The BOSS GEB-7 Bass Equalizer Pedal for Enhanced Soundfrom BOSS GEB-7 Bass Equalizer Pedal for Enhanced Soundis a 7-band graphic equalizer specially designed for bass guitars and upright bass instruments. The 7 bands offer a 15 dB boost/cut over a frequency range of 50 Hz to 10 kHz, with the 10 kHz band being a high-frequency shelf. With this versatile pedal, you can set the EQ for a high-mid/treble boost for some popping and slapping, or round off the high end and emphasize the low frequencies for a thicker tone. A level control can boost or cut overall volume to balance with your dry signal, or offer a boost while the pedal is engaged.

7-Band Equalizer Pedal for Bass Guitar    50 Hz to 10 kHz Range    ±15 dB Boost/Cut on All Frequencies    Overall Volume Boost/Cut    Buffered Bypass

The GEB-7 can run off of a single 9V battery or an optional external 9 VDC power supply. The electronics are encased in BOSS's iconic durable metal housing with a non-slip rubber base. The battery compartment can be easily accessed by unscrewing the thumbscrew at the front of the pedal. This pedal utilizes a buffered bypass for silent switching and driving long cable runs even while the pedal is disengaged.

Related Questions and Answers

Q: 1. Does this monitor accept power from a power bank using USB-C ?

A: The USB-C port of the Hollyland Mars M1 Enhanced 5.5" Wireless Transceiver Monitor is only for firmaware updates and not power unfortunately We offer USB-C dummy batteries that you could work with that would allow you to use a battery bank for powering the Mars M1. ZILR USB-C to Sony NP-F550 Dummy Battery Cable BH #ZIZRUCDB05

Q: 2. Is the Mars M1 Enhanced compatible with a Hollyland Cosmo C1 transmitter?

A: The Hollyland Mars M1 Enhanced 5.5" Wireless Transceiver Monitor is compatible with other options that are in the MARS series ( Mars 4K, Mars 400 S PRO, Mars 300 PRO). Unfortunately, it is not compatible with the Hollyland Cosmo C1.

Q: 3. Can this paper be used in an Epson t5270

A: This Epson Enhanced Adhesive Synthetic Inkjet Paper can be safely be used on an Epson SureColor T5270. The Epson SureColor T5270 printer can handle media that ranges from 3.1 to 59.1 mil in thickness and the Epson Enhanced Adhesive Synthetic Inkjet Paper is (within it's safe range) 5.0 mil thick.

Q: 4. Can you turn off the transmitting and receiving functionality?

A: The wireless function of the Hollyland Mars M1 Enhanced 5.5" Wireless Transceiver Monitor can be turned off in the Wireless section of the settings.

Q: 5. What is the purpose of the MAP-01 and MAP bushings?

A: The MAP-01 and MAP-02 bushings included with the Sunwayfoto MAC-14T Arca-Type & Manfrotto Compatible Clamp with Adapter Boss Set is for mounting the receiver clamp to an Arca-type, Manfrotto, or other ball head.

Q: 6. Is there a sunhood for this?

A: The Hollyland Mars M1 Enhanced 5.5" Wireless Transceiver Monitor can adapt the Hollyland Monitor Sun Hood for Mars M1 (B&H # HOHLSH01) as an added accessory.

Q: 7. Does this have false color?

A: Yes, the Hollyland Mars M1 has false color.

Q: 8. Does this transmit SDI with timecode?

A: The Hollyland Mars M1 Enhanced 5.5" Wireless Transceiver Monitor does not support Timecode via SDI/HDMI.

Q: 9. Has anyone used this for pulling focus? How is the latency?

A: The Hollyland Mars M1 Enhanced 5.5" Wireless Transceiver Monitor has significant latency that will likely not be acceptable in most cases for focus pulling, especially if there is not direct line of sight with the transmitter.

Q: 10. Does it can be paired with the Hollyland Pyro S 4K HDMI/SDI Wireless Video Receiver?

A: The Hollyland Mars M1 Enhanced 5.5" Wireless Transceiver Monitor is not compatible with the Hollyland Pyro S 4K HDMI/SDI Wireless Video Receiver at this time.