Designed to eliminate the extra step of finishing the screen with trim, the 220V Da-Lite 20848EFLS Motorized Screen 65x104 Ceiling-Recessed 220Vfrom Da-Lite 20848EFLS Motorized Screen 65x104 Ceiling-Recessed 220Vis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Da-Lite 20848EFLS Motorized Screen 65x104 Ceiling-Recessed 220VThis screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 20848EBLS.

123" Diagonal / 16:10 Aspect Ratio    Da-Mat Screen Surface    1.0 Gain / 120° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Fabric, Roller, Motor Only    Silent Motor    Low Voltage Control (LVC)

Da-Mat is a unity gain vinyl surface with a smoother surface than the Matte White finish. It features a white surface for good color reproduction for environments with controllable ambient light. Cone: 120° Gain: 1.0

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Are there also soft boxes included?(:

A: Comes with two soft boxes. I bought with two umbrellas as well, which I used shooting 141 head and shoulders photos on my first assignment. Everything but the synch cord worked perfectly.

Q: 2. I have a Pentax K3II and a Sigma 610 DG Super flash. I want to know how to do to be able to connect a flash strobe kit through a radio trigger. Which ones would be compatible for my K3II in order to be able to make the strobes functional and, if possible, also to use the Sigma? What do you recommend buying in addition to this kit?

A: I would recommend purchasing the Vello FreeWave LR Kit with 2 Receivers, B&H # VERFWLRK, for your usage needs. The Impact Two Monolight Kit (220V), B&H # IMEX100A2LKX, has a 1/8 (3.5mm) miniphone sync terminal on the rear of the strobe monolight. The Vello FreeWave LR Kit comes with a miniphone to miniphone cable, so you may connect the Vello FreeWave LR receiver to the Impact monolight. The receiver also has a hot shoe on the top of the unit, onto which you may mount the Sigma EF 610 DG Super Flash. As the kit I listed above comes with two receivers, you may connect one receiver to the Sigma EF 610 DG Super Flash, and one to one of the monolights in the Impact monolight kit. As the Impact monolights have built-in optical slaves, the unit without the Vello receiver will trigger when it sees the light output from the light fixture with the receiver. Do note the output of the Sigma EF 610 DG Super Flash will have to be set manually when using this setup. There is no option that will work and retain TTL automatic flash capability with this setup.

Q: 3. How long is the sync cord? Can you buy a sync cord in longer lengths?

A: The included sync cable is 15 feet long. You can an extension like the Impact Sync Cord Male PC to Female PC (16') B&H # IMPCMPCF16.

Q: 4. I was just wondering if anyone has replaced the modelling lamp with an LED light bulb? I imagine you could get a lot more light output from an LED bulb, especially a cree bulb. I understand it would have to be the dimmable variety...

A: It has not been tested by the manufacture. It is not recommended to do that as you can damage the electronics if there is a compatibility issue.

Q: 5. I just received my impact EX-100A monolight today. And realized my cord is a European cord. I wanted to know if I am able to get an adapter for it so that it works, or do I have to return it?

A: Hi Sharlene, you have bought the 220V AC unit, so, you must know if where you are you have that electricity. If you are, you just need to buy the adapter. I have used mine in Chile where the electricity comes at 220V AC, but I needed an adapter to plugging in.

Q: 6. Are there two lights included with this unit. Are the lights 5600K?

A: Yes, the kit comes with two Impact One Monolights. They are strobe type lights and are daylight rated.Note the camera you use this with needs to have a sync port or you will need to get an adapter or wireless sync.And this is made for still photos not video.

Q: 7. does this unit have hss?

A: No it doesn't have HSS

Q: 8. I have a Nikon D3300, Do I need to buy the PowerTrigger transmitter in order to make the Flash work? Or the sync cord will do the job.

A: I am not familiar with Nikon but I can tell you that the sync cord works with my Canon DSLR. As long as there is an outlet on the side of the camera, which there should be, it should work fine.

Q: 9. How many strobes. How many soft boxes in the kit.? Modeling lights?

A: This kit would include two Impact EX 100 monolights, two softboxes with speed rings, two sync cables, two power cords, flashtube/modeling lamp for each head, a reflector for each head, spare fuses for each head, Impact 8 ft light stands and a 1 year warranty on each head. The only thing not included in this kit is a bag.

Q: 10. Im Looking for lights that will work for an ecommerce site that will produce an all white pure background with no grey. If i buy two of these kits will I be able to shoot a full body shot on a live model and will the background come out white? my model is 5 10 / 5'11.. thanks

A: I The only way I believe these or any two lights will produce a pure white background is to use a green screen background and remove the background (or make it white) with software. If the exposer is correct for the subject, the exposer will always be somewhat less for the background the difference may be acceptable, but not absolute. can think of one vay these only way these (or any two