Install the Ubiquiti PowerBeam M5 ISO 5GHz AirMAX Bridge 5-Packfrom Ubiquiti PowerBeam M5 ISO 5GHz AirMAX Bridge 5-Packinto a variety of network configurations including point-to-multipoint, wireless client, or point-to-point and take advantage of enhanced beamwidth technology. Combined with RF isolation to filter out noise, it delivers a cleaner and more reliable connection. Built-in airMAX technology utilizes the Time Division Multiple Access (TDMA) signal which breaks down the signal into specified time slots to reduce collisions. As a result, you receive reduced latency, noise immunity, and improved throughput.

Atheros MIPS 74Kc, 560 MHz CPU    64MB RAM / 8MB Flash Memory    1 x 10/100 Ethernet Port    Passive PoE Power Method    25 dBi Gain    5725-5850 MHz Operating Frequency    Dual Linear Polarization    Pole Mounting Kit Included

The PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity, RF isolation, and QoS, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency.

Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is versatile and cost-effective to deploy even at long distances.

Unlike standard Wi-Fi protocol, Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class

airOS is a versatile, highly developed Ubiquiti firmware technology. It is intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture, which enables high performance, outdoor multi-point networking.
• Protocol Support
• Ubiquiti Channelization
• Spectral Width Adjustment
• ACK Auto-Timing
• AAP Technology
• Multi-Language Support

Integrated on all Ubiquiti M products, airView provides advanced spectrum analyzer functionality: waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference.
• Waterfall Aggregate energy over time for each frequency.
• Waveform Aggregate energy collected.
• Real-time Energy is shown in real time as a function of frequency.
• Recording Automate airView to record and report results.

airControl is a powerful and intuitive, web-based server network management application, which allows operators to centrally manage entire networks of Ubiquiti devices.
• Network Map
• Monitor Device Status
• Mass Firmware Upgrade
• Web UI Access
• Manage Groups of Devices
• Task Scheduling

Innovative Mechanical Design
• Metal-plated interior of rear housing enhances RF shielding.
• Built-in mechanical tilt mounting bracket offers ±20° of tilt.
• Convenient pole mounting with a single wrench to mount the PowerBeam ISO on a pole.
Industrial-Strength Construction
• GEOMET-coated fasteners for improved corrosion resistance when compared with zinc-plated fasteners.
• Dish and brackets made of galvanized steel that are powder‑coated for enhanced corrosion resistance.
• Protective radome shields protect the radio from nature's harsh elements.
RF Isolation
The integrated isolator design spatially filters out interference, so the PowerBeam ISO delivers improved noise immunity in co-location deployments.

Related Questions and Answers

Q: 1. Is this listing for 2 pack of rocket dish?

A: Yes, this would be a 2 pack

Q: 2. so can you have multiple of these, like one as host and others as client and limit the speed of each "client" individually?

A: Yes within the AirOS this can be done.

Q: 3. what's the difference between item R5AC-LITE-US and RM5-AC-PTP-LITE ?

A: The difference is the operating frequency, the RM5-AC-PTP-LITE is Worldwide: 5150 - 5875 MHz and R5AC-LITE-US is USA: 5725 - 5850 MHz

Q: 4. Is this the international model version?

A: This is a US model.

Q: 5. I have a scenario where I need to use 3 units since I don't have direct line of site between the 2 points. Is that possible?

A: The Ubiquiti Networks airMAX NanoStation M2 Single-Band Indoor / Outdoor CPE Bridge is capable of point to point and point to multipoint communications. It can be used with multiple units.

Q: 6. Is this the same as the Bullet M2, but now covers both bands (2.4 and 5ghz)?

A: Yes, this is a dual band version of the MX, with updated software.

Q: 7. Hello do you get two dish antenna ? And can i use both of them to bridge two buildings ?

A: No, unfortunately this would be a single unit. Other hardware would be required to bridge the two points together.

Q: 8. Can work this model as a router?

A: You will still need a router as this will only shoot internet connection to another location. If site A has a router and you get them hooked up you would only need a switch on site B. Hope this helps

Q: 9. Is this Nano Beam allow me to connect to the internet from my cousin's house at 500 meters in the Dominican Republic? If this is the case, do I need two Nano Beams?

A: Using two of them with line of sight and no obstructions, yes, you could do that using 2 x NBE-5AC-GEN2.

Q: 10. What is the range?

A: The range will be determined by the antenna used.