Da-Lite 24711Bls Tensioned Advantage Electrol 50X80" Screen

Da-lite 24711bls Tensioned Advantage Electrol 50x80" Screen

Product Code: eq176669
Availability: In Stock

$2,340.00 $3,556.80

Qty

13 reviews Write a review

Description
Reviews (13)

Designed to eliminate the extra step of finishing the screen with trim, the 120V Da-Lite 24711BLS Tensioned Advantage Electrol 50x80" Screenfrom Da-Lite 24711BLS Tensioned Advantage Electrol 50x80" Screenis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Da-Lite 24711BLS Tensioned Advantage Electrol 50x80" ScreenThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24711FLS.

94" Diagonal / 16:10 Aspect Ratio HD Progressive 1.3 Screen Surface 1.3 Gain / 150° Viewing Angle Slim-Tab Tensioning System White Powder-Coated Case Installs Above the Ceiling Black Backing Standard Box Only (No Screen Fabric) Silent Motor Low Voltage Control (LVC)

Key Specs
Front/Rear Projection	Front
Aspect Ratio	16:10
Diagonal	94.0" / 238.8 cm
Gain	1.3
Tensioned	Yes
Type
Series	Tensioned Advantage Electrol
Front/Rear Projection	Front
Aspect Ratio	16:10
Style	Ceiling-Recessed, Wall and Ceiling
Dimensions
Viewing Area	50.0 x 80.0" / 127.0 x 203.2 cm
Diagonal	94.0" / 238.8 cm
Surface
Finish Name	HD Progressive 1.3
Gain	1.3
Viewing Angle	150 degrees
Tensioned	Yes
Black Backing	Yes
Controls
Motor	Quiet
Low Voltage Control	Yes
Casing
Length	96.5" / 245.1 cm
General
Voltage	120 VAC/60 Hz

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

Smooth Roll Technology to keep your screen flat
Slim-Tab, a lower profile and stronger tab design to keep your screen taut
Tensioning Cable System to prevent warping and ensure even lateral tension

UL Plenum rated case
White powder-coated case for a clean aesthetic
Black-backed screen material for enhanced image quality and opacity
Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Can these be used as continuous light as well?

A: The Dlite has a modeling light but it would not be a recommended use of it to be used for video.

Q: 2. Hi dear B&H friends. It comes for Sony Multi Interface Shoe, ie. A7, A7II, A7III, A60...? -Sergio- from PR

A: The Odin Lite is a Manual trigger. You can use it on any camera system including Sony.

Q: 3. Will this fit on the new Lastolite Joe McNally Ezybox Speed-Lite 2 Plus? (B&H # LALS2430JM) (MFR # LL LS2430JM)

A: Yes it will

Q: 4. will this talk to the original odin receivers for canon?

A: Yes, this transmitter can trigger flashes equipped with the original Phottix Odin receivers.

Q: 5. Has anybody seen a lit of the various flash durations for these? I know they report 1/800th at full power, but what are the flash durations at, say, 1/2, or 1/16th? I can't find anything like this listed anywhere. I'm considering the new HS transmitter, and these durations are going to be important.

A: Hi,There is no published flash duration data for lower settings. Generally, theFastest flash duration is always at full flash power for our units, and it gets slower when you decrease flash power.The reason is that by reducing the flash power you also decrease the capacitor voltage and lower voltage will give a longer, slower flash duration. This rule does not apply for ELC units as they are using a different technology.A global rule at minimum power the flash duration will be around 40% slower.I hope this helps.Regards,Will HBrand Manager Lighting, MAC Group US

Q: 6. Does the modeling light stay on during flash? I'm hoping to use this at low power with a large aperture...

A: You can set the modeling lamp on the D-Lite RX4 to stay on while the flash fires.

Q: 7. Will these flashes work on the Panasonic GH5?

A: These flashes will work with a Panasonic GH5.

Q: 8. Can you tell me which softbox is compatible with Elinchrom D-Lite 400W/s RX 4 Flash Head?

A: You may use a softbox such as the Elinchrom Rotalux Deep Octabox (100cm / 39"), BH # EL26648 along with a speed ring to attach it such as the Elinchrom Rotalux Speed Ring for Elinchrom Flash Heads, BH # EL26570. https://bhpho.to/3XZVRNP https://bhpho.to/3XzSKwp

Q: 9. does the guaranty covers/applies to mexico?

A: As long as the purchase was from B&H, it applies. However any warranty work will have to be performed by MAC Group in New York.

Q: 10. Will it take a 9mm shaft? (Hate to be picky.)

A: The Manfrotto 026 Lite-Tite Swivel Umbrella Adapter will only accept an umbrella shaft up to 8mm.

Peter	25/09/2024
[1.3] After correspondence with B&H on product lines and availability , I selected the cinema contour to marry up with the projector specifications that were needed. It also worked well with the acoustic demands of the in wall speakers hidden behind it . The result was spot on. Excellent price coupled with exceptional performance. B&H got the job done. Pro service for pro contractors. 5

Gab Laughin	21/09/2024
[16:10] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projector up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem! 5

Cat5 King	17/09/2024
[Front] This screen was installed in a small conference room with an NEC projector. The screen can be wall or ceiling mounted, and this flexibility came in handy when we had to switch to a ceiling mount at the last moment. The screen presents very well, and is unobtrusive when retracted. The tensioning system works nicely, and we didn't have to change any of the factory settings for the drop. I would have liked to see some additional mounting holes for attaching the screen to studs in the wall, so the installer has more options for wall mounting. 5

Rikilah	16/08/2024
[1.3] This Screen was easy to install. It took 3 people and 2 ladders to get the job done. The remote is really not needed but i opted to install it as well. The motor runs really smooth. The screen is nice and wide. A really good buy. 5

Andreas the squint	01/08/2024
[120 VAC/60 Hz] I used this screen in a small conference room and it was very simple to instal. 5

anyonymous	25/07/2024
[150 degrees] The screen was simple to mount (we used lag bolts and attached the screen to a wall.) The screen did not come with instructions on how to install the switch for a 120v motor...complicated the electrical install was inconsistent wire colors on the switch and the screen. After consulting an electrician and enduring his derision for working with this product - he correctly intuited the correct wiring configuration. A big thanks to the customer service at B&H. We ordered the screen 2 weeks from a graduation. The shipper lost the screen for nearly a week, without informing us. I contacted the shipper, who responded with a long distance shoulder shrug - explaining they would look for it again. Unable to motivate the shipper, I called B&H - they got involved, and the screen was in my driveway 36 hours later. Thanks B&H. 5

Enzo	09/07/2024
[Yes] Assembly for very straight forward. Looks great on the wall. Really like the velour wrap around the frame. It does a very good job of rejecting light back onto the screen. Because of the size, (110 inch) I decided to put up a folding screen to cover it when not in use. 5

Chip	26/05/2024
[16:10] We use the screen in our church sanctuary once or twice a month. Installing it was an adventure with the weight and length, but several sections of scaffolding and a couple friends made the install move along nicely. The instructions for wiring were right on and it worked first try! The image is right on and visible the entire length of our viewing area (over 100'). 5

petarm	24/05/2024
[1.3] We use the electrol screens almost exclusively in close to a 100 locations. They are versatile and durable. 5

Zack	27/04/2024
[Yes] I installed in my living room in between ceiling joists. It works great. I use it with a Panasonic HD projector. It impresses everyone who walks in the room. Has a clean appearance when retracted. Note: it didn't come with a 12v trigger as both the B&H customer service rep and myself thought it did. We both misunderstood the description (it's optional.) The part was available at Da-Lite for $80 and came with no instructions. I got it to work after a few emails and chats with da-lite. Also, I ended up placing some holes in the top of the case to mount using 8 Lag bolts into the 2nd story floor structure. All the hardware that comes with it assumes you will have access to hang it from the top which requires access via the side while it's in it's final position. I was putting it in a hole the size of the case in my finished ceiling so that method would not work ( I would have had to remove and re-install a lot of drywall). I knew this before I purchased by reading the installation instructions so no worries just a fact and maybe a consideration for future changes to the case or just the directions. 5