[1.2 lb] This is the best light stabilization system that can support Red cameras, Arri Mini Alexa, BM 4.6k, Sony Fs7 or Dslr cameras with cage, heavy lenses and external battery, that is, with all its accessories together. It's better than the Ronin M, Ronin 1, Movi M5 and I tell you this because those teams are very heavy that need external arms, easyrigs or steadys to not tire after a few minutes. Apparently the resistant magnesium of the Helix, lightens all the equipment and its engines are powerful. I would put it a little less at the level of the Ronin 2 and Movi10 because those teams are already another type of similar systems and equally heavy, but popular. The Helix is quite portable and easy to calibrate on a flat surface. Always use the Helix application on your iPhone that simplifies everything, because entering through usb to basecam, that is very technical and complicated. Everything is connected through Wifi and Bluetooth. Do not buy the version with RC because I personally would not use it. It is a remote control that is purchased separately to move the Helix and I suppose it would be used to put the Helix on a car or drive it from a distance and I do not do that. If you are going to use movie cameras, make sure you have 3 batteries, because the Helix feeds the cameras through specific cables that are on your website. And also the same battery powers the follow focus through D-Tap. It has been a good buy.

[1.2 lb] I won this printer from XYZ Printing's Easter Giveaway on Facebook, and I couldn't be happier.� It's very easy to set up and use almost right out of the box.� It also comes with several sample prints to get you started right away.� Smaller prints only take a few minutes, but be prepared for the larger prints to take several hours, depending on size and complexity.� Overall, it's a very good printer if you are just getting into the 3D printing world like myself.� I will say, I'm definitely hooked.

[1.2 lb] I'm not using it for lighting or stage, but rather a ham radio antenna. I bought it specifically to use at the base of a mast pole that I needed to tilt over to where I could reach the top and do some work on it. Using this clamp and a pole pounded in the ground, I was able to tilt the top down without the base sliding away from me.

[14.8 V] Vary handy and convenient!!! Not rough or uncomfortable to use. Love that it has my favorite color. Accessory mount comes loose if not checked b4 use..I love it overall, for being my first rig attempt!!

[1.2 lb] Fits to the smaller pipework soundly. I have a round stud fitted to it so I can attache lights or mics in various venues.

[14.8 V] UPDATE- I HAVE UPGRADED TO LETUS 35 REGULAR SINCE I BOUGHT CANON C100 M2
BUT THIS WAS EQUALLY AWESOME STABILIZER.
It’s been almost one year since I bought this product. I was skeptical first since there aren't many reviews of this product and it is one of the most expensive camera stabilizers in the market.
Like, I said it'd been almost a year now, and I had an opportunity to use Letus Helix on plenty of wedding events...and the more I use it, the more I am falling in love with this gimbal. It's very easy to setup; you can set this on the ground quickly change lenses and adjust very quickly. Doesn't take too much of time to bring it back to balance. The encoder motors work great. I love the briefcase mode.
I mostly use Canon C100 M2, but this gimbal easily handles my C300 M2 with Canon 16-35L III lens or with the 24-70L lens.
I had to practice a little bit to get stable footage, but I had never used gimbal in my life, the learning curve for me was minimal, a couple of hours of good practice is good enough to start getting good footage.
I looked into purchasing another gimbal in the markets, but I like the form factor of this gimbal - holding at eye level has its advantage. Customer support is excellent. Overall, I am glad I purchased this product, I am pleased with it, and I am highly recommending to anyone looking to buy Letus Helix with encoder motor. It is one of the best gimbals in the market now.

[1.2 lb] It’s been almost one year since I bought this product. I was skeptical first since there aren't many reviews of this product and it is one of the most expensive camera stabilizers in the market.
Like, I said it'd been almost a year now, and I had an opportunity to use Letus Helix on plenty of wedding events...and the more I use it, the more I am falling in love with this gimbal. It's very easy to setup; you can set this on the ground quickly change lenses and adjust very quickly. Doesn't take too much of time to bring it back to balance. The encoder motors work great. I love the briefcase mode.
I mostly use Canon C100 M2, but this gimbal easily handles my C300 M2 with Canon 16-35L III lens or with the 24-70L lens.
I had to practice a little bit to get stable footage, but I had never used gimbal in my life, the learning curve for me was minimal, a couple of hours of good practice is good enough to start getting good footage.
I looked into purchasing another gimbal in the markets, but I like the form factor of this gimbal - holding at eye level has its advantage. Customer support is excellent. Overall, I am glad I purchased this product, I am pleased with it, and I am highly recommending to anyone looking to buy Letus Helix with encoder motor. It is one of the best gimbals in the market now.

[14.8 V] The quality looks good. Have not used them other than installing them to check for fit. Have other Global Truss equipment and very happy with it.

[1.2 lb] This is an amazing Rig. Being that it's a little less used than the movi or ronin, you need to find custom solutions for cabling when using a follow focus system. It is very stable once you get up and running and Letus now have a website for the rig (letushelix.com). It's very easy to balance and the weight centered on the lens so switching lenses is easy and requires a minor adjustment to the bottom plate. Must haves, Monitor Solution (Small HD 502), Follow Focus (Red Rock Micro Remote Focus). If you get all of these solutions you will spend about $ at the end of the day, but hey, can you run with an 85 mm lens on a glidecam and keep it in focus?

[1.2 lb] We have used 3 Helix units from Jr model to full size Magnesium models. Unlike ALL other gimbal systems, this one can be held easily at eye level and is lighter. It also does not need a stand like all other gimbal systems as well... You can just it down on a table or the ground and pick it right back up again. The design is GENIUS. As far as the previous review, I'm sorry they had trouble with it but there is a LOT of documentation on the website via manuals, FAQs and training videos! Software and firmware updates have made this gimbal rock solid and it has run PERFECTLY for us on every shoot.