The Dotworkz D3 Tornado Dual Blower PoE Camera Enclosurefrom Dotworkz D3 Tornado Dual Blower PoE Camera Enclosurefeatures dual fans with 20 CFM (Cubic Feet per Minute) of air movement, keeping the camera and components inside from overheating when the temperature rises. The blower provides protection against environments with 95% humidity in temperatures up to 140°F, making it a suitable solution for hot and humid environments.

The D3 enclosure is compatible with multi-sensor 360 and 180° panoramic PTZ, dome, and mini-dome cameras . In addition to a camera, it can also hold an NVR, router, or other hardware. The IP68-rated enclosure is made of durable, impact-resistant, and weatherproof protective thermal plastic polycarbonate. It is powered via a PoE (Power of Ethernet) connector.

Compatible with Analog & IP Cameras    20 CFM Air Movement    Dual Fans for High Air Flow    Made of Polycarbonate Thermal Plastic    IP68-Rated Enclosure & Ports    Vari-Fit Internal Bracket Included

Compatible with IP and analog cameras

Vari-Fit internal bracket included for perfect fit

Impact-resistant polycarbonate thermal plastic

20 CFM high-flow air movement from the dual blower

IP66-rated against dust and salt water

IP68 (waterproof) connection ports

Onboard component mounting space for: routers, cellular transmitters, hard drives, UPS, WiMAX, and mesh hardware

Onboard antenna mounting tab

Heavy-duty lower lens

Related Questions and Answers

Q: 1. How can I get my matte box to mount with this? I'm struggling to make it fit on Canon Cine Primes.

A: To use a Zacuto Z-Drive (B&H# ZAZDRV) with a Canon Cine Prime lens you may need to add a (higher) riser plate/base plate to your camera so that you can achieve the desired distance between the gear on the lens' focus ring and the gear on the Z-Drive. That is because this particular product is more typically used with smaller lenses.

Q: 2. Is this compatible with PTZ PT20X-4K-G3?

A: TheDotworkz D2 Base Model Camera Enclosure with Extended Size External Lens (BH #DOD2BASEEXT) will work with the PTZOptics Move 4K SDI/HDMI/USB/IP PTZ Camera with 20x Optical Zoom (B&H # PT20X4KGYG3).

Q: 3. What comes in the box for the Zacuto Tornado Grip for Z-Drive? If I purchase the Zacuto C100 EVF Recoil will I be able to attach the Tornado to it or will I have to purchase a bunch of other items?

A: What you see is what you get. You'll need the z-drive and 15mm rails to mount that to. Z-drive is good...tornado grip is not necessary. You'll also need focus gear rings if you're using dslr glass.

Q: 4. does it make a whistle sound? looking for one that is silent.

A: It does not make a whistle. However, it is not silent for it makes whooshing sounds. I don't know of a rubber blower that is silent. I would suggest a camel hair brush for silent operation.

Q: 5. How useful is this design for handheld work (not on shoulder)? I don't find any images of it angled back toward camera operator on left side of camera (just forward for shoulder rig). If holding at chest or waist level, would it be comfortable to focus?(And I assume one can hold the handle of the ff to support the camera? No slip being just on one rail?)(FYI: Would ideally be used on FS5 with no rig.)

A: I have an fs7, and the configuration you are talking about works nicely, especially if you have the zacuto universal baseplate as the connection point for your 15mm rods, which is what i have.

Q: 6. does this fit HIK DS-2DE4A25IW-DE?

A: The Dotworkz 4K Optically Pure Vandal Tough Clear Lens for D-Series Camera Housings BH #DOKTCLNS4K mounts securely to Dotworkz D2 and D3 camera housings. Any compatibility with other cameras is purely coincidental.

Q: 7. what is this camera used for?

A: The Dotworkz D2 High Efficiency Power Solar Tornado Camera Enclosure with Clear Lens for Low Power Applications is not a camera. It is just an enclosure. The camera must be purchased separately.

Q: 8. Does this Item mount to the EVF Recoil?

A: It mounts to any 15mm rod.

Q: 9. Can the suction cup be used to remove lens elements?

A: No, the suction cup on the Sensei Bulb Air-Blower is meant to stand the bulb up and nothing more.

Q: 10. Will this model work with a AW-HE40HW PTZ Panasonic camera for Live Streaming Broadcast to protect camera from room dust, physical damage, etc.? To be located on back wall, 12ft off basketball gym floor and 90 ft away from subjects on a stage for P&W services on Sunday mornings. Basketball court is used 3-5 days/week by Boys & Girls club, Upward Basketball league, youth & children’s sports, etc. Dennis

A: Per Dotworkz: The Dotworkz D2 Base Model Camera Enclosure IP68 (D2-BASE) is compatible with all PTZ, Dome, Mini Dome, 360°, 180°, and Multi Sensor Camera Brands. The Dotworkz D2 Base Model Camera Enclosure IP68 (D2-BASE) fits a security camera, NVR, router, and environment specific hardware inside the durable, impact resistant, and weatherproof protective thermal plastic polycarbonate housing. Highlighted Features: IP and analog camera compatible Vari-Fit internal bracket included for perfect fit Impact Resistant Polycarbonate Thermal Plastic IP68 rated against dust, water, and salt water air. IP68 (water proof) connection ports Environmental options for virtually all applications Heavy-duty lower lens for impact resistance