The Kopul CBT-8 8-in-1 Cable Tester for Network Testingis a professional-quality cable tester that allows users to test the continuity of a wide variety of cables with a single device. It quickly identifies connectivity and ground problems in some of the most frequently-used cables, and makes troubleshooting audio and studio setups fast and effortless.

An six-way knob provides easy selection of the pins to be tested, LED indicators illuminate to show that each pin on the cable is properly connected. The CBT-8 can test cables with any combination of speakON XLR, RCA, 3-pin and 5-pin DIN, TS/TRS, and 3.5mm mini plugs. Two removable leads are included for testing any kind of wire or cable with jacks that are not included on this model. They also allow for testing connections when building or repairing cables .

The CBT-8 is ideal for home, project, and professional studio use. Constructed with a rugged all-metal case, the CBT-8 is a road-ready addition to the gig bag of musicians, engineers, and mobile DJs alike.

Tests 8 Connector Types    XLR, TS/TRS, speakON, RCA, DIN & 3.5mm    Simple & Convenient Operation    Selector Knob Tests Each Pin on Cable    Leads for Testing Additional Connectors    Durable All-Metal Construction    Runs on One 9V Battery

Provides easy and simple continuity testing for cables with any combination of speakON, XLR, RCA, 3-pin DIN, 5-pin DIN, TS/TRS, and 3.5 mm mini plugs

Rotary knob selects each pin on the cable to confirm connectivity and continuity

A battery check LED warns when the battery needs to be charged or replaced. The ground status check LED lights when a ground loop (short-circuit) is detected

Two removable leads are included to verify continuity of additional connectors and are useful when constructing or repairing cables

Heavy-duty, all-metal construction assures extended use in studio and on the road

Related Questions and Answers

Q: 1. Can this run 4 or 6 ohm speakers?

A: The Onkyo TX-8470 Stereo Network A/V Receiver (BH # ONTX8470) are designed for 8 ohm speakers but will operate with 4 -6 ohm speakers as well.

Q: 2. Does this device help me determine the life of my Powerex Pro Rechargeable AA NiMH Batteries? Will it tell me the total rechargeable life of the batteries and not only how much current charge is in them?

A: No, this tester only tells you battery charge and how it reacts to a load, it does not tell you the longevity of the battery.

Q: 3. can you recommend a longer cable to work with this adapter?

A: Since this is an impedance matching transformer, it would be recommended to use an XLR cable of the length of your choice to connect to the XLR female side in order to extend.

Q: 4. Will the mixer introduced latency?

A: No, the Kopul CMCS-1 Passive 3.5mm Microphone Combiner/Splitter should not introduce any latency to the signal chain.

Q: 5. I got this cable with the Senn 600 and when plugged into my Canon 80D it only registers on the LEFT channel, is this because of the cable or because the Senn is a mono mic? Do I need to do something else to have it record bother left and right channels, there are no options on the 80D for that, thanks.

A: The LMT-100 is specifically designed for connection of a mono mic to a camera. Audio should be present on both sides using this cable and should have no issues with the Sennheiser or similar mics. We do however generally recommend the Sennheiser brand cable (KA-600). https://bhpho.to/2gPQ0Wn Please contact a Representative here for additional assistance at 800-606-6969.

Q: 6. if i connect my 100 ohm mic to my dslr 3.5 jack using this transformer, will the recorded sound still have around 100 ohm impedance?

A: This is an impedance matching transformer. It will convert your 100 ohm mic to approx. 2000-3000 ohms to match your cameras mic input. Recorded audio is not measured in impedance, but decibels.

Q: 7. Is this really a transformer, or a simple adapter. If a transformer, what is the ratio?

A: It is a transformer designed to work with DSLRs and consumer grade camcorders. The impedance match specs are not available.

Q: 8. Do this come with remote control?

A: Yes, the Onkyo TX-8470 Stereo Network A/V Receiver comes with a remote control.

Q: 9. Will this work on a Sennheiser shotgun mic?

A: Yes but the Sennheiser KA-600 BH #SEKA600 tends to be more popular for that.

Q: 10. If a device supports sending phantom power out of its 3.5mm mic input, will this adapter/transformer pass the phantom power up the XLR cable to the mic?

A: We could not guarantee that 48v phantom power would pass properly through this type of adapter if being used with a balanced 3.5mm jack with phantom power output.