The American DJ Fog Fury Jett RGBA LED Fog Machineis a high-velocity fog machine that uses red, green, blue, and amber LEDs to add color to blasts of fog over 25' in the air. The machine has a 0.8 gal tank that can be mounted in the front or rear of the unit so that it can be used vertically or horizontally. Fog output is 20,000 ft³/min and ADJ employs Electronic Thermo Sensing Technology to maintain constant temperature to avoid long warm-up times between blasts. A sensor inside the reservoir tank will cause an LED to flash when the level is low and, once it reaches a lower level, will automatically shut off the pump. The Fog Fury Jett has manual control and remote control via the included wireless remote. It also has five DMX channel modes (1, 2, 3, 5, and 7 channels), with controls available for fog, color mixing, and strobing.

Uses RGBA LEDs to Mix Color with Fog    Blasts Fog 25' High    Output: 20,000 ft³/min    5 x DMX Channel Modes: 1, 2, 3, 5, 7    Uses Water-Based Fog Fluid    Automatic Circuit-Cutoff When Fluid Low    Electronic Thermo Sensing Technology    4-Button Control Panel    Includes Wireless Remote    Carrying Handle

• 700W professional DMX vertical fog machine
• 12 x 3W RGBA LEDs (3 of each: red, green, blue, amber)
• High-performance pump for optimum output
• ADJ’s Electronic Thermo Sensing (ETS) technology
• Special heating element design that uses an oil-type transmission pipeline system to minimize the possibility of clogging
• 3 Operational modes: Manual, Remote Control, or DMX Controlled
• 5 DMX Channel Modes: 1, 2, 3, 5 or 7 channels
• 4-button control panel & LCD display on rear panel
• XLR 3-pin DMX input and output connections
• Convenient carrying handle
• Visible fog-fluid level indicator on rear
• LED in reservoir flashes when level is low and automatically turns off pump at a lower level
• Tank can be mounted to either front or rear so that the effect may be pointed up or down
• Only use high-quality, water-based fog fluid
• Safety Loop on board

Related Questions and Answers

Q: 1. Can the USA GF 920 karaoke player be connected to a pa amp system to increase the audio quality?

A: The Karaoke USA GF920 Multimedia Karaoke Machine has an RCA line output which could be used to connect to a PA system or mixer.

Q: 2. I am looking for object lens cover replacement for Nikon Travelite 8*25 and Zhumell 8*42. Which products should I look at?

A: It would be good to measure the actual size of the Objective lens to make sure these will fit. Or to try the kit, it is made for the 42mm size binoculars-(and make sure you keep the original packaging in case they don't fit, and you need to return them).

Q: 3. Do they fit Nikon Monarch binocular 10 x 36?

A: I think these will be too loose on 10x36 binoculars. They fit the Nikon monarch 5 8x42.

Q: 4. how do you replace the blade on this cutter?

A: This has a no touch blade, on the side of the cutter the part that you push up and down to cut paper there is a lever that you turn, the blade comes of in it's cartridge and you replace it with a new cartridge and you never have to touch it. The cartridge # is G-01 for straight blade and G-02 for perforating blade.

Q: 5. Will these fit Bushnell Trophy XLT Binocs, 10x42mm (Bone Collector Edition)?

A: Inner diameter is 2 1/16" AKA 52.38mm. Secure fit for Zeiss 10X40B/GA T*

Q: 6. Does this come with everything pictured?

A: The PMI SmokeGENIE Smoke Ninja Handheld Battery-Powered Wireless Mini Smoke Machine comes with the following items in the box: PMI SmokeGENIE Smoke Ninja Handheld Battery-Powered Wireless Mini Smoke Machine Smoke NINJA Device Wireless Remote Atomizing Smoke Chamber 100ml of Smoke Formula refill 4 x Precision Smoke-Shaping Nozzles Liquid Smoke Nozzle Jet Tip Nozzle USB-C Charging Cable 1/4" Mount Adapter Magnetic Mount Silicone Cap Protective Case Limited 1-Year Manufacturer Warranty

Q: 7. Will these fit the Nikon PROSTAFF 7S 8x42 binoculars?

A: Unfortunately no, they are only for Vortex brand binoculars. You should contact Nikon to obtain replacement caps since we do not sell replacements.

Q: 8. Will these fit Nikon Prostaff 5 8x42mm?

A: I can't confirm that these will fit a Nikon Prostaff and you won't really know until you have physically tried them yourself...BUT I suspect they will fit. I wanted something to put on the ends of my Zeiss 7X42 and 10X40 and got fed up going round shops trying to find the ideal things to stop myself from putting my fingers on the lens. I took the gamble hoping for the best I bought these lens caps and to my delight, they fit both of my binos well. They are rubber and thus flexible and fit well and snugly. I'm pleased I took the gamble.

Q: 9. Does this really have a magnetic guide? I cannot see it in the picture.

A: The Carl Green Machine Professional Rotary Trimmer (15" Cut Length) has an adjustable magnetic paper guide hold materials on a calibrated sturdy metal base board.

Q: 10. Will these fit Eagle Optics Ranger 8x42 binos?

A: Unfortunately no, they are only for Vortex brand binoculars. You should contact Eagle Optic's to obtain replacement caps since we do not sell replacements.