Designed to eliminate the extra step of finishing the screen with trim, the 220V Da-Lite 21792EBLSI Tensioned Advantage Electrol Screen 52x92"from Da-Lite 21792EBLSI Tensioned Advantage Electrol Screen 52x92"is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Da-Lite 21792EBLSI Tensioned Advantage Electrol Screen 52x92"This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 21792EFLSI.

106" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.1 Screen Surface    1.1 Gain / 170° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Video Projector Interface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction. Cone: 170° Gain: 1.1

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Does this work with the hot shoe on Fujifilm X-T2?

A: The El-skyports are pretty universal. I've used them with my 5D and my Panasonic G7 without problem.

Q: 2. Can I use this light kit with Leica M10for studio shootings?

A: Yes you could use this with a Leica M10.

Q: 3. What is the part # for the reflector that will fit the D-Lite 400W/s RX 4? I see that it does not come with one.

A: ELR6 is the umbrella reflector https://bhpho.to/2K0SfIe.

Q: 4. Does it also work with the Rotolight Elinchrom Skyport EL transmitter? (So not the Plus model) I'like to use it with Rotolights.

A: The Elinchrom D light RX One flash head does have A wireless receiver built in to the unit.

Q: 5. does the guaranty covers/applies to mexico?

A: As long as the purchase was from B&H, it applies. However any warranty work will have to be performed by MAC Group in New York.

Q: 6. Has anybody seen a lit of the various flash durations for these? I know they report 1/800th at full power, but what are the flash durations at, say, 1/2, or 1/16th? I can't find anything like this listed anywhere. I'm considering the new HS transmitter, and these durations are going to be important.

A: Hi,There is no published flash duration data for lower settings. Generally, theFastest flash duration is always at full flash power for our units, and it gets slower when you decrease flash power.The reason is that by reducing the flash power you also decrease the capacitor voltage and lower voltage will give a longer, slower flash duration. This rule does not apply for ELC units as they are using a different technology.A global rule at minimum power the flash duration will be around 40% slower.I hope this helps.Regards,Will HBrand Manager Lighting, MAC Group US

Q: 7. Hi dear B&H friends. It comes for Sony Multi Interface Shoe, ie. A7, A7II, A7III, A60...? -Sergio- from PR

A: The Odin Lite is a Manual trigger. You can use it on any camera system including Sony.

Q: 8. Will this work with a canon eos 250d? Even the hot shoe included?

A: Yes, the Elinchrom Skyport transmitter included with the Elinchrom D-Lite RX 4/4 Softbox to Go Kit would be compatible with DSLR cameras such as the Canon EOS 250D.

Q: 9. Is there a portable power pack to go with the D-Lite RX 4? I can't find one anywhere. I'd like to take it outdoors for Senior sessions.

A: No, it uses mains power - for outdoors you would probably need a generator.Alternatively use something like an elinchrom ranger quadra system

Q: 10. Does the modeling light stay on during flash? I'm hoping to use this at low power with a large aperture...

A: You can set the modeling lamp on the D-Lite RX4 to stay on while the flash fires.