The 5-stop, 4 x 5.65" Tiffen Hard-Edge Graduated ND Filter 4x5.65" 5-Stopis a graduated neutral density filter that helps to specifically darken skies and other bright areas of the image. The filter is densest at the edge and tapers to clear by the middle, with a hard-edged line of transition between the density and clear areas. Neutral density filters do not affect the coloration of the image and the 1.5 density provides a 5 stop reduction in light from entering the lens.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. This filter measures 4 x 5.65" / 101.6 x 143.5mm.

Note: A horizontal orientation filter's line of transition runs parallel to the long side of the filter.

1.5 Optical Density    ColorCore Technology    Reduce Exposure in Selective Areas

Hard-edged 1.5 ND graduated filter for darkening skies and other bright areas of the image.

Provides a 5 stop reduction in light in selective areas.

Neutral density filters do not affect the overall coloration of the image.

Related Questions and Answers

Q: 1. Will this work for the Canon EOS R?

A: As long as you can properly rig the pairing, the battery protocol is the same.

Q: 2. How long will this power the BM4K?

A: This battery is around 3.5x the capacity as the LP-E6 style battery the Pocket 4K/6K normally uses. You should expect this to get around 3.5x the power. If an LP-E6 is giving you 45 minutes then this should give you 150 minutes or so.

Q: 3. (full small rig ), can you attach a quick release on bottom. then attach this. has anyone tried quick release;;3 Legged Thing Switch Clamp v2, thanks?

A: The Power Base Edge comes with its own quick release system. However, you could mount another quick release adapter (Such as Really Right Stuff B2-LR-II Lever-Release Clamp, an arca style) to it if you prefer to use a different style plate.

Q: 4. Can this work with a red komodo?

A: Yes, but you will need a different cable or battery adapter.

Q: 5. How This Powerbase Charge?

A: The wall charger is included in the box with this product.

Q: 6. Will this work with the Panasonic DC-G9?

A: Yes, The Core SWX Powerbase EDGE Cable for Panasonic DMW-BLF19 Devices would work with the Panasonic GC-G9 camera. See this link for a full kit with battery that will work with your camera model. https://bhpho.to/32PcsNo

Q: 7. Could I use this with my fujifilm xt3 and use the usb ports to power the camera through the cameras usb port? Hard to find the correct dummy batteries for fuji.

A: We suggest using this D-Tap cable instead. https://bhpho.to/3plhk25

Q: 8. can it work with the following product? : https://www.bhphotovideo.com/spanish/c/product/1276803-REG/lanparte_lp_e17_battery_dummy_pack.html

A: The Lanparte LP-E17 dummy battery pack will not work with this Powerbase EDGE for the Blackmagic Pocket Camera 6K & 4K since the size of the female barrel connector on the Lanparte is 2.1/5.5mm and the powerbase uses a 2.5mm barrel connection. While both are 7.4V, a two male ended cable with the two different sized connections has yet to be found.

Q: 9. How much current can each USB connector output?

A: Each of the USB ports on the Core SWX Powerbase EDGE V-Mount Battery, would be 5V.

Q: 10. What are the dimensions of the male barrel plug on the dummy battery and the female connection on the battery? I need to extend the length of this cable.

A: The size is not listed. However Core SWX offers the Powerbase Edge Cable Extension (18"), B&H # COPBECEXT. If you need to extend the cable for the dummy battery with this product, this is the part you will need. https://bhpho.to/2VWbkTB