Lighting designers and mobile DJs in search of a basic wash fixture will appreciate the high polish Odyssey Innovative Designs PAR 20 Aluminum Light Fixture, an ideal light for DJs and architectural applications such as lighting tables, backdrops, hallways, and similar areas for a color wash effect.

The fixture utilizes an E26/E27 medium-screw base, the same as a standard household fixture. An octagonal gel frame with a spring clip enables you to add any color gel to your application. The PAR 20 includes an AC power cord and a hanging yoke.

Great for DJ and Special Events    Great for Architectural Applications    Uses E26/E27 Medium-Screw Bulb Base    Includes Gel Frame with Easy Clip    Includes AC Cord and Hanging Yoke

• E26/E27 medium-screw bulb base (standard household base; lamp not included)
• Octagonal gel frame with easy, secure gel frame spring clip
• Includes AC cord and hanging yoke

Related Questions and Answers

Q: 1. how can I mount this on my camera, is BH sell that part?

A: It has a 1/4-20 threaded mount and you can use a variety of mounts. Here are two from Aladdin. Aladdin Shoe Mount with 1/4 -20 Screw B&H # AL02SHOE and the Aladdin Ball Head Clamp with 1/4-20 Screw for Eyelite, A-Lite or Bi-Flex1 B&H # ALFL40CLPPBH.

Q: 2. What is the width of the yoke? the exact dimensions?

A: Unfortunately we do not have this in stock to measure.

Q: 3. To speed setup, can the domes be set up then just put them on the stands and add the bulbs at a close location w big suv?

A: The softboxes in the Raya Octa Fluorescent 7-Socket Fixture 2-Light Softbox Kit can be attached to the light fixture in advance and placed on the stands when you are ready to shoot.

Q: 4. What 50 Watt CLF bulb can be used with this fixture? The Overview says it can handle 7 50 Watt CLF.

A: I have so far replaced one CFL bulb and found the matching 5000 Kelvin temp rating for it. Because of the heat output of the 7 lamps in the confined space of the light I would not exceed the total 350W rating of any combined bulbs, unless for brief periods, only - or in cold environments.

Q: 5. Can you make a glossy metal print for hanging on the Wall 20by 40. I can send u photo by diwnloafing

A: Yes. Just select glossy as the desired surface on the Aluminyze website and upload your photo.

Q: 6. Can this be used for flat lays?

A: Yes this light kit can be used to shoot flat lays.

Q: 7. How long does the battery last? Thanks!

A: It lasts 1.7 hours.

Q: 8. Is there a max wattage rating? per socket? total wattage? Are the sockets plastic or ceramic/porcelain? Will it accommodate a mix of different wattage bulbs?

A: No wattage rating is specified. The sockets are plastic. I wouldn't put anything but CFL's in them. The soft box would overheat if you use photo floods..

Q: 9. Can the light level be adjusted, or is it always on ?

A: The Raya Octa Fluorescent 7-Socket Fixture has dual rocker switches on their back panels, each of which control on/off function for 3 or 4 lamps allowing the creation of a light ratio. You can either turn one switch on to use 3 lamps, the other switch to use 4 lamps, or both switches to use all 7 lamps at once.

Q: 10. Does it come with any kind of diffusion filter?

A: No. Just the light and a lanyard. Maybe a charge cable, I can't remember (it's a simple micro USB charging jack, you probably already have such a cable) However, let it be known that the swatches from a Lee or Rosco gel swatchbook fit this light perfectly, so attach whichever diffusion you like with a bit of clear double stick tape. However, It's such a physically small source, diffusion the same size of the unit is not really going to soften the light noticeably, for that you would need a larger piece of diffusion. Still, since I use this eyelight for just a bit of, yes, eyelight sparkle, I find that diffusion is Not needed as long as the light is kept on axis with the lens, where sharp shadows don't give it away. Hope this helps.