This 3-stop, 4 x 5.65" NiSi Nano IRND Filter 4x5.65 3-Stopis an ND filter with an 8x filter factor that provides a 3-stop exposure reduction. Its 0.9 density creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed without overexposing your image. By slowing your exposure time or increasing your aperture, you are able to control depth of field and convey movement more easily. Neutral density filters are intended to not affect the coloration of the image and are ideal for pairing with other filters.

The design of this filter has been optimized for use with digital sensors and to promote nearly flat attenuation of visible and infrared light. Due to imaging sensors' greater susceptibility to infrared light, compared to traditional film, color casts can occur when photographing darker subjects that require increased exposure times. To provide a high level of neutrality across the visible and infrared spectrums in order to eliminate color casts and ensure cleaner, truer blacks when using the NiSi 4 x 5.65" Nano IRND 0.9 Filter, one layer of NiSi Optical Nano Coating is applied to each of this filter's surfaces.

This NiSi 4 x 5.65" Nano IRND 0.9 Filter is constructed from optical glass for clarity as well as color fidelity, and measures 4mm thick.

0.9 Optical Density    NiSi Optical Nano Coating    Optical Glass Construction    Darkens Entire Image    Allows Reduced Shutter Speed    Allows Wider Aperture    Neutral Results, Visible & IR Spectrums    Includes Leatherette Pouch

4 x 5.65" neutral density filter darkens the image, allowing you to photograph with a longer shutter speed or wider aperture than normally required.

Providing a 3-stop exposure reduction, this filter allows you to control depth of field and convey movement more easily.

Filter does not affect coloration of the image and is ideal for use with other filters.

Each surface includes one layer of NiSi Optical Nano Coating that attenuates infrared light as well as visible wavelengths, to maintain color neutrality and suppress color casts due to increased exposure times.

Constructed from optical glass for clarity.

Leatherette pouch included for storage and transport.

Related Questions and Answers

Q: 1. Is there a way to use a Bahtinov mask with this holder?

A: The NiSi 100mm Filter Holder for Nikon Z 14-24mm f/2.8 S Lens would require a Bahtinov mask that is 100mm wide and 2mm thick. Unfortunately, we do not have any of that size right now.

Q: 2. Is this filter specific for the lens or can I adapt it for other lenses with another adapter? If so, which adapters work?

A: You can get adapter rings that work with that holder to change ot to a different thread size. And this is a link for some of the rings, https://bhpho.to/3yEgtzE .

Q: 3. How can these 100 x 150 filters work on the Z 14-24 which has a 112 filter size?

A: If using a graduated 100 x 150mm filter for example, that would sit vertically in the NISI 100mm Filter Holder and would be adjusted up or down as needed.

Q: 4. Can this be used together with the new Nisi CPL for Z14-24mm lens ( to use CPL and ND at the same time)?

A: This filter holder mounts over the lens so the NiSi CPL can be screwed onto the lens as well. However, the square filters will prevent access to the polarizer making it difficult to adjust

Q: 5. Will this work with Tiffen filters?

A: The NiSi 100mm Filter Holder for Nikon Z 14-24mm f/2.8 S Lens can use any 100x100mm or 100x150mm filter that is 2mm thick,

Q: 6. I have NiSi v5 100mm square filter holder with a CPL that works on my 77mm and 82mm. And the system works well with the CPL and the square filters together. I'm asking if this filter holder for Z 14-24 will work with the CPL and the square filters I already have?

A: The NiSi 100mm Filter Holder for Nikon Z 14-24mm f/2.8 S Lens (B&H# NIP100NZ1424) will accept the 100mm wide filters (up to 2mm thick) just like those that you have been using on your NiSi V5 filter holder. As the NiSi representative has mentioned, the CPL from your V5 won't work with this. However, this NiSi filter may be of interest as it may be used without a holder (but requires the use of the Nikon lens hood): NiSi Pro Nano Natural Circular Polarizing Filter for Nikon Z 14-24mm f/2.8 S Lens (112mm) (B&H# NICPL112NZ): https://bhpho.to/3Hwnoz2

Q: 7. I have several 150mm filters that I use on a NISI holder, but they are not NISI filters. This info indicates that this holder will hold 2 150mm filters. Is that regardless of brand?

A: Yes, they will fit as long as they are 2mm thick.

Q: 8. Is there adapter for this NISI holder for Nikon NIKKOR Z 24-120mm f/4 S Lens (Nikon Z) ?

A: No, the NiSi 100mm Filter holder is designed and made for the Nikon Z 14-24mm f/2.8 S Lens.

Q: 9. Will this adapter work with other Nikon Z trilogy lenses such as the 24-70 f2.8 and the 70-200 f2.8?

A: You can use this adapter to fit the filter holder on the Nikon Z 24-70 2.8 https://www.bhphotovideo.com/c/product/1536059-REG/nisi_nip_v5alpha_ad82_82mm_adapter_for_100mm.html For the Nikon Z 70-200 2.8 you need the 82mm adapter above and also this adapter. https://www.bhphotovideo.com/c/product/1332052-REG/nisi_nip_v5_ad77_77mm_adapter_ring_for.html

Q: 10. I own this filter holder and want to use it on my 82 mm lenses. What adaptor is needed?

A: According to the manufacturer, the NiSi 100mm Filter Holder for Nikon Z 14-24mm f/2.8 S Lens, B&H # NIP100NZ1424 • MFR # NIP-100-NZ1424, is a lens adapter and a filter holder frame. They state you have a couple of options. You may purchase the NiSi 82mm Adapter Ring for V5 or V6 Series 100mm Filter Holders, B&H # NIPV5ALPAD82, or if you want to use a CPL with your 100mm filters, you may purchase the NiSi 82mm Adapter Ring for V6 100mm Filter Holder, B&H # NIPV6AD82, along with the NiSi 86mm Enhanced Circular Polarizer Filter for Select NiSi Filter Holder Kits, B&H # NIPV5CPLNC. Once you have the 82mm filter threads the above adapters provide, you may then use step-up rings to adapt the filter frame/filters to other lens sizes.