Designed to eliminate the extra step of finishing the screen with trim, the 220V Da-Lite 24705EBLSI Tensioned Advantage Electrol Screen 52x92"from Da-Lite 24705EBLSI Tensioned Advantage Electrol Screen 52x92"is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Da-Lite 24705EBLSI Tensioned Advantage Electrol Screen 52x92"This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24705EFLSI.

106" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Video Projector Interface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Is there a portable power pack to go with the D-Lite RX 4? I can't find one anywhere. I'd like to take it outdoors for Senior sessions.

A: No, it uses mains power - for outdoors you would probably need a generator.Alternatively use something like an elinchrom ranger quadra system

Q: 2. Can the motor be powered by DTAP to USB C?

A: Yes, the SmallRig Wireless Follow Focus Lite Kit can use a D-Tap to USB-C as long as it has PD power.

Q: 3. Will it take a 9mm shaft? (Hate to be picky.)

A: The Manfrotto 026 Lite-Tite Swivel Umbrella Adapter will only accept an umbrella shaft up to 8mm.

Q: 4. Does this work with the hot shoe on Fujifilm X-T2?

A: The El-skyports are pretty universal. I've used them with my 5D and my Panasonic G7 without problem.

Q: 5. does the guaranty covers/applies to mexico?

A: As long as the purchase was from B&H, it applies. However any warranty work will have to be performed by MAC Group in New York.

Q: 6. Will these flashes work on the Panasonic GH5?

A: These flashes will work with a Panasonic GH5.

Q: 7. Hi dear B&H friends. It comes for Sony Multi Interface Shoe, ie. A7, A7II, A7III, A60...? -Sergio- from PR

A: The Odin Lite is a Manual trigger. You can use it on any camera system including Sony.

Q: 8. Does it also work with the Rotolight Elinchrom Skyport EL transmitter? (So not the Plus model) I'like to use it with Rotolights.

A: The Elinchrom D light RX One flash head does have A wireless receiver built in to the unit.

Q: 9. could I trigger D-Lite with flash slave trigger or as slave ? and what the x-sync speed when as slave ? thanks

A: You can set up the strobes as slaves individually or together with a sinc cable, remote or on camera flash. I believe the x sinc should be based on the flash sinc on your camera. The elinchrom web site has manuals on the d-lite 4 strobe. The optional hs trigger works great . You can control each and all strobes and use high shutter speeds.

Q: 10. Can you tell me which softbox is compatible with Elinchrom D-Lite 400W/s RX 4 Flash Head?

A: You may use a softbox such as the Elinchrom Rotalux Deep Octabox (100cm / 39"), BH # EL26648 along with a speed ring to attach it such as the Elinchrom Rotalux Speed Ring for Elinchrom Flash Heads, BH # EL26570. https://bhpho.to/3XZVRNP https://bhpho.to/3XzSKwp