Hikvision Cb130 Conduit Base For Security Cameras

Product Code: eq176641
Availability: In Stock

$41.85 $58.17

Qty

16 reviews Write a review

Description
Reviews (16)

The Hikvision CB130 Conduit Base for Security Camerasfrom Hikvision CB130 Conduit Base for Security Camerasis designed to be used with the Hikvision DS-2CD22x2-I5, DS-2CD26x2F-S, and DS-2CE15C2N-VFIR3 bullet cameras. This aluminum alloy conduit box allows you to run cables through conduit poles and provides a secure, waterproof design.

For Hikvision DS-2CD22x2-I5, DS-2CD26x2F-I, and DS-2CE15C2N-VFIR3 Bullet Cameras

Parameters
Cable Routing	0.75" / 19.1 mm Opening with G3/4 Thread
Load Capacity	11 lb / 5 kg
General
Materials	Aluminum
Dimensions	41.3 x 14.2" / 105 x 36 cm
Weight	7.58 oz / 215 g
Packaging Info
Package Weight	0.55 lb
Box Dimensions (LxWxH)	4.85 x 4.8 x 2.45"

Aluminum alloy material with surface spray treatment

Better waterproof design

Related Questions and Answers

Q: 1. Can i use any p tap charger (like the one of another v mount) ? Thanks!!

A: Yes

Q: 2. Will this unit work via dtap with the original bmpcc?

A: The original BMPCC used the Blackmagic Design Pocket Cinema Camera Battery (BH# BLPCCB) so this kit would not be compatible.

Q: 3. Do the USB Ports support power delivery for the A7siii's USB C port?

A: yes it does. however with this product it is best to use the dummy battery. Anton Bauer P-Tap to NP-FZ100 Regulated 7.4V Dummy Battery for Sony a9/a7R III BH #ANPS7RDNZ1B • MFR #8075-0318 When you use a USB cable with your A7S III it will reduce the discharge rate of your battery but eventually the battery will die. Using the dummy battery above allows you to power the camera from the Anton Bauer Battery instead of relying on the internal battery for power.

Q: 4. Is this battery base providing isolated power to different P-taps so there is no ground loop issue?

A: Yes.

Q: 5. Can this power the SmallHD Focus 7? If so, what cable do I need?

A: You will need a D-Tap to L-Series Dummy Battery Cable. https://www.bhphotovideo.com/c/product/1437324-REG/smallhd_pwr_adp_sonyl_dtap_d_tap_to_sony_l_series.html

Q: 6. Will this work with the bmpcc 6k pro?

A: Yes, The Anton Bauer Titon Base Kit will work with the BMPCC 6K Pro

Q: 7. Is there any other compatible quick-release plate that has both the 1/4" and 3/8" screws for Komodo to prevent twisting?

A: Unfortunately there is no other quick-release plate that has both the 1/4" and 3/8" screws for the RED Komodo that is compatible with the Anton Bauer Titon Base Battery.

Q: 8. If I wanted to power A7siii and Ninja V (or similar monitor like a Shinobi 7 inch) how long would I get out of that combination (I am not a mathematician!). I understand not using the USB-C as its not powerful enough, using Dummy Battery?

A: You should get somewhere 4-6 hours or more with a a7S III and Ninja V with the Anton Bauer 68Wh Titon Base Battery.

Q: 9. Hi! Can this power the SmallHD Focus 5? If so, what cable do I need?

A: Yes it can. You will need a dummy L series to D-tap cable like this one SmallHD D-Tap to L-Series Dummy Battery Cable (32") BH #SMDTSLFB • MFR #PWR-ADP-SONYL-DTAP

Q: 10. "Will this work for the red Komodo?" Is it just a cable/connection issue or a voltage/amp issue?

A: Yes, the Anton Bauer Titon Base Kit Battery will work with the RED Komodo. The cable/connection and voltage/amp requirements need to be met. Since the output voltage is 14.4V, all you need is a D-tap to 2-pin LEMO cable.

David	18/09/2024
[Aluminum] perfect fit for my HikVision cameras. Should do a good job of keeping water and dust out of the connection and it provides a sturdy mount. I wish the gasket on the outer edge was glued in though, the installation would be much smoother if it were. 5

Nathaniel	17/09/2024
[Aluminum] Easy to use. Quality materials. Water tight. FYI included connector does not fit any standard PVC conduit, however, it is standard 3/4 threads allowing for easy installation of PVC connector. 5

Peter	05/09/2024
[Aluminum] A very solidly constructed metal product that includes a Liquidtight waterproof gland. I got this unit because I wanted to ceiling-mount one of my Hikvision HS-2DE2A404IW mini PTZ cameras. Currently B&H only lists the compatible wall mount, but not this one. I called Hikvision directly to verify that this is the item to use for ceiling mounts if you need a J-box. 5

Oytun	29/08/2024
[0.55 lb] I installed over a hundred of these brackets. they always came with the necessary hardware. I don't like the conduit adapter it comes with. it is useless. bracket is cast aluminum. it comes with a gasket to seal between the camera and the bracket, the gasket is either black or white (that's a gamble) the wall side of the bracket is coated with some sort of a foam material to seal uneven mounting surface. 5

Kannon	29/08/2024
[0.55 lb] Excellent conduit box. Much improved over the old version that wasn't very waterproof. This box is however its well sealed there's a gasket around the whole cover and grommet around the wire hole with a foam around the whole base where the camera screws in for a tight seal. Also there's convenient hook and wire to hang the camera and cover off to the side so you can plug it in. 5

Jose Antonio	17/08/2024
[Aluminum] I love it I used for outside to protect the camera cable Easy installation, fits (turret cameras) 5

Will	14/08/2024
[0.55 lb] Well made item as is the majority of the items Hikvision carrys or manufacturers. You are looking for a back plate mount for their cameras. Stick with their line of products. 5