You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Genelec Glm User Kit Setup Guide

Genelec Glm User Kit Setup Guide
  • Product Code: eq176519
  • Availability: In Stock

$787.92 $1,189.76

The Genelec GLM User Kit Setup Guidefrom Genelec GLM User Kit Setup Guideis an accessory kit designed for Genelec's SAM Monitors. It helps you calibrate the monitors to the room for the most optimal frequency and phase response. This kit includes a GLM network adapter, a calibration microphone with a holder, and a USB cable.

You'll need this kit to enable GLM software with your SAM monitors. The network adapter will connect to your computer via the USB cable. Each SAM monitor in your possession can interface with the network adapter over an Ethernet cable, which is provided with your SAM monitor (available separately).

Calibrates SAM Monitors to Room    Includes GLM Network Adapter    Includes Calibration Mic & Mic Holder    Included USB Cable

Parameters
For Use withGenelec SAM Monitors
CompatibilityMac and Windows Computers
DimensionsNot Specified by Manufacturer
WeightNot Specified by Manufacturer
Packaging Info
Package Weight0.945 lb
Box Dimensions (LxWxH)9.7 x 4.85 x 2.3"

Related Questions and Answers

Q: 1. what is in the box? Do it include TD-3 Camera Tally Light and CB-3 20M Cable ?

A: Yes, it comes with 4 TD-3 lights, 4 CB-3 cables, 4 belt packs, and 4 headsets with mic.

Q: 2. Will this kit work with the Boltzen 55W lights right away or do I need to purchase the Bowens adapter for the light?

A: It comes ready with the bowens adapter.

Q: 3. Does it work on crane v2?

A: Yes, the Crane V2 has a tripod threading under it as well. You could use this with the Crane V2 and other products with a 1/4"-20 threading.

Q: 4. Does it exists a physical wired connection between the base station and the tranmitter or it is a wireless connection? Dr asok

A: It is a wired connection between a belt pack and a base station.

Q: 5. Do I need two of these if I want to switch back and forth on the handle tripod position or low profile shot?

A: If you want to use it with Weebill Lab, then yes, you need two of these. I'm surprised it is not mentioned anywhere. Theoretically, you need one quick release part and two pieces with threaded screw on top. But, of course, Zhiyun includes only one, just so you would have to buy a second quick release kit.

Q: 6. So this remote apparently communicates with the GLM network adapter - does the GLM software need to be actively running on the host computer to use this remote, or can the network adapter simply be powered (by USB I presume) with no GLM software running?

A: Yes, the Genelec 9101A Wireless Volume Control for GLM User Kit is capable of communicating with the GLM Network Adapter when the adapter is powered with a USB adapter as well as while it is connected to a computer over USB. Pages 69/70 of the GLM Operating Manual linked here provide more details: https://bit.ly/3wIhS8U

Q: 7. Will it unscrew with heavy accessory? I use a Ninja V attached with GyroVu Mini Quick Release Plate. It spins loose all the time.

A: If it is tightened down it should not spin loose no.

Q: 8. I see that two of these can be daisy chained together...does this increase the number of units that can be connected? What would you do for a team of 12 techs + the need for 1 to be wireless?

A: Yes it will increase the total number of users.

Q: 9. Is it possible to attach a grid to this?

A: No, there is not a grid/eggcrate made for that softbox.

Q: 10. Can two ITC-100's be daisy chained together?

A: Hi Kirk,Yes, you can daisy chain two ITC-100's together. Input 8 of the first ITC-100 can be connected to input 1 of the second ITC-100. Thanks!

14/09/2024

[0.945 lb] I run and operate a busy color suite in South Florida.As a full-time Colorist my first and only concern is helping my clients achieve their vision by making their film and video projects look color perfect.But.I recently wanted to add big theater sound. But - how to do that on a budget, and within the physical limitations of a medium size color suite. Enter Genelec.The 7040A Studio Subwoofer by Genelec is the perfect companion for the 8010's. Easy to set up. Easy to calibrate for your needs. I will always remember my first Genelec moment. As my client's movie trailer played on my color monitor - the 2.1 sound blew me across the room. Close your eyes and you won't believe that this kind of sound is coming out of speakers this small. The 7040A Studio Subwoofer is the key to it all. That - my friend - are the Pros.The Cons? Only one, I can think of: the dip switches. I'm used to volume controls - so it took a bit more fiddling around than I thought I would need to get the sound the way I wanted. The manuals for both speakers and Genelec's website come up short on the kind of help that I needed.It took a little time. But once I understood the dip switch ecosystem - I was good to go.That said - the 7040A Studio Subwoofer by Genelec is a great buy. And, combined with the 8010's - you have one POWERFUL 2.1 audio system. That. Should. Blow. You. Away.Best, Jim --------

5
12/09/2024

[0.945 lb] Perfect ever!

5
09/09/2024

[0.945 lb] I bought the 8010's to have some portability when traveling and producing electronic music. They have a roll off at 65 HZ, just where bass gets beefy. Considering the size of the 8010's they do an excellent job in the mid and high frequency range...but they seriously lack in the deep end. I have since supplemented them by adding the 7040A and the difference is astounding. Yes, this sub has weight to it, isn't exactly small and the idea of portability is somewhat limited now but I'd do what is necessary to bring this baby along for the ride. I'm talking fullness across the board when combined with the 8010's that could well stand up to my home studio near fields.

5
05/09/2024

[0.945 lb] I've been using Genelecs in my edit suite for over 23 years and I've never purchased a sub until recently. Mixing for broadcast, the sub is overkill, right? WRONG! It make mixes come alive and my clients love the added fullness.

5
28/08/2024

[0.945 lb] For being a small enough to seemingly hide under a desk, the whole room can accurately hear, and feel, lows in the studio sound system.

5
23/08/2024

[0.945 lb] I read an earlier edition years ago and finally decided to buy this one. Rather technical but this is what I like. The discussion of the history of lens designs and the schematics showing the lens designs is worth the cost of the book in itself. Everything from camera movements to loading film into film holders is covered. You cannot go wrong buying this book.

5
21/07/2024

[0.945 lb] I've been stuck in the KRK loop for about a decade now. This is my first pair of Genelecs and I am blown away! Sure, they don't have the low-end presence of larger speakers, but the clarity and separation is on a whole other level! I am hearing my favorite music in a new way through these monitors and I cannot wait to use them for critical listening in my own work as well. Every instrument feels like it has it's own space and I am noticing little delights that I have never noticed in my favorite music. What a dream!

5
18/07/2024

[0.945 lb] It's way smaller than I expected but sound amazingly great. It has good focused bass. I can imagine every instruments.

5
24/06/2024

[0.945 lb] Genelec room correction technology is very effective in optimizing my monitors to better sonically fit my home untreated and unoptimized rooms. Outside of the interface with my Genelec speakers (8330A and 8351B) while running the calibration, I have my two GLM kits permanently connected to my monitors and use the matching wireless remote to control the volume at the speakers (Genelec tells me it is the optimal set up for their SAM speakers - attenuation happens right before amplification). When feeding the speakers with a digital signal I get the most transparent and detailed presentation I was ever able to achieve in my home after 20+ years of equipment swapping, tweaking, modding and building... I use Roon to play muisic from my ripped CDs and Qobuz in my 2 home stereo systems. It makes for very minimal hi end systems. You could hide everything but the speakers if you desire...

5
22/06/2024

[0.945 lb] Excellent audio quality from a very tiny speaker.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Frio Cling Vacuum Pump Setup Guide

$179.97 $273.55

Arri Alexa 35 Ronin 2 Setup Guide

$2,610.00 $3,340.80

Ikan Homestream Kit #4 | Live Streaming Setup

$1,499.97 $1,979.96

Genelec 8381a Height Extension Kit White

$3,600.00 $4,968.00

Genelec 8381a Height Extension Kit Black

$3,600.00 $5,004.00

Products You May Like

Rosco Opti-sculpt 5-piece Design Kit 30°

$105.00 $158.55

Tiffen 67mm Ultra Contrast Filter

$239.97 $292.76

Best Reference Headphones For Mixing

$195.00 $265.20

Eylar 4-piece Aluminum Storage Trunk Set Gray

$2,009.97 $2,753.66

Lg Column Refrigerator And Freezer Set

$1,257.00 $1,797.51

Adonit Neo Lite Stylus - Graphite Black

$62.97 $97.60