The 1MP Cube Camera from ACTi 1MP Indoor Cube Camera 4.2mm Lens Terminal Blockfeatures a 1/4" progressive-scan CMOS image sensor to deliver high-quality images at a resolution of up to 1280 x 720 at 30 fps. The 4.2mm fixed lens with an f/1.8 aperture provides a 53.8° horizontal field of view. Wide dynamic range, white balance, automatic gain control, and digital noise reduction features allow for clear images when there is ambient lighting or in low-light scenarios.

Motion Detection triggers an alarm when movement is detected in a designated portion of the video display, and 4 configurable privacy masking regions enable you to block certain portions of an image for security reasons. A built-in microphone and a 3.5mm jack offer two-way audio, enabling you to communicate with those you are monitoring. The camera also comes with a terminal block which allows you to attach an additional speaker and/or microphone.

1/4" Progressive-Scan CMOS Sensor    1MP Resolution @ 30 fps    4.2mm Fixed Lens    53.8° Horizontal Angle of View    H.264 and MJPEG Compression    Built-In Microphone    PoE Power Source    Simultaneous Dual Streaming    4 Configurable Privacy Masks    CS Lens Mount

Progressive scan CMOS sensor

Minimum illumination of 0.1 lux at f/1.8

Built-in 4.2mm lens allows you to record footage in 1MP resolution at 30 fps

Selectable H.264 and MJPEG compression formats with dual streaming

Two-way audio (speakers available separately)

Video motion detection

Powered by PoE Class 2

Related Questions and Answers

Q: 1. What is the difference between large and small Block?

A: The Large socket block for compatibility with Archer, M-1, Shadow & Ultra2 systems. The Small socket block is for compatibility with Zephyr systems.

Q: 2. Will it work on a mic stand?

A: If your mic stand has a 3/8"-16 or 1/4"-20 mount, the Lume Cube Ball Head Camera Mount would be able to mount to it.

Q: 3. Can you put a Sony 600mm f4 attached to a Sony Alpha One in the large cube?

A: Unfortunately, the Sony FE 600mm f/4 GM OSS Lens does not fit inside of the Peak Design Camera Cube V2 (Black, Large).

Q: 4. does this come with the battery pack?

A: It comes with a AA Battery Adapter. You must supply the actual batteries. If you have Sony L-series, M-series, and H-series batteries or Panasonic D16/D28 batteries, you are also good to go.

Q: 5. Can I use it for Sony a7 r 2 camera for taking photos

A: While this light does not offer flash, you can still use it for taking photos with an A7RII. Many Photographers are now utilizing constant light for photography.

Q: 6. Can this be attached to a standard baseplate or do you have to have the movecam baseplate?

A: The riser block is cut with a dovetail on the bottom intended to slide into the Movecam baseplate. However, the riser block is also drilled and tapped on the bottom for one centered 3/8 hole and four additional 1/4 holes. So, I'd say it's possible to mount the riser on a standard baseplate.

Q: 7. Will this cube fit inside Shimoda Explore 35? I'm looking for something that can fit a 600mm gm in Shimoda explore 35.

A: The WANDRD Pro Deep Camera Cube (Black) will not fit in the Shimoda Explore 35.

Q: 8. Does om-1 with the 150-400mm lens attached fit in the large cube? Thanks.

A: The Peak Design Camera Cube V2 (Black, Large) interior dimensions are 16.9 x 11.4 x 5.3". The OM SYSTEM OM-1 Mark II Mirrorless Camera connected to the OM SYSTEM M. Zuiko 150-400mm f/4.5 TC 1.25 IS PRO Lens is 4.8'' wide and would total 14.5'' in length with the lens hood on reverse; therefore, the lens and the camera will fit in the Peak Design Camera Cube V2 (Black, Large).

Q: 9. How does this compare with a regular camera mounted flash in terms of brightness?

A: Since the CNS-40B Constructor Large Block Bi-Color On-Camera LED Light is a continuous light it cannot be compared to a flash.

Q: 10. Does this light have an DC power input?

A: Yes it does. We recommend this AC power supply for it. https://bhpho.to/3dML7MV