Da-Lite 21808Eblsi Tensioned Advantage Electrol 60X96" Screen

Da-lite 21808eblsi Tensioned Advantage Electrol 60x96" Screen

Product Code: eq176679
Availability: In Stock

$2,238.00 $3,021.30

Qty

10 reviews Write a review

Description
Reviews (10)

Designed to eliminate the extra step of finishing the screen with trim, the 220V Da-Lite 21808EBLSI Tensioned Advantage Electrol 60x96" Screenfrom Da-Lite 21808EBLSI Tensioned Advantage Electrol 60x96" Screenis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Da-Lite 21808EBLSI Tensioned Advantage Electrol 60x96" ScreenThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 21808EFLSI.

113" Diagonal / 16:10 Aspect Ratio HD Progressive 1.1 Screen Surface 1.1 Gain / 170° Viewing Angle Slim-Tab Tensioning System White Powder-Coated Case Installs Above the Ceiling Black Backing Standard Box Only (No Screen Fabric) Silent Motor Video Projector Interface

Key Specs
Front/Rear Projection	Front
Aspect Ratio	16:10
Diagonal	113.0" / 287.0 cm
Gain	1.1
Tensioned	Yes
Type
Series	Tensioned Advantage Electrol
Front/Rear Projection	Front
Aspect Ratio	16:10
Style	Ceiling-Recessed, Wall and Ceiling
Dimensions
Viewing Area	60.0 x 96.0" / 152.4 x 243.8 cm
Diagonal	113.0" / 287.0 cm
Surface
Finish Name	HD Progressive 1.1
Gain	1.1
Viewing Angle	170 degrees
Tensioned	Yes
Black Backing	Yes
Controls
Motor	Quiet
Low Voltage Control	Yes
Casing
Length	114.0" / 289.6 cm
General
Voltage	220 VAC/50 Hz

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction. Cone: 170° Gain: 1.1

Smooth Roll Technology to keep your screen flat
Slim-Tab, a lower profile and stronger tab design to keep your screen taut
Tensioning Cable System to prevent warping and ensure even lateral tension

UL Plenum rated case
White powder-coated case for a clean aesthetic
Black-backed screen material for enhanced image quality and opacity
Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. will this work on a hyperx quadcast mic?

A: This will work for mics up to 65mm in diameter. The HyperX Quadcast microphone is 50mm in diameter, so the Auray OMPF-33 will work with it.

Q: 2. Will this fit a Senal UB-440 Professional USB Microphone?

A: Yes it will.

Q: 3. does the guaranty covers/applies to mexico?

A: As long as the purchase was from B&H, it applies. However any warranty work will have to be performed by MAC Group in New York.

Q: 4. Does this pop filter fit the Samson G Track Pro?

A: You would have to measure the Samson G - Track and see if it fits. This pop screen is for microphone sizes - 1.8 to 2.5" / 45 to 65 mm.

Q: 5. Will this fit CAD E100s?

A: Due to it's width, we wouldn't recommend this for the CAD E100s. A standard gooseneck pop filter would work better. Here's a suggestion B&H # AUPFNY6.

Q: 6. Will this fit an AKG 440?

A: The Auray OMPF-33 will fit side address microphones with diameters from 1.8 to 2.5 .

Q: 7. Will this fit on an apogee mic?

A: yes, the bands adjust in the mic

Q: 8. Does it also work with the Rotolight Elinchrom Skyport EL transmitter? (So not the Plus model) I'like to use it with Rotolights.

A: The Elinchrom D light RX One flash head does have A wireless receiver built in to the unit.

Q: 9. Will this fit on a Blue Yeti?

A: It should fit fine.

Q: 10. Is this compatible with a Sekonic Litemaster Pro L-478DR using its own Pocketwizard transmitter? If not, can Pocketwizard receivers be connected to them to work?

A: If you are referring to the Sekonic LiteMaster Pro L-478DR-U-EL Series Light Meter for Elinchrom EL Skyport System, B&H # SEL478DRELU, then it would be fully compatible for use with the Elinchrom D-Lite RX 4/4 Softbox To Go Kit as packaged. If you instead own the Sekonic LiteMaster Pro L-478DR-U Light Meter for PocketWizard System, B&H # SEL478DRU, it would not be directly compatible for use with the Elinchrom D-Lite RX 4/4 Softbox To Go Kit. However, you may use the Sekonic LiteMaster Pro L-478DR-U Light Meter for PocketWizard System with the light kit by connecting the included Elinchrom EL-Skyport Transmitter Plus (B&H # ELSTP) to the synchro terminal on the bottom of the light meter with the Metz 36-50 Standard Sync Cord, B&H # ME5548. When you press the MEASURE button on the meter, it will trigger the transmitter connected via the cable and trigger your lights.If If you are using PocketWizard remotes with the Sekonic LiteMaster Pro L-478DR-U Light Meter for PocketWizard System and the light kit, the light meter will communicate directly with the PocketWizard remotes. However, you will have to connect the PocketWizard remotes to the Elinchrom monolight strobes via the 1/8 (3.5mm) sync terminal on the rear of the monolights via the PC sync cables included with the PocketWizard remotes. The PocketWizard remotes are not directly compatible with the Elinchrom Skyport receivers built into the light fixture, so they have to be connected via the sync cable. If you do not have a sync cable, the PocketWizard PC1N Locking PC Sync Cable (1'), B&H # WIPC1NPC, would work for your usage needs.

Gab Laughin	29/09/2024
[Yes] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projector up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem! 5

Rikilah	27/09/2024
[Yes] This Screen was easy to install. It took 3 people and 2 ladders to get the job done. The remote is really not needed but i opted to install it as well. The motor runs really smooth. The screen is nice and wide. A really good buy. 5

Doug	14/09/2024
[Yes] Looking forward to getting all of this stuff together 5

Cat5 King	26/08/2024
[Yes] This screen was installed in a small conference room with an NEC projector. The screen can be wall or ceiling mounted, and this flexibility came in handy when we had to switch to a ceiling mount at the last moment. The screen presents very well, and is unobtrusive when retracted. The tensioning system works nicely, and we didn't have to change any of the factory settings for the drop. I would have liked to see some additional mounting holes for attaching the screen to studs in the wall, so the installer has more options for wall mounting. 5

Zack	26/06/2024
[Quiet] I installed in my living room in between ceiling joists. It works great. I use it with a Panasonic HD projector. It impresses everyone who walks in the room. Has a clean appearance when retracted. Note: it didn't come with a 12v trigger as both the B&H customer service rep and myself thought it did. We both misunderstood the description (it's optional.) The part was available at Da-Lite for $80 and came with no instructions. I got it to work after a few emails and chats with da-lite. Also, I ended up placing some holes in the top of the case to mount using 8 Lag bolts into the 2nd story floor structure. All the hardware that comes with it assumes you will have access to hang it from the top which requires access via the side while it's in it's final position. I was putting it in a hole the size of the case in my finished ceiling so that method would not work ( I would have had to remove and re-install a lot of drywall). I knew this before I purchased by reading the installation instructions so no worries just a fact and maybe a consideration for future changes to the case or just the directions. 5

Chip	03/06/2024
[Front] We use the screen in our church sanctuary once or twice a month. Installing it was an adventure with the weight and length, but several sections of scaffolding and a couple friends made the install move along nicely. The instructions for wiring were right on and it worked first try! The image is right on and visible the entire length of our viewing area (over 100'). 5

Gab Laughin	19/05/2024
[Front] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projection screen/case up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem! 5