Da-Lite 24706Fls Motorized Ceiling-Recessed Screen 54X96

Da-lite 24706fls Motorized Ceiling-recessed Screen 54x96

Product Code: eq176656
Availability: In Stock

$14,199.00 $20,162.58

Qty

13 reviews Write a review

Description
Reviews (13)

Designed to eliminate the extra step of finishing the screen with trim, the 120V Da-Lite 24706FLS Motorized Ceiling-Recessed Screen 54x96from Da-Lite 24706FLS Motorized Ceiling-Recessed Screen 54x96is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Da-Lite 24706FLS Motorized Ceiling-Recessed Screen 54x96This screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24706BLS.

110" Diagonal / 16:9 Aspect Ratio HD Progressive 1.3 Screen Surface 1.3 Gain / 150° Viewing Angle Slim-Tab Tensioning System White Powder-Coated Case Installs Above the Ceiling Black Backing Standard Fabric, Roller, Motor Only Silent Motor Low Voltage Control (LVC)

Key Specs
Front/Rear Projection	Front
Motor	Quiet
Viewing Area	54.0 x 96.0 (110)" / 137.2 x 243.8 (279.4) cm
Aspect Ratio	16:9
Gain	1.3
Tensioned	Yes
Type
Front/Rear Projection	Front
Style	Ceiling-Recessed, Wall and Ceiling
Motor	Quiet
Surface
Viewing Area	54.0 x 96.0 (110)" / 137.2 x 243.8 (279.4) cm
Aspect Ratio	16:9
Finish Name	HD Progressive 1.3
Gain	1.3
Viewing Angle	150 degrees
Tensioned	Yes
General
Height Adjustable	Yes
Low Voltage Control	Yes
Voltage	120 VAC/60 Hz

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

Smooth Roll Technology to keep your screen flat
Slim-Tab, a lower profile and stronger tab design to keep your screen taut
Tensioning Cable System to prevent warping and ensure even lateral tension

UL Plenum rated case
White powder-coated case for a clean aesthetic
Black-backed screen material for enhanced image quality and opacity
Seamless surface

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Will this work well with smartphone that has an ultra wide lens like the newest iPhone? It looks like the motor will not be frame because it’s to the side but I wanted to confirm this.

A: While you will be able to mount a Smartphone to this gimbal and balance it, the new ultra wide lenses on some smart phones are so wide that they show the gimbal in the shot.

Q: 2. Can this unit be adapter to a wireless controller or is there a next step up that would not brak the bank?

A: I would think that it would take quite a bit of work to make it work wirelessly. There are 2 cables that it uses. One for the pan motor & the other for the tilt motor. They send a varying voltage to the motors to control the speed they move the cameras.

Q: 3. How do you control the Panasonic ZS-100 with the gimbal controls? I understand any gimbal will balance the camera that meets the weight requirements.

A: The gimbal does not provide camera control.

Q: 4. Will this work with the Sony ZV-E10?

A: Yes, the Moza Mini-P Gimbal will work with the Sony ZV-E10.

Q: 5. It looks like it requires a cable for each motor. Are there extension cables available?

A: Varizoom offers these extension cables. 10'-VariZoom VZ-EXTL10 Extension Cable B&H # VAVZEXTL10 20'-VariZoom VZ-EXTL20 Extension Cable B&H # VAVZEXTL2050'-VariZoom VZ-EXTL50 Extension Cable B&H # VAVZEXTL50100'-VariZoom VZEXTL100 100' LANC Extension Cable B&H # VAVZEXTL100

Q: 6. Will this softbox work with an optical trigger? Since the flash is enclosed I was not sure if it would prevent the transmission of the signal from camera to flash.

A: Honest answer is: I don't know. I use the 10m(33ft) cord that Syl Arena recommends. It allows you to control the OCF from the camera's menus. Don't use a curly one, you will pull the light stand over!

Q: 7. Can it work with Canon Camcorders like the vixia HF R80/R800? Also Canon EOS T6?

A: There should be no issues using the stated cameras on this gimbal.

Q: 8. Will it work with Samsung Galaxy S21 Ultra?

A: The Mini-P supports phones up to 3.48" in width, and will accommodate the Galaxy S21 Ultra (3" width).

Q: 9. Will this be compatible with canon powershot sx740hs and/or Fujifilm X-E3 with a small prime?

A: This gimbal has a payload of 2lb. A Canon Powershot camera should work well on this gimbal however a Fujifilm X-E3 is pushing it to the limit. Depending on the lens that you intend to use it is very easy to reach or overshoot the 2lb limitation. Not to mention that the X-E3 is physically larger than most point and shoot cameras which will make it more challenging to balance on this gimbal as it is designed with smaller cameras in mind.

Q: 10. Can I use with Amaran COB 60d?

A: The Aputure Light Storm LS 60x Bi-Color LED Light BH #APLS60X does not have an umbrella port so it cannot be used with an apollo softbox which mounts via an umbrella shaft.

Gab Laughin	23/09/2024
[Yes] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projector up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem! 5

Kevin	12/09/2024
[Yes] The screen functions as described. we used the additional brackets to mount the screen to a concrete wall. The mechanical parts of the screen are smooth and easy to use! 5

TC-DC	26/08/2024
[Front] We used the screen at our annual and special town meeting and found that it was better than anticipated. the powerpoints were projected so all could see no matter where they sat at our meeting. I couldn't be happier and worth the price. 5

Zack	25/08/2024
[150 degrees] I installed in my living room in between ceiling joists. It works great. I use it with a Panasonic HD projector. It impresses everyone who walks in the room. Has a clean appearance when retracted. Note: it didn't come with a 12v trigger as both the B&H customer service rep and myself thought it did. We both misunderstood the description (it's optional.) The part was available at Da-Lite for $80 and came with no instructions. I got it to work after a few emails and chats with da-lite. Also, I ended up placing some holes in the top of the case to mount using 8 Lag bolts into the 2nd story floor structure. All the hardware that comes with it assumes you will have access to hang it from the top which requires access via the side while it's in it's final position. I was putting it in a hole the size of the case in my finished ceiling so that method would not work ( I would have had to remove and re-install a lot of drywall). I knew this before I purchased by reading the installation instructions so no worries just a fact and maybe a consideration for future changes to the case or just the directions. 5

Doug	03/08/2024
[150 degrees] Looking forward to getting all of this stuff together 5

Yvenson	17/07/2024
[16:9] I love this product, Easy to install and and look even better on the wall. 5

Rikilah	13/07/2024
[Yes] This Screen was easy to install. It took 3 people and 2 ladders to get the job done. The remote is really not needed but i opted to install it as well. The motor runs really smooth. The screen is nice and wide. A really good buy. 5

anyonymous	26/06/2024
[Quiet] The screen was simple to mount (we used lag bolts and attached the screen to a wall.) The screen did not come with instructions on how to install the switch for a 120v motor...complicated the electrical install was inconsistent wire colors on the switch and the screen. After consulting an electrician and enduring his derision for working with this product - he correctly intuited the correct wiring configuration. A big thanks to the customer service at B&H. We ordered the screen 2 weeks from a graduation. The shipper lost the screen for nearly a week, without informing us. I contacted the shipper, who responded with a long distance shoulder shrug - explaining they would look for it again. Unable to motivate the shipper, I called B&H - they got involved, and the screen was in my driveway 36 hours later. Thanks B&H. 5

haze_1	16/06/2024
[16:9] I use it in a classroom at a university. It's got a great surface, brilliant white, big and more than I expected. It looks like a big LCD screen on the wall, way cool. 5