Giving you 2 passive channels for stereo or dual mono DI applications, the Radial JDI Stereo Passive Direct Boxfrom Radial JDI Stereo Passive Direct Boxfeatures Jensen transformers that balance your signal and lower its impedance for driving long cables. The unit boasts a flat frequency response from 10 Hz to 40 kHz, allowing the natural sound of your instrument to be unchanged. Each channel has a -15 dB selectable pad, along with transformer-isolated inputs and outputs, to help reduce noise. Interference is further reduced thanks to its internal Faraday shield. The JDI Stereo's 14-gauge steel construction allows the box to be just as suited for the stage as the studio.

Equipped with Jensen Transformers    -15 dB Pad Per Channel    Flat Frequency Response    Transformer-Isolated I/O    14-Gauge Steel Construction    Internal Faraday Shield

Jensen transformer-equipped passive DI

Eliminates hum and buzz from ground loops

Virtually zero phase & harmonic distortion

Compact stereo format

Related Questions and Answers

Q: 1. How's the SL-1210GR2 different from the SL-1210GR?

A: The main upgrade to the Technics SL-1210GR2 Direct Drive Turntable System II (Black) is the improved motor. Aside from that, it is mostly similar to the SL-1210GR.

Q: 2. Can this accept mic level signals on XLR inputs 1&2? I want to use this on my mixer end for two mic signals to line level inputs

A: No. The ART Dual RDB Dual Re-Amping Direct Box accepts line level input only, as it does not include any mic preamps. The Dual RDB outputs mic level or instrument level audio signal. You could use a device like the Rolls MX310 MorMics 3-Channel Mic Mixer/Combiner (B&H # ROMX310), which will allow you to connect up to three XLR microphones and it has a single XLR output that is switchable for mic level or line level output.

Q: 3. Will this fit a 21.5 late model 2013 monitor

A: No, the base is no longer removable on models newer then 2011. You will need to use this a href= https://www.bhphotovideo.com/c/product/1338461-REG/tether_tools_vadpt07_rock_solid_vesa_imac_display.html target= _blank https://www.bhphotovideo.com/c/product/1338461-REG/tether_tools_vadpt07_rock_solid_vesa_imac_display.html/a

Q: 4. Could this unit be used to split clearcom or rts units?

A: This unit is meant to split audio only, and is wired differently than communication systems. We do carry a splitter for RTS, which is the Telex TW-5W 1 In, 5 Out Splitter Box, B&H # TETW5W.

Q: 5. I have a landline with a chord, but I use a wireless headset quite often. Will this device pitch up recordings of conversations on my wireless headset?

A: The connector will only work while you're using the wired phone headset.

Q: 6. What type of connecting cable does the Tascam RC-20 Remote need when used with the SS-R200? Thank you!

A: The Tascam RC-20 remote connects to the SS-R200 via a 2.5mm TRS cable. (12.8 feet cable included with RC-20).

Q: 7. Can I hook it up directly to FIOS box?

A: If you FIOS box has a standard phone jack on it I would think it would work. I do not have a FIOS box so I can't say for 100%

Q: 8. Can the mixer be used with a tentacle sync device?

A: It depends on what type of device you will be using the Kopul CMCS-1 Passive 3.5mm Microphone Combiner/Splitter with and whether or not it accepts timecode.

Q: 9. Does it pass along 3V plug-in power from the camera to run a lavalier?

A: Yes. Power is passed thru; photos show a lavalier mic connected, which would confirm this.

Q: 10. What diffusion is included with this product? Description says "The front diffuser is removable" but doesn't say what it is.

A: The manufacture TRP World wide dose not list the specifics on the front panel that is included with the TRP WORLDWIDE Direct Fit Snapbag for Aputure Nova 600C. Most front panels on softboxes made for LED are about a 1/2 stop.