024
[Yes] I love this product, Easy to install and and look even better on the wall. 5

Cat5 King	21/06/2024
[1.3] This screen was installed in a small conference room with an NEC projector. The screen can be wall or ceiling mounted, and this flexibility came in handy when we had to switch to a ceiling mount at the last moment. The screen presents very well, and is unobtrusive when retracted. The tensioning system works nicely, and we didn't have to change any of the factory settings for the drop. I would have liked to see some additional mounting holes for attaching the screen to studs in the wall, so the installer has more options for wall mounting. 5

Andreas the squint	21/06/2024
[1.3] I used this screen in a small conference room and it was very simple to instal. 5

Rikilah	01/06/2024
[Front] This Screen was easy to install. It took 3 people and 2 ladders to get the job done. The remote is really not needed but i opted to install it as well. The motor runs really smooth. The screen is nice and wide. A really good buy. 5

Gab Laughin	26/05/2024
[Front] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projector up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem! 5

petarm	16/05/2024
[Aluminum] We use the electrol screens almost exclusively in close to a 100 locations. They are versatile and durable. 5

Doug	14/05/2024
[Front] Looking forward to getting all of this stuff together 5

S_Kim	05/05/2024
[Aluminum] I have used this Da-Lite screen for the past 3+ years. This is actually my second purchase. Compared to some brands and products, the price is reasonable. The design is solid, great for portable use and easy to setup. However, it weights close to 70 pounds. A great product nonetheless. 5