Inspired by the Ampeg B-15 tube bass amp, the A-Designs REDDI Mono Tube Direct Box with Throughputfrom A-Designs REDDI Mono Tube Direct Box with Throughputis an all-tube direct box for guitar, bass, and other instruments. The REDDI utilizes a 6N1-P tube-driven amplifier that feeds a hefty custom-wound Cinemag transformer, which imparts a harmonically rich tone. The wide-band frequency range (20 Hz to 60 kHz) prevents in-band phase shifts, resulting in outstanding detail and realism. Another benefit of the wide bandwidth is the prevention of low-frequency phase shift by maintaining a linear response extending below the audible bass range, ensuring a full, natural sound.

The REDDI features a Neutrik XLR-1/4" combo connector input, a balanced XLR output, and a 1/4" thru-put, for sending signal to an amplifier. Additional features include a 0-16 dB level control and blue LED indicator on the front panel, and heavy-duty toggle switches for power and ground lift on the back panel. The REDDI is made in the USA and ships with a standard IEC power cord.

For Guitar, Bass, and Other Instruments    Wide Frequency Range: 20 Hz to 60 kHz    Inspired by Ampeg B-15 Bass Amp    Warm, Transparent, High-Quality Sound    Level Control    Large Custom-Wound Cinemag Transformer    6NI-P Tube    Low-Z Transformer-Balanced Output    Made in the USA

• All-tube direct box with custom output transformer
• Ultra wide frequency range (20 Hz to 60 kHz)
• Neutrik combo XLR-1/4" input connector, balanced XLR out, and 1/4” thru jack
• Inspired by the Ampeg B-15
• Clean and airy high end, warmth, transparency, and high-quality sound
• Level control
• Ground lift
• Bright blue LED on/off lamp
• Zero-feedback loop design
• Massive, custom-wound transformers
• 6NI-P tube
• Low-Z, transformer-balanced output

Related Questions and Answers

Q: 1. Is there storage for a laptop & iPad ?

A: No, the Shimoda Designs DV Roller (Black) doers not have storage compartments for a laptop or ipad.

Q: 2. Can you use with a Sony FS100 with XLR input and will track be stereo when selected? Which mini to XLR adaptor?

A: The SMX-30 will put out the identical signal on the tip and ring when it's in mono mode so that you can feed the same signal to left and right inputs of your camcorder. I don't know the Sony FS100, but I'll assume it has a pair of female XLR sockets for left and right rather than a stereo 3.5mm socket. I have a Canon camcorder with XLR inputs, and what I use is a cable made by Hosa with a 3.5mm mini plug on one end and a pair of male XLR connectors on the other end. I can't find the model number on the Hosa site, but there other manufacturers of such cables. Search B&H or other vendor web sites for such cables. Since the SMX-30 also has a stereo mini plug, you'll also need to buy an adapter to connect two male mini plugs together (unless you can find a cable with the female mini stereo socket and pair of male XLR connectors).

Q: 3. Are 1.2V rechargeable batteries compatible?

A: Yes, you can use 1.2V rechargeable batteries such as the Panasonic Eneloop Pro Rechargeable NiMH Batteries with Charger - 2550mAh, Pack of 4 (B&H # PAKJ17KHCA4A) to power the Azden SMX-30V Stereo/Mono Mixable Video Microphone. Batteries must be charged in a charger, not while inside of the microphone.

Q: 4. is this carry on size?

A: The manufacturer does not label this bag as a carry-on, but it would be best to check with the specific airline for their restrictions.

Q: 5. Does it come with any dividers, or do you have to purchase them separately?

A: The Shimoda Designs DV Roller does not come with dividers. We recommend using the Extra Large DV Core Unit (B&H SKU: SHELDVV2) to properly protect your photographic equipment.

Q: 6. Can this accept mic level signals on XLR inputs 1&2? I want to use this on my mixer end for two mic signals to line level inputs

A: No. The ART Dual RDB Dual Re-Amping Direct Box accepts line level input only, as it does not include any mic preamps. The Dual RDB outputs mic level or instrument level audio signal. You could use a device like the Rolls MX310 MorMics 3-Channel Mic Mixer/Combiner (B&H # ROMX310), which will allow you to connect up to three XLR microphones and it has a single XLR output that is switchable for mic level or line level output.

Q: 7. Will it hold Nikon z6 with 70-200 and 2x converter?

A: The Shimoda Designs Top Loader (Black) is too small for the Nikon z6 and the Nikon NIKKOR Z 70-200mm f/2.8 VR S Lens.

Q: 8. Does this also take the place of adapter for lastolite softboxes?

A: No, it does not. It is made to connect accessories such as the Lastolite Snoot.

Q: 9. Will adding a mini male to female extension cable diminish the quality of recording? Need more than 8"....more like 10-20 feet?

A: This is fine to try and lots of people do it. The quality will diminish slightly but probably not enough to notice much. Running long cables for unbalanced microphone outputs has two negative effects. 1) Loss of high frequencies 2) Increased likelihood of picking up RF interference. The longer the cable the more these negative effects become apparent. Twenty feet is about the limit before these negative effects become very noticable. The quality of the cable will be a factor, as well as proximity to other wires and electronic devices.

Q: 10. Would this fit gfx 100 II and 45-100?

A: The Shimoda Designs Top Loader will not fit the FUJIFILM GFX100 II Medium Format Mirrorless Camera with the FUJIFILM GF 45-100mm f/4 R LM OIS WR Lens. I can recommend the Manfrotto Advanced III 4.5L Camera Holster (Large) instead, which will fit your camera and lens: https://bhpho.to/3U9GPWt.