Lg2125 Two-Channel Lite Guard Cable Protector By Elasco

Lg2125 Two-channel Lite Guard Cable Protector By Elasco

Product Code: eq176420
Availability: In Stock

$419.85 $633.97

Qty

10 reviews Write a review

Description
Reviews (10)

The tough and durable LG2125 Two-Channel Lite Guard Cable Protector by Elascois designed to protect cables and wires from pedestrian and light vehicle traffic, while ensuring that oncoming traffic travels in a safe manner on construction sites, in manufacturing plants, at venues & events, and more.

It is made from lightweight, solid-cast polyurethane, which offers the greatest strength & load-bearing characteristics in its class, a superior tolerance to greases and chemicals, and generates less noise than metal. The black base and orange lid make this product easily noticeable to drivers and pedestrians, while the slip-resistant surface pattern helps minimize slips and falls. Furthermore, the interlocking design allows for linking multiple Lite Guards with one another for short or long runs.

Built to withstand temperatures ranging from blizzards to heat waves, the LG2125 Lite Guard features strong connection points for quick and safe installation, built-in handles for easy transportation, and is made in the USA.

Interlocking Two-Channel Design For Pedestrian & Light Vehicle Traffic Made from Solid-Cast Polyurethane Slip-Resistant Surface Pattern Black Base and Orange Lid for Visibility Strong Connection Points Made in the USA

Parameters
Number of Channels	2
Channel Dimensions (W x H)	1.25 x 1.25" / 3.18 x 3.18 cm
Material	Solid-cast polyurethane
Load Capacity	12,500 lb / 5,670 kg per tire (7 x 7" footprint / 17.78 x 17.78 cm)
Overall Dimensions (L x W x H)	36.00 x 11.50 x 1.75" / 91.44 x 29.21 x 4.45 cm
Weight	13 lb / 5.9 kg
Packaging Info
Package Weight	12.5 lb
Box Dimensions (LxWxH)	37.3 x 12 x 2"

Interlocking two-channel cable and wire guard for light-duty protection

Made from solid-cast polyurethane material – light, not biodegradable, superior tolerance to greases and chemical substances, offers the greatest strength and load-bearing characteristics in its class, generates less noise that metal

Slip-resistant surface pattern designed to minimize slips and falls

Standard black base and orange lid make product easily noticeable to drivers and pedestrians

Strong connection points with easy and safe installation

Reinforced fiberglass rod resists corrosion and rust

Built-in handles underneath the base allow for easy transportation

Easily cleaned and resistant to the fiercest elements

Fully compliant with NEC, OSHA, REACH, RoHS

Made in the USA

Related Questions and Answers

Q: 1. Will this take the left and right trs input and convert it to rca left and right output?

A: Yes

Q: 2. Will it work for 120hz signals? I have a buzz from my turntable and I have tried almost everything and I'm still getting a buzz

A: This style of buzz eliminator is designed for 50 to 60hz.

Q: 3. To be sure, this can record from cd to sd card, sd card to sd card, and SD card to cd?

A: The Tascam SS-CDR250N Two-Channel Networking CD and Media Recorder has the ability to record to SD Cards, USB Flash Drives, and CD-R/CD-RW discs. These media options cannot be chosen as source options however - only destinations. Input sources for recording to these media options would be external and connect to the SS-CDR250N via its back panel.

Q: 4. Tascam SS-CDR250N Q&A Can you alter the pitch or tempo of the Cd and dub it to SD?

A: Sorry, not possible to aleter the pitch or tempo of a CD to be dubbed on a SD card.

Q: 5. What Sony cage is this compatible with?

A: The Sony Cable Protector for Sony DSC-RX0M2, DSC-RX100M7 & DSC-RX100M7G will work with various cages with 1/4"-20 female mounts meant for the Sony Cyber-shot DSC-RX0 II Digital Camera and DSC-RX100 VII cameras.

Q: 6. Can this Rolls HE18 help reduces the hum noise for Audio Technica turntable with MC cartridge & Nakamichi control amp ?

A: It might work. But it makes more sense to tackle the source of the hum before purchasing any devices. Check the cartridge to head-shell wiring. Check and/or replace the RCA cabled from the TT. If possible, ground the TT as well.

Q: 7. When you burn a CD from the files on an SD card, Does it burn an MP3 CD or is it Audio Format?

A: You can record from the Tascam SS-CDR250N in Wav or MP3 format.

Q: 8. Vendor/installer inserted a device (magna?) to route all components into a graphic equalizer, then out to speakers. That worked, but it introduced a faint flutter into the output. Even when all components, including the tuner/amp are powered down, if the 'magna' has power to it the flutter remains. The Rolls is said to eliminate flutter, not hum. Is that true? Is there a better device to use with the equalizer, designed for flutter as wells as hum? or just flutter?

A: The Rolls HE18 will only remove buzz and hum.

Q: 9. Is CD recording is the same as burning a CD?

A: In a traditional sense, burning a CD refers to the process of transferring file information stored on a drive onto a CD disk. CD recording, as a function of the Tascam SS-CDR250N Two-Channel Networking CD and Media Recorder, refers to writing information to a CD from an external input source connected to the Tascam.

Q: 10. Is it possible to record to CD and redundant SD cards at the same time?

A: Yes, when a recording option function with “BACKUP” is selected, simultaneous recording to multiple media is enabled. Here is a link to the user manual: https://tascam.com/downloads/products/tascam/ss-cdr250n_ss-r250n_rc-ss150/E_SS-CDR250N_OM_vB.pdf

Lance G	19/09/2024
[12.5 lb] I Used this amp to expand my RZ50 from 7.2.2 to 7.2.4 so now I can run 4 Atmos speakers and it sounds so much better. I was missing the back atmos now I have full 360 degree sound. This amp sounds great . I have it powering my klipsch RP-600M as my surround rear speakers plug into the RCA pre output. Then you take and wire your rear height/ atmos speakers into the surround rear speakers positive and negative post . Then when you set your speaker configurations to 7.2.4 it gives you a second height channel but takes away your rear surround and that’s why you use this 2 channel amp for your rear surrounds . 5

Sherly	13/09/2024
[12.5 lb] Hi Ken,I use there UG5140 model - http://www.bhphotovideo.com/c/product/1125062-REG/elasco_guards_heavy_duty_5000_series.htmlLid has buttons build into the mold - don't think is any other product like this on the market.Lid stays closed perfectly. 5

Satisfied Joe	01/09/2024
[13 lb / 5.9 kg] Used for running single wire. Only fits up to 1 in size but company has larger size channels. Believe is designed to be stepped on which is not a problem at all, and even drive carts over it with ease. 5

Matt	11/08/2024
[2] This is a great no-fuss amp - have it hooked into a Sonos Connect and I'm already thinking about adding another. Power management is easy and sound quality seems great! 5

Bill the Pilot	29/07/2024
[2] This product is worth every penny... It closes better than any other we have owned before. It is also the strongest one I've seen. We used it at a jobsite where we had Wheel Loaders weighing in at about 150,000#s and they did not waiver one bit. I will definitely by more and recommend them to everyone if they want value for their dollar. 5

Matthew	29/07/2024
[13 lb / 5.9 kg] Covers all my cables in my studio. No one trips. Cables are protected. Things look a lot neater and tidier. I win with this purchase. 5

Single Dad & Enginneering Designer	15/07/2024
[37.3 x 12 x 2"] We had a power outage after hours and our CMM (Computerized Mechanical Measurement) apparatus had a "hard shutdown", which corrupt a couple of programs and settings. We realized a standby power supply or UPS was needed but also surge protection on several of our expensive test equipment. The UPS has built in surge protection for the CMM, but it left our other equipment unprotected. Being in Arizona, the second most likely state after Florida for power surges caused by lightening. Researched surge protection available through our normal purchasing channels and found this one at a very reasonable price which was a bonus. Our company is very cost sensitive and watches every dollar. Now our Tensile/Pull Testers are protected against damaging line surges. 5

Aaron	16/06/2024
[12.5 lb] Using this in an Operations cell. Does the job. 5

Doug	12/06/2024
[12.5 lb] I primarily do sound location recording for film. A producer recently gifted me with five of these Elasco single-channel cable drop overs. He rarely used them, but I immediately started using them on every shoot to guard my audio cables and stingers. They easily snap together to make as long a run as you need. I recently was on a gig where I needed more, so I ordered five additional identical Elasco single-channel cable drop overs. Greatest benefit is obviously protecting the integrity and longevity of my cables and stingers from crew members walking on them, standing on them, and rolling carts and gear over them. Safety wise, this is a great preventative measure from people tripping over any of my cables. I rarely need to gaff tape cables down anymore which is a major financial savings. Just be sure to get the right width and height to fit your cable needs. The ED1050 Single-Channel is sufficient for two to three audio cables or two 12-gauge stingers. If you use larger diameter cables or run bundles of cable together, I'd recommend bumping up another size or two, just beware that the larger you go in height and width, the weight of each drop over goes up as well. No question it raises your perceived professionalism a notch or two with clients. Don't know how I made it so long without these. Highly recommended. 5

Dan	07/04/2024
[37.3 x 12 x 2"] Make sure you push lip of lid under base and lid then stays down. If you don't seal lid, that's when you may have closure problems. Works great for me. 5