Pairing infrared attenuation and neutral density with a warming 85 filter, the Tiffen 6.6x6.6" Water White Glass 85/IRND 0.9 Filterfrom Tiffen 6.6x6.6" Water White Glass 85/IRND 0.9 Filteris an all-in-one solution to reduce exposure values and achieving neutral color. The neutral density portion of the filter offers a 3-stop exposure reduction for working with longer shutter speeds or wider aperture settings. The infrared portion attenuates infrared wavelengths to benefit working with CCD and CMOS sensors under difficult lighting conditions where infrared pollution can affect color balance. Finally, the addition of 85 warming filtration balances daylight to 3400K, tungsten balance to easier match varying color temperatures during a shoot. The filter is constructed from Water White optical glass for maintained clarity and measures 6.6 x 6.6" / 167.6 x 167.6mm to pair well with lightweight or clip-on matte boxes.

IRND and 85 Warming Combination Filter    3-Stop Neutral Density Filter    Attenuates Infrared Wavelengths    Greater Control over Exposures    Warming Filter Decreases Color Temp    Converts Daylight to Tungsten Balance    Water White Glass Construction

Alleviating the need to use multiple filters at once, this filter combines three distinct effects to reduce the number of filter surfaces in use.

IRND 0.9 filter offers a 3-stop exposure reduction to permit working with longer shutter speeds or wider aperture settings than normally required.

Infrared-attenuating design eliminates infrared bleed above 700nm, is proportionate to the neutral density value, and helps to ensure clean, accurate colors and true blacks.

Warming 85 filter decreases the color temperature and converts daylight balance to 3400K tungsten balance.

Constructed from ColorCore technology Water White optical glass for maintained image quality.

Measures 6.6 x 6.6" / 167.6 x 167.6mm and is ideally suited for use with lightweight clip-on matte boxes.

Related Questions and Answers

Q: 1. Is the Diameter Hole of the Rycote Baseball 19/20 0.7" or 0.8"?

A: The Rycote Baseball 19/20 has an adjustable opening with flexible tabs that will fit microphones that have a diameter of 19 to 20mm. It is better to use the metric measurements which are much more accurate than the rounded off imperial measurements as 19mm = 0.75" and 20mm = 0.79".

Q: 2. Will this fit the MKH416 and the MKH50?

A: The 416 will fit. The 50 will not.

Q: 3. Will my Nest gimbal head mounted on its tripod fit into this ba?

A: Would you please give us more details about the tripod and Gimbal models you are planning to fit in the TBL-85 bag?

Q: 4. How does this differ from the medium Super-Shield (B&H # RYSSKM), and can the super-shield replacement front pods (such as the B&H # RYSSRPS) be used with this (so I can also use it with my smaller mic), please?

A: Hi there; thanks for your question. The design is based on the Super-Shield, so other Super-Shiled parts will be compatible, including the front pods. The keyword with the Perfect for range is 'optimisation'; we have balanced and measured everything so that the windshield covers the vast majority of mics in the NTG range. Please read here for further info: a href= http://rycote.com/microphone-windshield-shock-mount/perfect-for-range/ target= _blank http://rycote.com/microphone-windshield-shock-mount/perfect-for-range/./a

Q: 5. Can the blip be mounted on camera hot shoe?

A: The threading on the bottom of the Rycote 010323 can technically be used to adapt to a camera hot shoe, like the WindTech CM-38 Photo Hot Shoe to 3/8"-16 Male Adapter B&H # WICM38), but it is not made for that and not ideal, as the Rycote 010323 tends to be on the bulky side, the weight offset that it would create may present an issue and it may also interfere with handling other components on your camera rig. The Rycote 010323 and other blimps are most often used on a boom pole, either handled by a boom pole operator in a field set up, or mounted to a boom pole and light stand, in a stationary set up.

Q: 6. Can I attach the Rycote Pistol Grip(MFR # 048438, 또는 MFR # 048401) to the Rycote Super-Blimp(MFR #010323)?

A: For the Rycote Super-Blimp Kit, the recommended pistol grip would be BH #RYPGRL • MFR #048401.

Q: 7. This item surprisingly didn't come with a pan handle. Can you recommend a compatible pan handle?

A: Unfortunately, there are no pan handles compatible for use with the GEEKOTO CT32X Gravity 85 Carbon Fiber Tripod with Ball Head. The GEEKOTO CT32X Gravity 85 Carbon Fiber Tripod comes with a ball head. Ball heads have knobs that allow you to control the pan axis on the head, but ball heads do not use pan handles. If you need a pan handle with your tripod, you would have to purchase a pan/tilt head separately such as the Oben PD-117 3-Way Pan/Tilt Head, B&H # OBPD117, or the Field Optics Research Ultra Low-Profile Pan Head, B&H # FIFPHULP, for your usage needs.

Q: 8. Would the shock mount in this kit be good to use by itself, or is it best to use a different shock mount if not intending to use the blimp?

A: The shock mount included in this blimp kit is very good, and would be find to be used on its own.

Q: 9. Does the lens provide electronic communication with the camera?

A: Yes, the Voigtlander Nokton 35mm f/0.9 Lens (FUJIFILM X) has contacts for electronic communication. Note, the lens is manual focus and does not support autofocus.

Q: 10. Where does the monopod come from? Is it one of the tripod legs that can be removed or the center column?

A: Yes. Center column can be removed to convert to a monopod and the unit is made in China.