The black PortaBrace RIG-FS7XT Case for Sony PXW-FS7 Blackfrom PortaBrace RIG-FS7XT Case for Sony PXW-FS7 Blackis a lightweight camera case with interior kit designed for the Sony FS7 camera with a viewfinder and lens attached. The extra-tall 13.5" interior height allows for a baseplate at the bottom of the camera, while accommodating the top handle and microphone shockmount. The rigid frame is virtually crush-proof, and the soft padded interior comes complete with accessory items including a camera tie-down cinch and camera cradle, to ensure that your gear is safe and secure during transport. Additional accessories include 4" and 7" padded lens cups to organize and protect extra lenses, a padded accessory pouch, a pouch for an 8 x 12" iPad or tablet, white balance card, and flashlight-carabiner.

The case is made from rugged 1000-denier Cordura, and features 1" thick padding surrounding a hollow-core plastic frame. The bottom is bolstered by a layer of waterproof anti-skid rubber. The main compartment is accessed via YKK zippers, and a secure hook-and-loop-fastener strip along the front flap helps prevent water and debris from entering the case. The case can be carried by two suede leather carry handles, or a comfortable suede-leather shoulder strap.

Accommodates Attached Viewfinder & Lens    1000-Denier Cordura Exterior    1" Padding Around Hollow-Core Plastic    13.5" Interior Height    Waterproof Rubbered Bottom Layer    Two Side Exterior Pockets    Suede Carry Handles & Shoulder Strap    Nine Interior Accessories Included

Keep viewfinder and lens attached during transport

Lightweight rigid frame construction

Durable, abrasion-resistant 1000-denier Cordura material

1" thick interior padding surrounding a hollow-core plastic frame

Two side exterior pockets

Nine interior accessories to organize and protect camera and gear

Related Questions and Answers

Q: 1. I was at the 2015 NAB Show, and I'm almost certain I saw one of these with a Canon C100 Mark II mounted on it. Is that possible? Is there an additional plate needed for that? I don't remember seeing one, but just wanted to make sure before I pursued purchasing one of these.

A: The SHAPE Sony FS7 Bundle Rig with Follow Focus is specifically for the FS7. If you mounted a C100 Mark II on it, it would be missing a right handle arm. See below for a suggested SHAPE rig for the C Series.You might have seen this rig for the C300. It is made by Zacuto. It is a very nicely tricked out rig that will also work with the C100.

Q: 2. Can the large size be a carry on for flights?

A: Yes, this is carry-on compliant.

Q: 3. So can you keep the side handle mounted on the FX6 with this bag?

A: Yes, you can keep the side handle mounted on the FX6 with this bag.

Q: 4. I am using the FS7m2 with the 18-105mm zoom in front, and the small inboard batteries in back, so there is a lot of weight forward. I would like the camera to balance on my shoulder. Of all the shoulder/tripod rigs, which one will allow you to move the shoulder plate the farthest forward?

A: The rigs that are specifically designed to do what you ask are the ones made by Zacuto marketed as the recoil. It will get the camera back so that you have balance. Zacuto Sony FS7 Recoil Rig B&H # ZAZS7RV2. Another way to achieve balance is have a v-mount or gold mount battery in the back. Core SWX V-Mount Kit for Sony FS7: V-Mount Adapter, Two 98Wh HyperCores, Two-Position Charger B&H # COGPSFS7VMHK (B&H Kit)

Q: 5. Is this the case for the Sony HXR-NX80 4K NXCAM?

A: The NX80 have very similar dimensions to the PXW-X70. The NX80 will fit in this case as well.

Q: 6. The specs say the bag's interior dimensions are 11.8 x 11.8 x 22.2 Is the 22.2 the length?

A: Yes. I use mine to house a Canon 200mm f2.0 lens; and the 22 is the length needed to comfortably house the lens.

Q: 7. Can I use this bag as a carry on for an airplane?

A: The carry on size varies per airline so it pays to check with the one you are flying on. Currently we are following the size given by Delta and American: 22 x 14 x 9 inches / 23 x 36 x 56 centimeters (including handles and wheels) Unfortunately, the Porta Brace RIG-C100IIC is too big with an exterior dimension of 24.0 x 13.5 x 15.0 (60.96 x 34.29 x 38.10 cm). The Porta Brace CS-DC3R Digital Camera Carrying Case (Black with Copper String) B&H # POCSDC3R the Sachtler Camporter Camera Bag (Small) B&H # SACABS and the camRade CB Single 1 camBag B&H # CACBS1 are possible alternatives.

Q: 8. can it easily hold a C200 with lens, shotgun mic and headphones?

A: Yes it can.

Q: 9. Does this power the PXW FS5 mk 2?

A: YES IT WILL POWER UP THE PXW FS5 mk 2

Q: 10. Will a canon C300 Mark ll with top handle on fit ?

A: This bag is big. The C300 Mark II is about 11 tall with the top monitor unit in place. The height of the bag inside is about 15 . Plenty of room.