Neutrik Sccd-W Spring-Loaded Cover For Chassis Connectors

Neutrik Sccd-w Spring-loaded Cover For Chassis Connectors

Product Code: eq176773
Availability: In Stock

$42.63 $57.55

Qty

16 reviews Write a review

Description
Reviews (16)

The Neutrik SCCD-W Spring-Loaded Cover protects a variety of chassis connectors against dust and water. This IP65-rated, water-resistant cover is spring-hinged, so it closes automatically after you detach a cable from its port. The clear design enables you to still identify the port when the cover is closed. See below for a list of compatible ports.

Transparent, Spring-Loaded Cover IP65 Protection Against Dust and Water For XLR, 1/4", USB, HDMI & Other Ports Closes Automatically

General
Maximum Opening	100°
Maximum Panel Thickness	0.06" / 1.5 mm
Environmental
IP Rating	IP65
Physical
Dimensions	Not Specified by Manufacturer
Weight	Not Specified by Manufacturer
Packaging Info
Package Weight	0.06 lb
Box Dimensions (LxWxH)	3 x 1.5 x 0.5"

XLR D Series female
XLR D Series male
1/4" Jacks D Series
speakON NL2M* and NL4M*
powerCON 20 A Series NAC3MPA* and NAC3MPB*
powerCON TRUE1 NAC3MPX
opticalCON chassis connectors
USB NAUSB-W*
HDMI NAHDMI-W*
D-SUB NADB*
Firewire NA1394-6-W*
etherCON D Series
etherCON CAT6 chassis connectors
etherCON CAT6A chassis connectors
BNC D Series
Phono (RCA) chassis connectors

Related Questions and Answers

Q: 1. Will this work with the X2D?

A: Yes, the OP/TECH USA Super Pro A Connectors (Set of 2, Black) will work with the Hasselblad X2D 100C Medium Format Mirrorless Camera.

Q: 2. Will the Pro A Connector work with the Bronica GS-1?

A: No, the Bronica GS-1 uses a standard strap lug, so the OP/TECH Pro A Connector is not compatible.

Q: 3. How effective is it in mitigating vertical movement while walking?

A: The FLYCAM Flowline Placid Two-Axis Spring Arm does a decent job stabilizing the Z-Axis when paired with a 3-axis motorized gimbal, but it is not exactly at the level of a dedicated dual iso-elastic stabilizer arm commonly found on Steadicams.

Q: 4. can I use this with the : DigitalFoto Solution Limited ER3-10 Vest ?

A: The FLYCAM Flowline Placid Two-Axis Spring Arm may require modifications to attach to a ER3-10 vest. We recommend the DigitalFoto Dampening arm models listed below. DigitalFoto Solution Limited Damping Arm for Vest & Bar Stabilizer (2.2 to 39.7 lb Payload) BH #DIDA118

Q: 5. does it stabilize handheld camera like canon c100 mark II ?

A: This system supports cameras and rigs from 11 to 44 pounds. You could use it with a rig for the C100 Mark II, if it weighs between 11 to 44 pounds. You would need to rig out a C100 Mark II to get to at least 11 pounds for this system.

Q: 6. How wide are the snap connectors?

A: The overall size is 1 . The interior of the clip is 7/8

Q: 7. Which Pelican case fits the foam cutout?

A: A case such as the Pelican 1485 Air Case (SKU: PE1485ACWFBK), should be able to fit the FLYCAM Flowline Placid Two-Axis Spring Arm and any packing materials from it. https://www.bhphotovideo.com/c/product/1244879-REG/pelican_014850_0000_110_1485air_compact_hand_carry_case.html/specs

Q: 8. Is the base removable?

A: Unfortunately, the base is not removable on this stand. For a model that does have a removable base, please see the following link: a href= http://bhpho.to/1lrp0dw target= _blank http://bhpho.to/1lrp0dw/a

Q: 9. What dose Spring-Loaded mean?

A: Each section of the riser has a spring attached internally at the bottom end as a safety feature to absorb shock from a sudden drop.

Q: 10. I'm looking for Op Tech connectors for my Nikon D4s, which connectors are stong enough to hold a D4s with a 24-70 2.8 lens?

A: Yes, the straps are strong enough for the 24-70 lens and more. I use them as safety straps on my 400 and 600 4.0.

Alex	17/09/2024
[IP65] Works very well. 5

Alan	07/09/2024
[100°] This nifty, and pretty economical bipod just finished off my tweaks to my AR. It's got strong extending legs, so I can carry a 40 round mag when at the range, and it's strong spring legs snap positively into position, either down to aim, or folded up out of the way when in transit. Just as good as the overly-priced examples in the shops! Well done B&H for stocking kit like this! 5

Christoph	06/09/2024
[100°] I teach podcasting / audio production and this is the pop filter I recommend to my students. It seems a bit pricey, but other nylon/fabric pop filters do very little to eliminate plosives. The metal mesh design on these filters completely redirect and disperse air flow, without attenuating the signal/dialogue or distorting the pitch/frequency response. Extremely effective filters for use in professional recordings, vocals, narration, voice acting, radio, or podcasting. 5

Greg I	29/08/2024
[100°] The screen is easy mounted, works great - a great asset for my podcast recording. 5

Pablo	27/08/2024
[0.06 lb] Very affordable and works great on my AR-15. Definitely helps me with stability with 300+ yard shots with my SPR. Mounts great on a picatinny style rail. 5

Andrew	07/08/2024
[3 x 1.5 x 0.5"] Used it to mount antennas on the outside of a box. Worked good. 5

Jose	03/08/2024
[IP65] Great product. Works fine and not expensive. 5

Steve	19/07/2024
[0.06 lb] love it! 5

Anthony	12/07/2024
[0.06 lb] Double layered pop filter, guards my VO mic from any pops I might throw at it. The neck is nice and stiff - obviously still flexible and posable, but won't sag or flop out of place after I've positioned it (which has been a problem with previous gooseneck pop filters). Great all around. 5