The 100' 8-Channel LC Single-Mode Fiber Tactical Snake Cable from Camplex is a ruggedized and lightweight multi-channel fiber optic cable designed for multiple deployments for field production in outside broadcast, rental houses, and more. It is a highly flexible, tight-buffered tactical cable with internal aramid strength members for crush resistance in high-traffic areas and a polyurethane outer sheath designed to withstand crushing by both military tanks and outside broadcast vehicles. All assemblies are multi-stage, machine polished and tested for <-55 dB RL with test results for each channel supplied with this cable.

Exceeds MIL-PRF-85045 Specifications    Helically Stranded Cable Core    For Outside Broadcast & Industrial    Crush Resistant

Related Questions and Answers

Q: 1. Can I create my own preset and store it in this interface and use it without running the app on my iOS or macOS?

A: There are 5 Presets which are built in to the Motiv MVi, no need for the App. Five built-in DSP preset modes (Speech, Singing, Flat, Acoustic Instrument, and Loud) While in a PreSet, it is possible to tweak it to your liking, HOWEVER, when you exit the Preset, that PreSet reverts back to the "Factory" preset parameters You may also "tweak" settings on the Compression or EQ as needed. On your phone, the App may be used to store your own PreSets (100+) and name them and also control the Motiv MVi. In this scenario, you would need to run the App to recall your PreSets...

Q: 2. Would this charge the larger AG-VBR89G batteries? It does seem as if the VW-VBD58 is the same as the AG-VBR59. I don't know the difference but hopefully since it charges the smaller battery, hopefully it would also charge the larger capacity as well.

A: The IDX System Technology LC-2A Two-Channel Charger for 7.4V Canon, Panasonic & Sony Batteries (B&H# IDLC2A) is not designed to charge the Panasonic 7.28V 65Wh Lithium-Ion Battery for DVX200 (8850mAh) (B&H# PAAGVBR89) properly. Please use the Panasonic Battery Charger for AG-VBR & Other Batteries (B&H# PAAGBRD50P) for that purpose: https://bhpho.to/3OJl242

Q: 3. How much time is a 100ft?

A: At 24 fps, it will last a little under three minutes.

Q: 4. Is there any advantage in buying this charger over the Watson Charger (BH #WADSOLM) other than the included battery plates (which are only $1.99 each with Watson)? Is it a better charger for battery health and longevity?

A: Both are great options, this model happens to come with the added convenience of the included battery plates. However the Watson Duo is a very nice choice as well.

Q: 5. What is the lightning cable needed to use with an iOS device? Lightning to micro-USB?

A: The Shure AMV-LTG Lightning Cable (B&H # SHAMVLTG) is the compatible Lightning to micro-USB cable for use with the Shure MOTIV MVI Single-Channel USB Audio Interface to connect an iOS device.

Q: 6. Does this come with the travel case?

A: no this does not come with a travel case

Q: 7. Will the Shure MOTIV MVi interface retain the last panel settings (volume / mode / mute) when it is disconnect & reconnected? What happens when you unplug it from one computer & plug the USB into another?

A: There is no internal battery, therefore settings would not be saved once power is disconnected.

Q: 8. What is the brand and model microphone and headphone included in the bundle?

A: The Kit include a Shure PGA58 Dynamic Mic with 15' XLR to XLR cable and Shure SRH240A Professional Headphones. It appears as though the configuration buttons on our website are reversed, but this is the link to the Kit: https://www.bhphotovideo.com/c/product/1560690-REG/shure_motiv_mvi_digital_recording.html

Q: 9. Can I use this to convert output from a BLX to USB?

A: Yes, you can send the XLR or 1/4" output from the BLX receiver to the input on the MOTIV MVi, just as you would connect a wired mic or instrument.

Q: 10. Can the PS - 1A work with an Li-polymer 9V like Ipowerus instead of an Alkaline 9V ?

A: Thank you for your question. This unit will only work properly with a Alkaline or NiMH battery,.