Designed to eliminate the extra step of finishing the screen with trim, the 120V Da-Lite 24714BLS Tensioned Advantage Electrol Motorized Screenfrom Da-Lite 24714BLS Tensioned Advantage Electrol Motorized Screenis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Da-Lite 24714BLS Tensioned Advantage Electrol Motorized ScreenThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24714FLS.

123" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Can this be mounted on a Church wall and can it be operated more than 20ft away with extended cable?

A: That should be possible. Varizoom has both 50 and 100 foot extensions cables that are compatible with this system. 50 Feet: https://bhpho.to/2Jc1iDl 100 Feet: https://bhpho.to/2vFSbHT

Q: 2. Will this unit work a Nikon D780?

A: It will not. This gimbal cannot handle a DSLR the size of the D780

Q: 3. Can this unit be adapter to a wireless controller or is there a next step up that would not brak the bank?

A: I would think that it would take quite a bit of work to make it work wirelessly. There are 2 cables that it uses. One for the pan motor & the other for the tilt motor. They send a varying voltage to the motors to control the speed they move the cameras.

Q: 4. What is a good case to store the Moza Mini-P?

A: The Moza Mini-P comes with an EPP Bag. There is no dedicated bag for the Moza Mini-P but sling bags seem to be a good option.

Q: 5. Will this work with the Go Pro Hero 10?

A: Although there is no control listed with the GoPro Hero 10, a GoPro Hero 10 can be mounted to the camera carriage of the Moza Mini P gimbal with a tripod adapter. Example is Revo Tripod Adapter with 1/4"-20 for GoPro B&H # RETPMGP MFR # AC-TM. https://bhpho.to/3mTWMyF

Q: 6. Will this work with the Sony ZV-E10?

A: Yes, the Moza Mini-P Gimbal will work with the Sony ZV-E10.

Q: 7. Will this be compatible with canon powershot sx740hs and/or Fujifilm X-E3 with a small prime?

A: This gimbal has a payload of 2lb. A Canon Powershot camera should work well on this gimbal however a Fujifilm X-E3 is pushing it to the limit. Depending on the lens that you intend to use it is very easy to reach or overshoot the 2lb limitation. Not to mention that the X-E3 is physically larger than most point and shoot cameras which will make it more challenging to balance on this gimbal as it is designed with smaller cameras in mind.

Q: 8. Will this work well with smartphone that has an ultra wide lens like the newest iPhone? It looks like the motor will not be frame because it’s to the side but I wanted to confirm this.

A: While you will be able to mount a Smartphone to this gimbal and balance it, the new ultra wide lenses on some smart phones are so wide that they show the gimbal in the shot.

Q: 9. Is there a replacement power cord that can be purchased ?

A: We do not currently carry a power cord that may be purchased separately for this product at this time.

Q: 10. How do you control the Panasonic ZS-100 with the gimbal controls? I understand any gimbal will balance the camera that meets the weight requirements.

A: The gimbal does not provide camera control.