For larger venue installs, the 120V Da-Lite 24720FL Tensioned Advantage Electrol Screen 121x216"(box available separately) from Da-Lite 24720FL Tensioned Advantage Electrol Screen 121x216"is designed to eliminate the extra step of finishing the screen with trim. The Advantage line of projection screens is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets make it easy to attach the screen housing to the structure above the drop ceiling.

Tensioning is provided to help ensure the smoothest surface possible.

Da-Lite 24720FL Tensioned Advantage Electrol Screen 121x216"This screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24720BL.

247" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Surface    1.3 Gain / 150° Viewing Angle    Smooth Roll Technology    Slim-Tab Lower-Profile Tab Design    Installs Above the Ceiling    Fabric, Roller, Motor Only    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen perfectly flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• Standard Low Voltage Control (LVC) to keep your screen operation flexible
• UL Plenum rated case
• Decora-style, three-button wall switch
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. will this talk to the original odin receivers for canon?

A: Yes, this transmitter can trigger flashes equipped with the original Phottix Odin receivers.

Q: 2. Does the modeling light stay on during flash? I'm hoping to use this at low power with a large aperture...

A: You can set the modeling lamp on the D-Lite RX4 to stay on while the flash fires.

Q: 3. Can you tell me which softbox is compatible with Elinchrom D-Lite 400W/s RX 4 Flash Head?

A: You may use a softbox such as the Elinchrom Rotalux Deep Octabox (100cm / 39"), BH # EL26648 along with a speed ring to attach it such as the Elinchrom Rotalux Speed Ring for Elinchrom Flash Heads, BH # EL26570. https://bhpho.to/3XZVRNP https://bhpho.to/3XzSKwp

Q: 4. Can this be triggered by pocket wizard?

A: Only if a PocketWizard is attached to it; it does not have a built-in PW receiver.

Q: 5. could I trigger D-Lite with flash slave trigger or as slave ? and what the x-sync speed when as slave ? thanks

A: You can set up the strobes as slaves individually or together with a sinc cable, remote or on camera flash. I believe the x sinc should be based on the flash sinc on your camera. The elinchrom web site has manuals on the d-lite 4 strobe. The optional hs trigger works great . You can control each and all strobes and use high shutter speeds.

Q: 6. Will this fit on the new Lastolite Joe McNally Ezybox Speed-Lite 2 Plus? (B&H # LALS2430JM) (MFR # LL LS2430JM)

A: Yes it will

Q: 7. Will these flashes work on the Panasonic GH5?

A: These flashes will work with a Panasonic GH5.

Q: 8. Hi dear B&H friends. It comes for Sony Multi Interface Shoe, ie. A7, A7II, A7III, A60...? -Sergio- from PR

A: The Odin Lite is a Manual trigger. You can use it on any camera system including Sony.

Q: 9. Is this compatible with a Sekonic Litemaster Pro L-478DR using its own Pocketwizard transmitter? If not, can Pocketwizard receivers be connected to them to work?

A: If you are referring to the Sekonic LiteMaster Pro L-478DR-U-EL Series Light Meter for Elinchrom EL Skyport System, B&H # SEL478DRELU, then it would be fully compatible for use with the Elinchrom D-Lite RX 4/4 Softbox To Go Kit as packaged. If you instead own the Sekonic LiteMaster Pro L-478DR-U Light Meter for PocketWizard System, B&H # SEL478DRU, it would not be directly compatible for use with the Elinchrom D-Lite RX 4/4 Softbox To Go Kit. However, you may use the Sekonic LiteMaster Pro L-478DR-U Light Meter for PocketWizard System with the light kit by connecting the included Elinchrom EL-Skyport Transmitter Plus (B&H # ELSTP) to the synchro terminal on the bottom of the light meter with the Metz 36-50 Standard Sync Cord, B&H # ME5548. When you press the MEASURE button on the meter, it will trigger the transmitter connected via the cable and trigger your lights.If If you are using PocketWizard remotes with the Sekonic LiteMaster Pro L-478DR-U Light Meter for PocketWizard System and the light kit, the light meter will communicate directly with the PocketWizard remotes. However, you will have to connect the PocketWizard remotes to the Elinchrom monolight strobes via the 1/8 (3.5mm) sync terminal on the rear of the monolights via the PC sync cables included with the PocketWizard remotes. The PocketWizard remotes are not directly compatible with the Elinchrom Skyport receivers built into the light fixture, so they have to be connected via the sync cable. If you do not have a sync cable, the PocketWizard PC1N Locking PC Sync Cable (1'), B&H # WIPC1NPC, would work for your usage needs.

Q: 10. Has anybody seen a lit of the various flash durations for these? I know they report 1/800th at full power, but what are the flash durations at, say, 1/2, or 1/16th? I can't find anything like this listed anywhere. I'm considering the new HS transmitter, and these durations are going to be important.

A: Hi,There is no published flash duration data for lower settings. Generally, theFastest flash duration is always at full flash power for our units, and it gets slower when you decrease flash power.The reason is that by reducing the flash power you also decrease the capacitor voltage and lower voltage will give a longer, slower flash duration. This rule does not apply for ELC units as they are using a different technology.A global rule at minimum power the flash duration will be around 40% slower.I hope this helps.Regards,Will HBrand Manager Lighting, MAC Group US