Da-Lite 24706Blsi Tensioned Advantage Electrol Screen 54X96

Da-lite 24706blsi Tensioned Advantage Electrol Screen 54x96

Product Code: eq176653
Availability: In Stock

$3,000.00 $4,620.00

Qty

15 reviews Write a review

Description
Reviews (15)

Designed to eliminate the extra step of finishing the screen with trim, the 120V Da-Lite 24706BLSI Tensioned Advantage Electrol Screen 54x96from Da-Lite 24706BLSI Tensioned Advantage Electrol Screen 54x96is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Da-Lite 24706BLSI Tensioned Advantage Electrol Screen 54x96This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24706FLSI.

110" Diagonal / 16:9 Aspect Ratio HD Progressive 1.3 Screen Surface 1.3 Gain / 150° Viewing Angle Slim-Tab Tensioning System White Powder-Coated Case Installs Above the Ceiling Black Backing Standard Box Only (No Screen Fabric) Silent Motor Video Projector Interface

Key Specs
Front/Rear Projection	Front
Aspect Ratio	16:9
Diagonal	110.0" / 279.4 cm
Gain	1.3
Tensioned	Yes
Type
Series	Tensioned Advantage Electrol
Front/Rear Projection	Front
Aspect Ratio	16:9
Style	Ceiling-Recessed, Wall and Ceiling
Dimensions
Viewing Area	54.0 x 96.0" / 137.2 x 243.8 cm
Diagonal	110.0" / 279.4 cm
Surface
Finish Name	HD Progressive 1.3
Gain	1.3
Viewing Angle	150 degrees
Tensioned	Yes
Black Backing	Yes
Controls
Motor	Quiet
Low Voltage Control	Yes
Casing
Length	113.0" / 287.0 cm
General
Voltage	120 VAC/60 Hz

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

Smooth Roll Technology to keep your screen flat
Slim-Tab, a lower profile and stronger tab design to keep your screen taut
Tensioning Cable System to prevent warping and ensure even lateral tension

UL Plenum rated case
White powder-coated case for a clean aesthetic
Black-backed screen material for enhanced image quality and opacity
Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. What is the total weight of the whole kit and the length of the bags?

A: We only have the spec including the retail box, 22lbs.

Q: 2. Is this light moonlight? I mean it has battery powered can I use it without plug it in power outlet...? Like for outdoors

A: You may be able to purchase an external power pack for these lights but this kit as it comes requiresyou to plug it in to a power outlet.

Q: 3. Can I use this in Australia as it is a different voltage?

A: This product's electrical spec is :Multi voltage, 90-260VAC It will work anywhere in the world with a power supply within this voltage. However if purchased from a US dealer, you may need to add an adapter to the main power supply cord to match your outlet.

Q: 4. I want to use this with my Phase One 645. What is the fastest sync speed, and will it fire my Nikon Odin II receivers? I wish there was an adaptor that could allow me to simply use my Phottix Nikon Odin II transmitter.

A: The trigger does not support High Speed Sync. The sync speed you can get from the Phase One 645 is 1/125. The trigger does work with the Nikon Odin II receivers but in manual only.

Q: 5. Can you use any transmitter and receiver with this light? I have a transmitter and three receivers that fit on my camera flashes.

A: There is a place to plug one in but the beauty is the integrated sync. When you can buy the EL sky port transmitter and as you buy more they all sync up! So nice! Love these lights!

Q: 6. Specs read: Maximum Power 25 to 400 Ws; Does this mean that the minimum power is 25w/s & the maximum is 400w/s?

A: Yes Maximum power on this lights are 400Ws and minimum is 25Ws

Q: 7. Will D-Lite RX 4/4 work with Nikon D7500 and Sony A7?

A: Only with the dedicated Transmitters for each particular brand

Q: 8. Can the power output be controlled remotely? I want to mount this about ten feet high so I don't want to have to lower it to adjust the output.

A: Yes, the power can be controlled by the Skyport Transmitter.

Q: 9. is there included pre installed disk drives?

A: No, the Asustor Drivestor 2 Lite 2-Bay NAS Enclosure does not include pre-installed disk drives.

Q: 10. If used for zoom ring, does it have zoom speeds changes?

A: The motor of the SmallRig Wireless Follow Focus Lite Kit will react with the speed in which the control wheel on the handwheel controller is spun. In other words, the motor will spin the zoom ring as fast or slow as you spin the control wheel.

Gab Laughin	17/09/2024
[Yes] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projector up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem! 5

Gab Laughin	19/08/2024
[Front] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projection screen/case up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem! 5

Cat5 King	16/08/2024
[120 VAC/60 Hz] This screen was installed in a small conference room with an NEC projector. The screen can be wall or ceiling mounted, and this flexibility came in handy when we had to switch to a ceiling mount at the last moment. The screen presents very well, and is unobtrusive when retracted. The tensioning system works nicely, and we didn't have to change any of the factory settings for the drop. I would have liked to see some additional mounting holes for attaching the screen to studs in the wall, so the installer has more options for wall mounting. 5

Rikilah	11/08/2024
[Quiet] This Screen was easy to install. It took 3 people and 2 ladders to get the job done. The remote is really not needed but i opted to install it as well. The motor runs really smooth. The screen is nice and wide. A really good buy. 5

TC-DC	21/07/2024
[120 VAC/60 Hz] We used the screen at our annual and special town meeting and found that it was better than anticipated. the powerpoints were projected so all could see no matter where they sat at our meeting. I couldn't be happier and worth the price. 5

Chip	17/07/2024
[16:9] We use the screen in our church sanctuary once or twice a month. Installing it was an adventure with the weight and length, but several sections of scaffolding and a couple friends made the install move along nicely. The instructions for wiring were right on and it worked first try! The image is right on and visible the entire length of our viewing area (over 100'). 5

Andreas the squint	02/07/2024
[1.3] I used this screen in a small conference room and it was very simple to instal. 5

anyonymous	15/06/2024
[120 VAC/60 Hz] The screen was simple to mount (we used lag bolts and attached the screen to a wall.) The screen did not come with instructions on how to install the switch for a 120v motor...complicated the electrical install was inconsistent wire colors on the switch and the screen. After consulting an electrician and enduring his derision for working with this product - he correctly intuited the correct wiring configuration. A big thanks to the customer service at B&H. We ordered the screen 2 weeks from a graduation. The shipper lost the screen for nearly a week, without informing us. I contacted the shipper, who responded with a long distance shoulder shrug - explaining they would look for it again. Unable to motivate the shipper, I called B&H - they got involved, and the screen was in my driveway 36 hours later. Thanks B&H. 5

Enzo	03/06/2024
[150 degrees] Assembly for very straight forward. Looks great on the wall. Really like the velour wrap around the frame. It does a very good job of rejecting light back onto the screen. Because of the size, (110 inch) I decided to put up a folding screen to cover it when not in use. 5

Peter	13/05/2024
[Front] After correspondence with B&H on product lines and availability , I selected the cinema contour to marry up with the projector specifications that were needed. It also worked well with the acoustic demands of the in wall speakers hidden behind it . The result was spot on. Excellent price coupled with exceptional performance. B&H got the job done. Pro service for pro contractors. 5